Add neso buildroot config files

Author: rohit-numato

FPGA/neso/nesoLinux-BSP/neso_defconfig

@@ -0,0 +1,71 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_INITRAMFS_COMPRESSION_GZIP=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EXPERT=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_HOTPLUG is not set
+# CONFIG_BASE_FULL is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_SHMEM is not set
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_OPT_LIB_ASM is not set
+CONFIG_KERNEL_BASE_ADDR=0x80000000
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_XILINX_MICROBLAZE0_FAMILY="artix7"
+CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
+CONFIG_XILINX_MICROBLAZE0_USE_DIV=1
+CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1
+CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1
+CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=2
+CONFIG_XILINX_MICROBLAZE0_HW_VER="9.5"
+CONFIG_HZ_100=y
+CONFIG_MMU=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttyUL0"
+CONFIG_CMDLINE_FORCE=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+CONFIG_PROC_DEVICETREE=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_XILINX_EMACLITE=y
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_UARTLITE=y
+CONFIG_SERIAL_UARTLITE_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EXT2_FS=y
+# CONFIG_DNOTIFY is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_CIFS=y
+CONFIG_CIFS_STATS=y
+CONFIG_CIFS_STATS2=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEBUG_SLAB=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_INFO=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set

FPGA/neso/nesoLinux-BSP/numato_neso_defconfig

@@ -0,0 +1,26 @@
+BR2_microblaze=y
+BR2_microblazeel=y
+BR2_TARGET_GENERIC_GETTY_PORT="ttyUL0"
+BR2_TARGET_GENERIC_GETTY_BAUDRATE_115200=y
+BR2_TARGET_GENERIC_GETTY_BAUDRATE="115200"
+BR2_TARGET_GENERIC_GETTY_TERM="vt100"
+BR2_TARGET_GENERIC_GETTY_OPTIONS=""
+# BR2_TARGET_ROOTFS_TAR is not set
+BR2_TARGET_ROOTFS_INITRAMFS=y
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
+BR2_TARGET_ENABLE_ROOT_LOGIN=y
+BR2_TARGET_GENERIC_PASSWD_MD5=y
+BR2_TARGET_GENERIC_PASSWD_METHOD="md5"
+BR2_INIT_BUSYBOX=y
+BR2_TARGET_TZ_INFO=y
+BR2_TARGET_TZ_ZONELIST="default"
+BR2_TARGET_LOCALTIME="Asia/Kolkata"
+BR2_TARGET_GENERIC_ROOT_PASSWD="neso"
+BR2_SYSTEM_BIN_SH_BUSYBOX=y
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/numato/neso/neso_defconfig"
+BR2_LINUX_KERNEL_USE_CUSTOM_DTS=y
+BR2_LINUX_KERNEL_CUSTOM_DTS_PATH="board/numato/neso/nesoartix7.dts"
+
+BR2_TARGET_GENERIC_HOSTNAME="NumatoLab-Neso"
+BR2_TARGET_GENERIC_ISSUE="Welcome to Microblaze + Linux on Artix7 FPGA"