Publishing Node.js packages

You can publish Node.js packages to a registry as part of your continuous integration (CI) workflow.

В этой статье

Примечание.

GitHubразмещенные в данный момент средства выполнения не поддерживаются в GitHub Enterprise Server. Дополнительные сведения о планируемой поддержке в будущем см. в GitHub public roadmap.

Introduction

This guide shows you how to create a workflow that publishes Node.js packages to the GitHub Packages and npm registries after continuous integration (CI) tests pass.

Prerequisites

We recommend that you have a basic understanding of workflow configuration options and how to create a workflow file. For more information, see Writing workflows.

For more information about creating a CI workflow for your Node.js project, see Building and testing Node.js.

You may also find it helpful to have a basic understanding of the following:

About package configuration

The name and version fields in the package.json file create a unique identifier that registries use to link your package to a registry. You can add a summary for the package listing page by including a description field in the package.json file. For more information, see Creating a package.json file and Creating Node.js modules in the npm documentation.

When a local .npmrc file exists and has a registry value specified, the npm publish command uses the registry configured in the .npmrc file. Действие можно использовать setup-node для создания локального .npmrc файла в средстве выполнения, который настраивает реестр и область по умолчанию. Действие setup-node также принимает в качестве входных данных маркер проверки подлинности, используемый для доступа к частным реестрам или публикации пакетов узлов. Дополнительные сведения см. в разделе setup-node.

You can specify the Node.js version installed on the runner using the setup-node action.

If you add steps in your workflow to configure the publishConfig fields in your package.json file, you don't need to specify the registry-url using the setup-node action, but you will be limited to publishing the package to one registry. For more information, see publishConfig in the npm documentation.

Publishing packages to the npm registry

You can trigger a workflow to publish your package every time you publish a new release. The process in the following example is executed when the release event of type published is triggered. If the CI tests pass, the process uploads the package to the npm registry. For more information, see Управление выпусками в репозитории.

To perform authenticated operations against the npm registry in your workflow, you'll need to store your npm authentication token as a secret. For example, create a repository secret called NPM_TOKEN. For more information, see Using secrets in GitHub Actions.

By default, npm uses the name field of the package.json file to determine the name of your published package. When publishing to a global namespace, you only need to include the package name. For example, you would publish a package named my-package to https://www.npmjs.com/package/my-package.

If you're publishing a package that includes a scope prefix, include the scope in the name of your package.json file. For example, if your npm scope prefix is "octocat" and the package name is "hello-world", the name in your package.json file should be @octocat/hello-world. If your npm package uses a scope prefix and the package is public, you need to use the option npm publish --access public. This is an option that npm requires to prevent someone from publishing a private package unintentionally.

This example stores the NPM_TOKEN secret in the NODE_AUTH_TOKEN environment variable. When the setup-node action creates an .npmrc file, it references the token from the NODE_AUTH_TOKEN environment variable.

YAML
name: Publish Package to npmjs
on:
  release:
    types: [published]
jobs:
  build:
    runs-on: ubuntu-latest
    
    steps:
      - uses: actions/checkout@v4
      # Setup .npmrc file to publish to npm
      - uses: actions/setup-node@v4
        with:
          node-version: '20.x'
          registry-url: 'https://registry.npmjs.org'
      - run: npm ci
      - run: npm publish 
        env:
          NODE_AUTH_TOKEN: ${{ secrets.NPM_TOKEN }}

In the example above, the setup-node action creates an .npmrc file on the runner with the following contents:

//registry.npmjs.org/:_authToken=${NODE_AUTH_TOKEN}
registry=https://registry.npmjs.org/
always-auth=true

Please note that you need to set the registry-url to https://registry.npmjs.org/ in setup-node to properly configure your credentials.

Publishing packages to GitHub Packages

You can trigger a workflow to publish your package every time you publish a new release. The process in the following example is executed when the release event of type published is triggered. If the CI tests pass, the process uploads the package to GitHub Packages. For more information, see Управление выпусками в репозитории.

Configuring the destination repository

Linking your package to GitHub Packages using the repository key is optional. If you choose not to provide the repository key in your package.json file, then GitHub Packages publishes a package in the GitHub repository you specify in the name field of the package.json file. For example, a package named @my-org/test is published to the my-org/test GitHub repository. If the url specified in the repository key is invalid, your package may still be published however it won't be linked to the repository source as intended.

If you do provide the repository key in your package.json file, then the repository in that key is used as the destination npm registry for GitHub Packages. For example, publishing the below package.json results in a package named my-package published to the octocat/my-other-repo GitHub repository. Once published, only the repository source is updated, and the package doesn't inherit any permissions from the destination repository.

{
  "name": "@octocat/my-package",
  "repository": {
    "type": "git",
    "url": "https://github.com/octocat/my-other-repo.git"
  },

Authenticating to the destination repository

To perform authenticated operations against the GitHub Packages registry in your workflow, you can use the GITHUB_TOKEN. Секрет GITHUB_TOKEN устанавливается в качестве маркера доступа для репозитория при каждом запуске задания в рабочем процессе. Необходимо задать разрешения для этого маркера доступа в файле рабочего процесса, чтобы предоставить доступ для чтения для contents разрешения и доступа на запись для packages разрешения. Дополнительные сведения см. в разделе Automatic token authentication.

If you want to publish your package to a different repository, you must use a personal access token (classic) that has permission to write to packages in the destination repository. For more information, see Управление личными маркерами доступа and Using secrets in GitHub Actions.

Example workflow

This example stores the GITHUB_TOKEN secret in the NODE_AUTH_TOKEN environment variable. When the setup-node action creates an .npmrc file, it references the token from the NODE_AUTH_TOKEN environment variable.

YAML
name: Publish package to GitHub Packages
on:
  release:
    types: [published]
jobs:
  build:
    runs-on: ubuntu-latest
    permissions:
      contents: read
      packages: write
    steps:
      - uses: actions/checkout@v4
      # Setup .npmrc file to publish to GitHub Packages
      - uses: actions/setup-node@v4
        with:
          node-version: '20.x'
          registry-url: 'https://npm.pkg.github.com'
          # Defaults to the user or organization that owns the workflow file
          scope: '@octocat'
      - run: npm ci
      - run: npm publish
        env:
          NODE_AUTH_TOKEN: ${{ secrets.GITHUB_TOKEN }}

The setup-node action creates an .npmrc file on the runner. When you use the scope input to the setup-node action, the .npmrc file includes the scope prefix. By default, the setup-node action sets the scope in the .npmrc file to the account that contains that workflow file.

//npm.pkg.github.com/:_authToken=${NODE_AUTH_TOKEN}
@octocat:registry=https://npm.pkg.github.com
always-auth=true

Publishing packages using Yarn

If you use the Yarn package manager, you can install and publish packages using Yarn.

YAML
name: Publish Package to npmjs
on:
  release:
    types: [published]
jobs:
  build:
    runs-on: ubuntu-latest
    steps:
      - uses: actions/checkout@v4
      # Setup .npmrc file to publish to npm
      - uses: actions/setup-node@v4
        with:
          node-version: '20.x'
          registry-url: 'https://registry.npmjs.org'
          # Defaults to the user or organization that owns the workflow file
          scope: '@octocat'
      - run: yarn
      - run: yarn npm publish // for Yarn version 1, use `yarn publish` instead
        env:
          NODE_AUTH_TOKEN: ${{ secrets.NPM_TOKEN }}

To authenticate with the registry during publishing, ensure your authentication token is also defined in your yarnrc.yml file. For more information, see the Settings article in the Yarn documentation.