Open Source Assembly Robotics Software

What is it? It's a Bootloader for Microchip, Atmel, NXP, TI and 8051 devices. A Bootloader is a firmware running in the microcontroler device which allows the user to send it's own firmware without the need of a programmer. This Bootloader consists of: - firmwares for many devices (this firmware need to be send to the device's flash memory with a programmer, only once) - a PC software which communicates with the bootloader firmware in the device and send the user's program in its memory Where does it come from? This Bootloader is based on "Tiny PIC Bootloader" made by Claudiu Chiculita. A special THANK to him!!! What can it do? It can program: - Microchip PIC10/12/16/18/24/32/dsPIC30/33 - Atmel ATtiny, ATmega - TI MPS430 - NXP ARM Cortex-M0+ - Silicon Labs C8051 And this: - with light modifications to the Bootloader firmware for new devices - without modifying your source code or using a special linker script - via GUI or command line prog - with automatic Reset

This project has been moved to http://pros.cs.purdue.edu/ PROS is a lightweight and fast alternative operating system for the VEX Cortex Microcontroller. It features multitasking, low-level control, and Wiring compatible functions to harness the full power of the Cortex. With a real-time kernel based on FreeRTOS and a development environment built on Eclipse CDT, PROS uses proven software to increase the reliability and usability of the VEX development system across all three major computing platforms. PROS is currently under active development to make it usable for VEX high school and middle school teams. PROS is intended for advanced VEX users seeking to move beyond competing environments. Eclipse and FreeRTOS have their own licensing agreements. Please see http://www.eclipse.org/legal/epl-v10.html and http://www.freertos.org/a00114.html for details.

lysis is working on a features rich home automation system that ranges from CAN-bus, 1-wire and RF up to a HTPC; both hardware and software are addressed to make the really smart home; the domotics will provide energy saving, comfort, flexibility, safety

This project will use 3D Human Emulation using sensors to pickup human movements and displaying them on GUI for analysis.

A scheme (lisp) interpreter written in ARM assembly language (currently: Cortex-M4F,M7, Cortex-A5,A8,A9, Cortex-A53; previously:ARM7TDMI, ARM920T, Cortex-M3) for education, robotics, wearable devices. Tested on Allwinner A64, Amlogic S905, Atmel SAMA5D4, SAME70, SAMV71, NXP LPC4300, RT1050, iMX8M, Samsung S5P6818, ST STM32F4, STM32F7, and TI AM3359, OMAP3530, DM3730, OMAP4430, TM4C1294 chips (previously: NXP LPC-1300,1700,2000, ATMEL AT91SAM7, STM STR711, STR911, STM32, CIRRUS EP9302, LMI LM3S1968, TI OMAP).

B.O.T.S (Bots Tactical Simulation) is a programming game, where players "code" the behaviour of their bot and watch them fight with others bots in a arena. It comes with a full environnement in Java/Swing, for coding, debugging, playing matchs, etc ...

Custom uav is a complete flight control system in development. The project includes everything required for unmanned flight.

The project is investigating the use of sensor information to be used in context aware applications.

Embedded uC software for a CrazyCar (see crazycar.fhbb.ch). This project generates code for various microcontrollers e.g. 8051, AVR, Fujitsu.

EQ Track purpose is to provide amateur telescope makers (ATM) with electronic board schematics and embedded software to control their telescope mount via stepping motors. EQ Track comes in different "flavors" : - "Basic" controls the right ascension and declination motors of an equatorial mount. - "Go To" controls the motors of a mount in any orientation (ie. equatorial, altazimuth, alt-alt), to point and track equatorial coordinates.

Firmware and GUI code for the Geckodrive G200X motion controller

GROKI is an OpenSource-Project (GNU) that deals with Control and Programming of (small) mechanical Robots. HW: µC/MCU OS: Linux/Unix GUI: GTK PLs: C++ and Assembler

This is the Galileo CPE Lyon developpement site. The main goal of the project is to build an independent robot able to interact with its environement.

‘intelliworm’ is a prototype simulation of a Intelligent Species of a common earth worm,which inherits human like decision making capabilities through Neural Network intelligence representation,all developed by integrating .NET with Lisp and Yacc.

Keep It Simple Bus is a PC+MCU based Robotics Framework that utilizes serial port to interface to multiple DC/Servo/Stepper motors through PIC12F683 ising binary protocol. Main goal is to do it as cheap as possible with minimal number of components, fast

MERP is a modular low cost robot platform designed as a research tool or for personal use. It allows real world testing of algorithms developed in simulation for trajectory planning, obstacle avoidance, human robot interaction, among others.

C compiler for 8-bit microcontrollers, currently targeting the PIC 16F series

MogoBot is a small stepper motor driven robot that can easily be used by adults and kids alike. The robot follows LOGO like commands. The robot utilizes a Z8 Encore processor, and Mitsumi Stepper motors for motivation.

Universal CNC (Computer Numerical Control) system with accompanying communication and graphics libraries

This is a attempt for simple hardware emulator of Celestron's NexStar Telescope mounts. The emulator is based on MCUs like PIC18F2550 from Microchip Technology Inc.

OpenWebServo is an Open Source Hardware and Software project. Its main goal is to develop a web-controlled servo system. The project includes web application, firmware and hardware design.

Some basic programms concerning the PIC Micro Series starting with the PIC 16F676 written in asm and c

Co-operative Task Scheduler for PIC based software. Written using gpasm / mpasm macros.

This is the worlds first and probably only FLOSS project aimed to create a lowbudget, based on availble technology, cruise missile. No this is not a Joke, its for real. Why? Since no one has tried to do this before and certainly not under the GPL.

This project is a project to make a small robot using Linux as the OS.