1. 21:09:48
  2. // probe at 205.000,150.000 is z=-0.726250
  3. 21:09:49
  4. // probe at 205.000,150.000 is z=-0.727656
  5. 21:09:50
  6. // probe at 205.000,150.000 is z=-0.727813
  7. 21:09:53
  8. // probe at 260.000,150.000 is z=-0.732031
  9. 21:09:54
  10. // probe at 260.000,150.000 is z=-0.734375
  11. 21:09:55
  12. // probe at 260.000,150.000 is z=-0.735625
  13. 21:09:58
  14. // probe at 260.000,205.000 is z=-0.727031
  15. 21:09:59
  16. // probe at 260.000,205.000 is z=-0.728594
  17. 21:10:00
  18. // probe at 260.000,205.000 is z=-0.730000
  19. 21:10:03
  20. // probe at 205.000,205.000 is z=-0.714375
  21. 21:10:04
  22. // probe at 205.000,205.000 is z=-0.714219
  23. 21:10:06
  24. // probe at 205.000,205.000 is z=-0.715313
  25. 21:10:09
  26. // probe at 150.000,205.000 is z=-0.674375
  27. 21:10:10
  28. // probe at 150.000,205.000 is z=-0.675625
  29. 21:10:11
  30. // probe at 150.000,205.000 is z=-0.677031
  31. 21:10:14
  32. // probe at 95.000,205.000 is z=-0.690625
  33. 21:10:15
  34. // probe at 95.000,205.000 is z=-0.691719
  35. 21:10:16
  36. // probe at 95.000,205.000 is z=-0.692500
  37. 21:10:19
  38. // probe at 40.000,205.000 is z=-0.701875
  39. 21:10:20
  40. // probe at 40.000,205.000 is z=-0.702813
  41. 21:10:21
  42. // probe at 40.000,205.000 is z=-0.702969
  43. 21:10:24
  44. // probe at 40.000,260.000 is z=-0.638125
  45. 21:10:25
  46. // probe at 40.000,260.000 is z=-0.640156
  47. 21:10:27
  48. // probe at 40.000,260.000 is z=-0.640625
  49. 21:10:29
  50. // probe at 95.000,260.000 is z=-0.640313
  51. 21:10:31
  52. // probe at 95.000,260.000 is z=-0.640469
  53. 21:10:32
  54. // probe at 95.000,260.000 is z=-0.642188
  55. 21:10:35
  56. // probe at 150.000,260.000 is z=-0.643125
  57. 21:10:36
  58. // probe at 150.000,260.000 is z=-0.645156
  59. 21:10:37
  60. // probe at 150.000,260.000 is z=-0.646563
  61. 21:10:40
  62. // probe at 205.000,260.000 is z=-0.662969
  63. 21:10:41
  64. // probe at 205.000,260.000 is z=-0.664063
  65. 21:10:42
  66. // probe at 205.000,260.000 is z=-0.664688
  67. 21:10:45
  68. // probe at 260.000,260.000 is z=-0.676250
  69. 21:10:46
  70. // probe at 260.000,260.000 is z=-0.678125
  71. 21:10:47
  72. // probe at 260.000,260.000 is z=-0.679219
  73. 21:10:48
  74. // Mesh Bed Leveling Complete
  75. 21:10:48
  76. // Bed Mesh state has been saved to profile [default]
  77. // for the current session. The SAVE_CONFIG command will
  78. // update the printer config file and restart the printer.
  79. 21:11:57
  80. // Moving filament tip 0.0mms
  81. 21:11:57
  82. // KAMP purge is not using firmware retraction, it is recommended to configure it.