overlays: i2c-sensor: Add veml6035/7700/3235

Add more Vishay ambient light sensors.

Signed-off-by: Phil Elwell <[email protected]>

Author: pelwell

arch/arm/boot/dts/overlays/README

@@ -2512,8 +2512,8 @@ Params: addr                    Set the address for the ADS7828, ADS7830,
                                 ti,shunt-gain for configuration
 
         int_pin                 Set the GPIO to use for interrupts (as73211,
-                                as7331, hdc3020, hts221, max30102, mpu6050 and
-                                mpu9250 only)
+                                as7331, hdc3020, hts221, max30102, mpu6050,
+                                mpu9250, veml6030, veml6035 only)
 
         jc42                    Select any of the many JEDEC JC42.4-compliant
                                 temperature sensors, including:
@@ -2606,8 +2606,14 @@ Params: addr                    Set the address for the ADS7828, ADS7830,
         tsl4531                 Select the AMS TSL4531 digital ambient light
                                 sensor
 
+        veml3235                Select the Vishay VEML3235 ambient light sensor
+
         veml6030                Select the Vishay VEML6030 ambient light sensor
 
+        veml6035                Select the Vishay VEML6035 ambient light sensor
+
+        veml7700                Select the Vishay VEML7700 ambient light sensor
+
         veml6040                Select the Vishay VEML6040 RGBW light sensor
 
         veml6070                Select the Vishay VEML6070 ultraviolet light

arch/arm/boot/dts/overlays/i2c-sensor-common.dtsi

@@ -789,6 +789,52 @@
 		};
 	};
 
+	fragment@51 {
+		target = <&i2cbus>;
+		__dormant__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+
+			veml6035: veml6035@29 {
+				compatible = "vishay,veml6035";
+				reg = <0x29>;
+				interrupt-parent = <&gpio>;
+				interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+				pinctrl-0 = <&int_pins>;
+				pinctrl-names = "default";
+			};
+		};
+	};
+
+	fragment@52 {
+		target = <&i2cbus>;
+		__dormant__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+
+			veml7700: veml7700@10 {
+				compatible = "vishay,veml7700";
+				reg = <0x10>;
+			};
+		};
+	};
+
+	fragment@53 {
+		target = <&i2cbus>;
+		__dormant__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+
+			veml3235: veml3235@10 {
+				compatible = "vishay,veml3025";
+				reg = <0x10>;
+			};
+		};
+	};
+
 	fragment@99 {
 		target = <&gpio>;
 		__dormant__ {
@@ -852,6 +898,9 @@
 		adxl355 = <0>,"+48";
 		bmp58x = <0>,"+49";
 		veml6030 = <0>,"+50+99";
+		veml6035 = <0>,"+51+99";
+		veml7700 = <0>,"+52";
+		veml3235 = <0>,"+53";
 
 		addr =	<&bme280>,"reg:0", <&bmp280>,"reg:0", <&tmp102>,"reg:0",
 			<&lm75>,"reg:0", <&hdc100x>,"reg:0", <&sht3x>,"reg:0",
@@ -878,7 +927,8 @@
 			<&as7331>, "interrupts:0",
 			<&adxl345>, "interrupts:0",
 			<&tcs3472>, "interrupts:0",
-			<&veml6030>, "interrupts:0";
+			<&veml6030>, "interrupts:0",
+			<&veml6035>, "interrupts:0";
 		label = <&ads7828>, "label",
 			<&ads7830>, "label";
 		no_timeout = <&jc42>, "smbus-timeout-disable?";