Best Simulation Software for Windows - Page 4
View:
Compare the Top Simulation Software for Windows as of May 2025 - Page 4
Sort By:
-
1
SIMHEAT
TRANSVALOR
Induction heat treatment simulation provides comprehensive information about temperature gradient from surface to core and also the location of areas where phase transformations occur. SIMHEAT® can monitor the impact of current frequency, coil geometry and even concentrators’ location within the heat affected zone. Material modelling considers electrical and magnetic properties that are temperature-dependent. SIMHEAT® can be used as a standalone solution or in combination with Transvalor software. The perfect interoperability guarantees seamless results transfer from one solution to another. All the capabilities and functionalities of SIMHEAT® are also integrated in our FORGE® software, dedicated to the simulation of hot, semi-hot and cold forming processes. -
2
Simcenter MAGNET
Siemens
Simcenter MAGNET is a powerful electromagnetic field simulation solution for performance prediction of motors, generators, sensors, transformers, actuators, solenoids, or any component with permanent magnets or coils. Simcenter MAGNET helps you predict the performance of any component with permanent magnets or coils. Perform low-frequency electromagnetic field simulations. Simcenter MAGNET includes capabilities to accurately model the physics of electromagnetic devices. This includes the ability to model manufacturing processes, temperature-dependent material properties, magnetization and de-magnetization modeling, and vector hysteresis models among others. Simcenter MAGNET also has a built-in motion solver with a six-degree-of-freedom capability. It allows for complex problems like magnetic levitation or complex motion to be accurately modeled and analyzed. This is made possible with a unique smart re-meshing technology. -
3
MuSES
ThermoAnalytics
Electro-optic and infrared renderings in MuSES achieve global benchmark accuracy through a stepwise workflow – beginning with heat sources such as engines, exhaust, bearings, and electronics, followed by an in-band diffuse radiosity solution. Then place your sensor at range and render multi-bounce, spectrally-summed radiance values, with DeltaT-RSS contrast metrics. Sensor response curve handy? Import it and see what you’ve been missing. With MuSES, you have reality at your fingertips. Because MuSES covers physics all the way back to heat sources and environmental loads, you can manage thermal signature contrast and evaluate control kits for low observable design in any global location. Heat shields, cooling schemes, and even camo surface treatments can be tested and evaluated for in-band radiance, replete with atmospheric attenuation along sensor line-of-sight. Triage and prioritize your engineering with MuSES early in the development cycle. -
4
CAESIM
Adaptive Research
Adaptive Research is pleased to announce the immediate release of the CAESIM 2024 simulation platform, providing advanced computational fluid dynamics modeling with multi-physics capabilities. The new software release provides new tools and capabilities that optimize the modeling process and provide the CFD engineer with fast simulation solutions.Starting Price: $1295/annual standard -
5
SIMULATE
RPMGlobal
SIMULATE is a purpose-built Discrete Event Simulation (DES) solution for Original Equipment Manufacturers (OEMs) to model complex, 3D mining environments using fully customizable, brand-specific mining equipment. SIMULATE is a platform used by OEMs globally to provide accurate, quantifiable, and productive equipment and service solutions for mining clients. Users of SIMULATE can showcase and articulate equipment value that is quantified and proven through simulated demonstrations. OEMs can leverage customer data to build a ‘digital twin’ of any mining operation, open pit or underground, to deliver an accurate representation of any mine site's haulage operations, actively demonstrating the value their equipment and services can provide. SIMULATE uses the most widely used haulage calculation engine in the mining industry, ensuring that you and your customers are on the same page. Increase profitability through improved operations. -
6
Aspen Plus
Aspen Technology
Advance circular economy initiatives and respond to global economic challenges, dynamic market conditions, and competitive pressures by improving performance, quality, and time-to-market with the best-in-class simulation software for chemicals, polymers, life science, and new sustainability processes. Aspen Plus is a market-leading process simulator built on over 40 years of experience, incorporating feedback from top chemical companies and an award-winning physical properties database. It provides integrated process modeling with economic, energy, safety, and emissions analysis to improve time-to-market, process efficiency, and sustainability performance. Aspen Plus advances the performance of chemical processes using best-in-class simulation software for bulk chemicals, specialty chemicals, and pharmaceutical industries. This powerful modeling technology enables optimization of throughput, product quality, and energy use in processes. -
7
SLB Symmetry
SLB
Symmetry process simulation software enables full life cycle modeling from conception to operation, providing better options to troubleshoot performance, create feed and startup studies, and fully optimize your system. It offers a comprehensive set of flare and relief system design tools, empowering users to verify the performance of entire safety systems. The platform is flexible enough to suit any application, analyzing standalone components or complete systems with various levels of detail, in steady state or dynamics. Symmetry provides a new approach to traditional oil pseudo-component characterization techniques. Its fluid characterization uses chemical family structures to enable accurate physical property estimation in blending, separation, and even reactive systems to be more accurately simulated, ensuring consistent thermodynamics and component tracking across the full system. The software also offers extensive options to provide openness. -
8
Frost 3D Universal
Simmakers
Frost 3D software allows you to develop scientific models of permafrost thermal regimes under the thermal influence of pipelines, production wells, hydraulic constructions, etc., taking into account the thermal stabilization of the ground. The software package is based on ten years experience in the field of programming, computational geometry, numerical methods, 3D visualization, and parallelization of computational algorithms. Creation of 3D computational domain with surface topography and soil lithology; 3D reconstruction of pipelines, boreholes, basements, and foundations of buildings; Import of 3D objects including Wavefront (OBJ), StereoLitho (STL), 3D Studio Max (3DS) and Frost 3D Objects (F3O); Library of thermophysical properties of the ground, building elements, climatic factors and the parameters of cooling units; Specification of thermal and hydrological properties of 3D objects and heat transfer parameters on the surfaces of objects. -
9
ISG-virtuos
ISG
An increasing number of variants with a tendency towards batch size 1, shorter product life cycles and high cost pressure: In the age of digitization, digital twins are indispensable in many areas. ISG Industrielle Steuerungstechnik GmbH has years of experience in the realization of simulation solutions with significant competitive advantages for customers in the field of mechanical and plant engineering. With the new generation ISG-virtuos 3 the simulation platform also becomes a solution for manufacturing automation and intralogistics. ISG-virtuos is an open, cross-company simulation platform, with which complete production systems including all components (controls, robots, material flow etc.) can be checked and optimized in deterministic real time. The simulations are created from virtual components, which - stored in corresponding libraries - can be reused and exchanged at any time. -
10
Creator
Presagis
Natively based on OpenFlight, the most widespread industry standard for 3D simulation models, Creator is the original software for creating optimized 3D models for use in your virtual environment. Designed specifically for simulation applications, Creator is the industry-standard software in the creation of optimized 3D models for real-time virtual environments. Content creators are constantly challenged to produce more models with higher detail, increased realism, and improved performance. Using a rich set of tools, content creators can build models from scratch, edit or import existing ones, and enhance objects for use in sensor-capable simulations. With full control of the modeling process, Creator allows you to quickly generate highly optimized and physically accurate 3D models with varying levels of detail. With complete interactive control of your models from database level to a single vertex attribute, Creator lets you develop models faster and with more control than ever. -
11
RT-LAB
OPAL-RT TECHNOLOGIES
RT-LAB is OPAL-RT’s real-time simulation software combining performance and enhanced user experience. Fully integrated with MATLAB/Simulink®, RT-LAB offers the most complex model-based design for interaction with real-world environments. It provides the flexibility and scalability to achieve the most complex real-time simulation applications in the automotive, aerospace, power electronics, and power systems industries. Since its first application nearly 20 years ago on the Canadian Space Agency’s Canada Arm, RT-LAB has revolutionized the world of systems engineering, whether in space, on the ground or at sea. RT-LAB enables engineers and scientists to accelerate the development of new prototypes and to meet the most rigorous testing required by new and innovative technologies. RT-LAB handles everything, including code generation, with an easy-to-use interface. With just a few clicks of the mouse, a Simulink® model becomes an interactive real-time simulation application. -
12
GASP
AeroSoft
GASP is a structured/unstructured, multi-block CFD flow solver which solves the Reynolds Averaged Navier-Stokes (RANS) equations as well as the heat conduction equation for solid bodies. Hierarchical-tree based organization. Pre- and post-processing in one interface. Solves steady and unsteady 3-D, Reynolds-Averaged, Navier-Stokes Equations (RANS) and subsets. Multi-block structured/unstructured grid topology. Unstructured mesh support for tetrahdra, hexahedra, prisms, and pyramids. Integration with portable extensible toolkit for scientific computation library. Uncoupling of systems including turbulence and chemistry for improved computational efficiency. Support for most parallel computers, including clusters. Integrated domain decomposition is transparent to the user. -
13
E-Hub NDI
Applied Computing & Engineering
e-hub NDI is the acronym of Engineering hub for Non-Destructive Inspection. The software is a flexible platform for a variety of manufacturing inspection needs. Design & Simulate in software, then generate the program for the robot controller. e-hub NDI is an offline simulation and programming software for robotic non-destructive testing. The sensor performing the inspection may or may not be in contact with the part to be inspected. -
14
CAESES
FRIENDSHIP SYSTEMS AG
CAESES® foundation is a powerful and flexible parametric 3D modeler. The main purpose: Robust variable geometry with fewer parameters. Create a clean and robust parametric geometry that is ideal for automated meshing and analysis. Integrate, launch and control your simulation runs. Let it be your flexible GUI for process automation incl. 3D post-processing. CAESES® offers integrated methods for automated design explorations and shape optimization. Optimize imported geometries by using the shape deformation and morphing techniques of CAESES. CAESES® is a command-driven platform that can be fully scripted and customized. Includes batch mode capabilities. Accelerate your shape optimization process by mapping the results of an adjoint flow analysis to the geometry parameters. Get your flexible CAESES model in just a few days! Customized to your needs and easy to use. No CAESES expertise required. -
15
Vertex Digital Twin Platform
Vertex Software LLC.
Vertex improves and enhances your current workflows and tools. Plug our visualization engine directly into your existing interface, applications, and systems. Vertex is easy to use and low cost to deploy and maintain. Unlock 3D product data from any size model, to any number of users, on any device. -
16
DIGIMU
TRANSVALOR
DIGIMU® generates digital polycrystalline microstructures representative of the material's heterogeneities (compliance with the topological characteristics of the microstructure). The boundary conditions applied to the REV are representative of that experienced by a material point at the macroscopic scale (thermomechanical cycle of the considered point). Based on a Finite Elements formulation, the various physical phenomena involved during metal forming processes are simulated (recrystallization, grain growth, Zener pinning due to second phase particles, etc.). In order to improve digital precision and to reduce computation times, the software is capable of providing a precise description of the interfaces (grain boundaries) while using an appropriate number of elements thanks to a fully automated anisotropic meshing and remeshing adaptation technology. -
17
COLDFORM
TRANSVALOR
The tools of cold forming undergo strong mechanical and tribological stresses during their life cycle. These can lead in certains cases of damaged premature tools. The tools represent an important part of the manufacturing cost of a part; thus it is essential to anticipate well these problems during the designs. COLDFORM® allows you to analyze mechanical die strength in order to extend their service life. The software can compute stress distribution within the die, along with deformations, wear, temperatures and damage at any time during the process. COLDFORM® can carry out rapid analyzes which consist in applying stresses obtained during the forming process computation, to the tools. Moreover, COLDFORM® is capable of performing coupled part/tool computations, giving extremely precise results. Thanks to the functionalities dedicated to pre-stressed dies, it is possible to accurately determine the value of the necessary pre-stressing of the interference fit of the tools. -
18
SIGMASOFT
SIGMA Engineering GmbH
The SIGMASOFT ® VIRTUAL MOLDING simulation software gives you a significant advantage in the injection and compression molding industry: - evaluate and optimize processes & complete molds - increase efficiency, productivity & part quality - reduce waste associated with trial & error -
19
DRAGSIM
RPMGlobal
Whether you compare before spending or compare before digging, DRAGSIM dragline simulation can help you find the right fit for your mine site. Mining engineers have trusted DRAGSIM for decades to make informed operational decisions, obtaining practical productivity and production cost data with speed and precision. DRAGSIM’s fully auditable functionality makes it a great fit for your company’s governance platform; you too can trust it to deliver accuracy and reliability from the pit to the boardroom. Vary parameters to analyze the impact of changes. Trusted dragline solution for over 40+ years. DRAGSIM is a dragline simulation system designed to optimize equipment productivity and waste movement to provide complete confidence in your decisions using the DRAGSIM decision support capability. By reproducing dragline methods across a range of operational parameters, and incorporating blasting, waste stripping, and other mining equipment into the analysis, -
20
ChemSep
ChemSep
ChemSep is a column simulator designed for distillation, absorption, and extraction operations, combining classic equilibrium stage and nonequilibrium (rate-based) models within an intuitive interface. The software includes a comprehensive library of capacity and mass transfer performance parameters for trays and packings, facilitating accurate modeling of actual column performance. ChemSep's design mode allows for automatic simulation and column diameter determination based on specified fractions of the flood, integrating vendor design methods and pressure drop models for trayed and packed columns. The program supports various column configurations and specifications, enabling users to solve separation problems efficiently. ChemSep operates as a standalone application or can be embedded within any CAPE-OPEN compliant flowsheeting package, utilizing their thermodynamic and physical property data. -
21
CADSIM Plus
Aurel Systems
CADSIM Plus is a chemical process simulation software that combines a first-principles dynamic simulator with a full-featured Computer Assisted Drawing (CAD) front-end in one package. It performs precise heat and material balances for any chemical process and can develop complex dynamic simulations with control logic and batch operations. The software includes a comprehensive set of generic process modules and offers optional module libraries for various applications. CADSIM Plus supports any level of drawing complexity, from simple block diagrams to detailed engineering drawings, and allows exporting drawings to AutoCAD and other standard CAD programs. Its 'electronic flowsheet' runtime simulation mode interface enables interactive and animated simulation tools, where users can change conditions while the simulated process is running. Applications of CADSIM Plus include process design, troubleshooting, prediction of future process conditions, and solutions to dynamic control. -
22
Pitch Visual OMT
Pitch Technologies
When you develop HLA federations, you need to have a Federation Object Model that describes the information exchange. Pitch Visual OMT is the leading tool for developing and maintaining such object models. You can use it to develop new FOMs for any domain or extend existing standardized FOMs such as the RPR FOM. Pitch Visual OMT gives you clear graphical views of your FOM. The built-in and helps ensuring correctness and consistency. If you need to migrate FOMs from older versions, or maintain a FOM that supports several HLA versions, Pitch Visual OMT has several conversion tools. During your projects life cycle you may also want to compare different versions of you FOMs using Pitch Visual OMT. The report features makes it easy to share your FOM with your team. -
23
Inventor Nastran
Autodesk
CAD-embedded finite element analysis software. Use a wider variety of study types and materials in your analysis. Inventor® Nastran® delivers finite element analysis (FEA) tools for engineers and analysts. Simulation covers multiple analysis types, such as linear and nonlinear stress, dynamics, and heat transfer. Inventor Nastran is available only in the Product Design & Manufacturing Collection. The Product Design & Manufacturing Collection delivers tools that work right inside Inventor—including advanced simulation, 5-axis CAM, and nesting, plus AutoCAD and Fusion 360. -
24
SALOME
OPEN CASCADE
SALOME is an open-source software that provides a generic Pre- and Post-Processing platform for numerical simulation. It can be used as a standalone application for generation of the CAD model, its preparation for the numerical calculations and post-processing of the calculation results or as a platform for integration of the external third-party numerical codes to produce a new application for the full life-cycle management of CAD models. SALOME, as any other complex software products, require deep knowledge in order to be most efficiently applied. OPEN CASCADE experts, that have been developing these platforms for years, possess such knowledge, and thus can efficiently support your development. -
25
SimulationX
ESI Group
Technical systems, like machines and manufacturing plants, are often very complex. They consist of a multitude of components and subsystems, usually based on diverse technical domains and increasingly fitted with sensors and controls. Their dynamic interactions have a significant impact on safety, performance, and comfort. With SimulationX, you have a single platform for modeling, simulating, and analyzing technical systems, including mechanics, hydraulics, pneumatics, electronics, and controls, as well as thermal, magnetic, and other physical behavior. Comprehensive component libraries with application-oriented model elements ensure you have the right tools available for your task.