Add DISPLAY_TYPE_NONE and SERIAL_MODE_NONE

Explicitly show how to disable display output or serial output.

Author: thomasjfox

Arduino_Pedelec_Controller/config.h

@@ -10,17 +10,19 @@
 
 #define HARDWARE_REV 3      //place your hardware revision (1-3) here: x means hardware-revision 1.x
 
-#define DISPLAY_TYPE_NOKIA_5PIN (1<<0)       //Nokia 5110 5 pin mode
-#define DISPLAY_TYPE_NOKIA_4PIN (1<<1)       //Nokia 5110 4 pin mode (SCE pin tied to GND)
+#define DISPLAY_TYPE_NONE (1<<0)             //no display at all
+#define DISPLAY_TYPE_NOKIA_5PIN (1<<1)       //Nokia 5110 5 pin mode
+#define DISPLAY_TYPE_NOKIA_4PIN (1<<2)       //Nokia 5110 4 pin mode (SCE pin tied to GND)
 #define DISPLAY_TYPE_NOKIA (DISPLAY_TYPE_NOKIA_5PIN|DISPLAY_TYPE_NOKIA_4PIN)
-#define DISPLAY_TYPE_16X2_LCD_4BIT (1<<2)    //16x2 LCD 4bit-mode
-#define DISPLAY_TYPE_J_LCD (1<<3)            //King-Meter J-LCD
+#define DISPLAY_TYPE_16X2_LCD_4BIT (1<<3)    //16x2 LCD 4bit-mode
+#define DISPLAY_TYPE_J_LCD (1<<4)            //King-Meter J-LCD
 #define DISPLAY_TYPE DISPLAY_TYPE_NOKIA_5PIN //Set your display type here. CHANGES ONLY HERE!<-----------------------------
 
-#define SERIAL_MODE_DEBUG (1<<0)             //send debug data over Serial Monitor
-#define SERIAL_MODE_ANDROID (1<<1)           //send Amarino-compatible data over serial/bluetooth
-#define SERIAL_MODE_MMC (1<<2)               //send MMC-App compatible data over serial/bluetooth (for future use, not implemented yet)
-#define SERIAL_MODE_LOGVIEW (1<<3)          //send logview-compatible data over serial (for future use, not implemented yet)
+#define SERIAL_MODE_NONE (1<<0)              //don't send serial data at all
+#define SERIAL_MODE_DEBUG (1<<1)             //send debug data over Serial Monitor
+#define SERIAL_MODE_ANDROID (1<<2)           //send Amarino-compatible data over serial/bluetooth
+#define SERIAL_MODE_MMC (1<<3)               //send MMC-App compatible data over serial/bluetooth (for future use, not implemented yet)
+#define SERIAL_MODE_LOGVIEW (1<<4)           //send logview-compatible data over serial (for future use, not implemented yet)
 #define SERIAL_MODE SERIAL_MODE_DEBUG        //Set your serial mode here. CHANGES ONLY HERE!<-----------------------------