Open Source Python Raspberry Pi Software

Combine a Raspberry Pi 3 B+ with the HQ Camera (12 Megapixel). Make astronomical Photos and Videos with the Camera.

GROWbox Supervisor System (GROWSS) is a grow box or grow cabinet environmental controller. GROWSS uses a Raspberry Pi (RPI) & Grove sensors to monitor and control the environment in your grow box or cabinet. Environmental factors such as temperature, humidity, soil moisture, & smoke (from fire) are monitored and displayed on a terminal connected to the RPI & on a mobile app. GROWSS also controls the exhaust fan and grow lights based on the time interval (ie. 12 hours on/12 hours off) & from environmental factors, temp & humidity. The environmental values are saved to the local storage every 15 minutes and when an alarm is present. Hi & low values are also saved. The LEDs on the case & the mobile application indicate if there is a high/low temp alarm, hi/low humidity alarm, soil moisture alarm, or smoke alarm. A speaker (buzzer) is activated on the case if there is a smoke alarm. 2 other LEDs indicate if either the exhaust fan is on or if the humidifier is on.

Python scripts for the Raspberry PI to control the graphic chip ST7735. The Display is the SainSmart 1.8 SPI LCD. tkDisplay2.zip contains a driver which simulates the SPI interface with alternative GPIO pins!

This is a python program for the RFID reader rc522. it uses the bcm2835 libary and the rpi-rc522 library. Tutorial found here: http://bit.ly/1hYx5ao