#28 Multiple problems during install and initial config
Windows 2000 Server 1.5GB RAM fully patched
New install of coLinux
Using Debian-3.0r2.ext3-mit-backports.1gb.bz2
Following GettingStartedLong off of Wiki site
Attempting to set up a bridged network connection
1) I'm a complete *nix noob - should I even be using
Debian-3.0r2.ext3-mit-backports.1gb.bz2 - or should I
be using Debian-20040605-mit.ext3.1610mb.bz2 ???
2) I'm getting "eth0: duplicate address detected!" all
over the place.
Attached you'll find my default.colinux.xml file. I've
left the TAP TCP/IP settings in Windows as DHCP. I've
tried putting in various MAC addresses in to no effect.
I am also getting "IPv6 over IPv4 tunneling driver". I
searched and found something on IPv6, but as a noob I
have no idea what was being said.
I can ping from coLinux to Windows and back. (coLinux
does get a LAN IP address) But I cannot SSH or VNC
into coLinux.
Help!!!!!!!!!!
default.colinux.xml
Logged In: YES
user_id=13380
I guess you have the win-pcap driver installed
(http://www.winpcap.org/install/default.htm) and 'Local Area
Connection' is actually the name of your external physical
network adapter. This has nothing to do with the TAP, so you
could remove (or ignore) it.
If this is the case, try the following line:
<network index='0' name='Local Area Connection'
type='bridged' mac='11:22:33:44:55:66' />
If you have a dhcp server in your network coLinux should get
an IP-Address, if you have the following lines in your
/etc/network/interfaces:
auto eth0
iface eth0 inet dhcp
What do you get, when you type in (as root) ifconfig?
Is your sshd running? (type "ps auxw | grep sshd")
If your sshd is running you could try to set a static IP in
/etc/network/interfaces:
auto eth0
iface eth0 inet static
address free IP-address in your external network
(e.g.:address 192.168.2.20)
netmask 255.255.255.0
gateway IP-Address of your router
In this case you should also edit /etc/resolv.conf and set a
nameserver manually: nameserver IP-Address of your nameserver.
Juergen