astlinux-devel Mailing List for AstLinux

I was trying to get a Netgear WG111v3 USB WiFi stick working on an old machine 
that I intend to use as an Astlinux box. When I plugged it in, I got messages 
about undefined symbols "led_classdev_register" and "led_classdev_unregister" 
(and the adapter wouldn't work).

After figuring out how to build my own, I tracked down the problem: the kernel 
config file needs to include CONFIG_NEW_LEDS.

I've included a patch (for geni586). I assume it would need to be changed for 
other platforms that support USB as well.

On 19/07/11 18:28, Alexander Kluchnikov wrote:
> Hi everyone!
> I choose the platform for a new project, I think astlinux is a good 
> option for me ... There are a couple of questions:
> 1) Astlinux will work fine on powerful machines such as HP Proliant 
> DL120 and better?
> 2) How to add MySQL? I understand that you need to add it to 
> thepackages toolchain?
> ps: sorry for my english, I'm Russian  ;)

It's probable that Astlinux is not the right distro for you.  Astlinux 
is designed to be installed onto small, embedded systems, not on to 
servers.  It's built to be small, simple and functional.  Adding MySQL 
would require modification of the build system to include MySQL and for 
the entire Astlinux distro to be recompiled.

I would suggest you look at PBX in a Flash, Elastix, AsteriskNOW or Trixbox.

Hi everyone!
I choose the platform for a new project, I think astlinux is a good option for
me ... There are a couple of questions:
1) Astlinux will work fine on powerful machines such as HP Proliant DL120
and better?
2) How to add MySQL? I understand that you need to add it to thepackages
toolchain?
ps: sorry for my english, I'm Russian  ;)
-------------------------------------------------------
Best regards, Switch.
mail: sw...@ly...
tel:    +7 347 2933713
mob: +7 917 7515862
icq:  125431303

The AstLinux Team would like to announce the immediate availability of the 0.7.9 release.  This release includes either Asterisk 1.4.42 or
Asterisk 1.8.4.4.  All current users are encouraged to upgrade to this release to take advantage of bug fixes and other updates to Asterisk.

A full changelog is available at http://www.astlinux.org

Current users can upgrade from the web interface or from the commandline.

>From the CLI:

(Asterisk 1.4)
  upgrade-run-image check http://mirror.astlinux.org/firmware
  --should report astlinux-0.7.9
  upgrade-run-image upgrade http://mirror.astlinux.org/firmware

(Asterisk 1.8)
  upgrade-run-image check http://mirror.astlinux.org/ast18-firmware
  --should report astlinux-0.7.9
  upgrade-run-image upgrade http://mirror.astlinux.org/ast18-firmware

--
The AstLinux Team
http://www.astlinux.org

Hi list,

I created an new Astlinux Wiki page that explains how to setup 
OpenVPN Access Policies in Astlinux. That way multiple OpenVPN users 
can have different access rights to the network.

http://doc.astlinux.org/userdoc:openvpn_access

Michael

http://www.mksolutions.info