Open Source Windows Computational Fluid Dynamics (CFD) Software

OpenFOAM - The Open Source CFD Toolbox. OpenFOAM is a generic, programmable software tool for Computational Fluid Dynamics (CFD). For more information, see: - Main Website: https://openfoam.org - C++ Source Documentation: https://cpp.openfoam.org - Issue (Bug) Tracking: https://bugs.openfoam.org - User Guide: https://cfd.direct/openfoam/user-guide

cfMesh is an open-source library for volume mesh generation based on OpenFOAM. It implements various meshing workflows for volume mesh generation needed for CFD simulations with OpenFOAM. It is already a part of foam-extend, OpenFOAM for Windows, Caelus and OpenFOAM+ released by ESI. This repository is intended for contribution and collaborative development. If you have a new meshing algorithm or interested in contributing to cfMesh, do not hesitate to contact us. Please note that this code is not the same as CF-MESH+, which is a commercial product offered by Creative Fields Holding.

The foam-extend project is a fork of the OpenFOAM® open source library for Computational Fluid Dynamics (CFD). The goal of this project is to integrate community contributions to the foam-extend CFD simulation toolbox. It is an open project welcoming and integrating contributions from all users and developers.

Code repository hosted at https://gitlab.com/hisa/hisa

The project is an update of the work by the OpenFOAM Turbomachinery Working Group, that was initiated at the Second OpenFOAM Workshop in Zagreb, June 2007. Objectives: * Develop OpenFOAM and FOAM-extend extensions for turbomachinery applications, including pre-processing, solution methods, and post-processing. * Provide tutorials on how to produce accurate results using OpenFOAM and FOAM-extend in turbomachines. * Distribute relevant validation test cases and corresponding OpenFOAM and FOAM-extend applications. * Provide a test-harness for new releases of OpenFOAM and FOAM-extend. * Provide Best Practice Guidelines for CFD in turbomachines. Find instructions by clicking on the Wiki tab Disclaimer: The trade mark of the OPENFOAM name is held by ESI-OpenCFD. This offering is not approved or endorsed by OpenCFD Limited, producer and distributor of the OpenFOAM software and owner of the OPENFOAM® and OpenCFD® trade marks.

ISAAC (Integrated Solution Algorithm for Arbitrary Configurations) is a computational fluid dynamics (CFD) code developed to test and apply high order turbulence models for compressible flows around complex geometric configurations.

FFTW++ is a C++ header class for the FFTW Fast Fourier Transform library that automates memory allocation, alignment, planning, wisdom, and communication on both serial and parallel (OpenMP/MPI) architectures. In 2D and 3D, hybrid dealiasing of convolutions substantially reduces memory usage and computation time. Wrappers for C, Python, and Fortran are included.

This solver represents an addition to the open-source CFD package OpenFOAM. The solver is used to simulate the deflagration-to-detonation transition in hydrogen-air mixtures. Prominent features are described below. Additional description is available in the pdf file included. For a more detailed description download Florian Ettner's thesis (in German) from http://www.td.mw.tum.de/tum-td/de/forschung/dissertationen/download/I2013/Ettne13.pdf [8.6 MB] A shorter description (in English) can be found in the following publiction: http://www.hindawi.com/journals/jc/2014/686347/

Construct2D is a grid generator designed to create 2D grids for CFD computations on airfoils. The grids are generated in Plot3D format. The only required input file is the set of coordinates defining the airfoil geometry, using the same format as XFoil, the popular vortex-panel code for airfoil analysis. Construct2D can create grids with O topology (recommended for airfoils with a blunt trailing edge) or C topology (recommended for airfoils with a sharp trailing edge). Now available in version 2.0: hyperbolic grid generation to create higher quality grids in a fraction of the time compared to elliptic grid generation. Elliptic grid generation is still available also. Smooth airfoil surface spacing is handled automatically with user-controlled clustering parameters. Also included is a visualizer written in Python with matplotlib.

OpenVLAB is an open source integrated framework for the numerical simulation of fluid flows (CFD) based on the resolution of Navier-Stokes equations. It is designed for analysis, design & optimization on airfoils, wings, wind-turbine, and much more..

OpenFVM is a general open source three-dimensional Computational Fluid Dynamics (CFD) solver (for Linux and Windows). It uses the unstructured finite volume method to simulate non-isothermal transient flow. Gmsh is used for pre- and post- processing.

The ADFC code is a computational fluid dynamics (CFD) C++ solver for incompressible viscous flow over 2D and 3D geometries. It uses finite element and the characteristic method on unstructured meshes to solve Navier-Stokes equations.

Computational Fluid Dynamics (CFD) solver aimed to solve multi-physics problems on unstructured grids (inviscid Euler, Navier-Stokes flows, Heat transfer). F90 based. MPI, cgns, Metis libraries used.

This is the native MS windows release of OpenFOAM, an open source toolbox for Computational Fluid Dynamics (CFD). It was built with MinGW C++ as a set of native windows applications, which improves performance and eliminates the need for Unix emulations.

OVERVIEW is a framework for optimization that integrates the visualization of complex fluid solutions and geometries taking advantage of the high performance and cutting edge rendering techniques of modern graphic cards.

It uses Navier-Stokes equation as the physical model, the numerical solution obtained by real-time calculation includes scalar and velocity fields displayed in the OpenGL control. Users have a choice of 64x64 and 128x128 resolutions and 7 color options. Its core algorithm of the simulation process refers to Robert Bridson's Fluid Simulation for Computer Graphics. It uses the numerical solution of Navier-Stokes equations to predict the density and velocity distribution of particles in each frame displayed in the OpenGL widget of Qt. There are two resolution options for users: 64 x 64 and 128 x 128. Users can also change display mode between density and velocity in 7 colors.

General CFD package, including grid generator and flow solver, CGNS compatible; V0.2.1 released 09/03/04.

Polaris CFD is a complete CFD software suite for Aerodynamics simulations created by Alta Dynamics. It is validated to provided accurate results for both internal and external flow problems. Its viewer is built on ParaView for pre and post processing.

ENGRID is a mesh generation software with CFD applications in mind. It supports automatic prismatic boundary layer grids for Navier-Stokes simulations and has a Qt based GUI.

Computation Fluid Dynamics Source Code Collection Navier-Stokes equations - Chorin Projection method ( 2D ) Lattice Boltzmann method ( 2D , 2 phase ) Smoothed Particle Hydrodynamics ( 2D , 3D , freesurface )

CFDTool - "CFD Simulation Made Easy" CFDTool is a fluid dynamics toolbox for modeling and simulation of flows with coupled heat transfer. Based on FEATool Multiphysics (https://www.featool.com), CFDTool is specifically designed to make advanced fluid mechanics and heat transfer simulations both easy and enjoyable. - Completely stand-alone and cross-platform self-contained toolbox - Optionally use as MATLAB Add-On toolbox - Fully integrated and easy to use MATLAB GUI - Modeling and simulation in 1D, 2D, 3D, and axisymmetric/swirl/cylindrical coordinate systems - Seamless OpenFOAM GUI and SU2 CFD solver integrations (https://www.featool.com/Easy-to-Use-OpenFOAM-GUI) - Built-in geometry and CAD tools - Automatic mesh and grid generation - Pre-defined equations and boundary conditions for: + Incompressible viscous fluid flows (Navier-Stokes equations) + Compressible, supersonic, trans-sonic, and turbulent flows + Heat conduction with conjugate heat transfer

Lata is a file format to store CFD results, with special care for huge datasets. This project provides tools for manipulate and convert the lata files. This project is part of the VisIt plugin reader. The Snorky3D sofware is presented in the following conference communication: Visualisation of CFD computations: millions of particles in real time with Snorky3D Visu 2012, september 2012, Paris, France http://visu2012.imag.fr/articles/mathieu.pdf

CFD scientific software. Provides simulation of 3D CFD problem based on Quasi-Gas Dynamics approach with radiation processes token into account. Lots of spectral intervals are considered. Parallel MPI/OpenMP-based implementation is provided.

lightweight fast drafting and 3d simulation program. Currently Freeware, Open Source. Finished Program will be offered as a single seat license or corporate license.