Samba setting for PI

Author: yenho

smb.conf

@@ -0,0 +1,356 @@
+#
+# Sample configuration file for the Samba suite for Debian GNU/Linux.
+#
+#
+# This is the main Samba configuration file. You should read the
+# smb.conf(5) manual page in order to understand the options listed
+# here. Samba has a huge number of configurable options most of which 
+# are not shown in this example
+#
+# Some options that are often worth tuning have been included as
+# commented-out examples in this file.
+#  - When such options are commented with ";", the proposed setting
+#    differs from the default Samba behaviour
+#  - When commented with "#", the proposed setting is the default
+#    behaviour of Samba but the option is considered important
+#    enough to be mentioned here
+#
+# NOTE: Whenever you modify this file you should run the command
+# "testparm" to check that you have not made any basic syntactic 
+# errors. 
+# A well-established practice is to name the original file
+# "smb.conf.master" and create the "real" config file with
+# testparm -s smb.conf.master >smb.conf
+# This minimizes the size of the really used smb.conf file
+# which, according to the Samba Team, impacts performance
+# However, use this with caution if your smb.conf file contains nested
+# "include" statements. See Debian bug #483187 for a case
+# where using a master file is not a good idea.
+#
+
+#======================= Global Settings =======================
+
+[global]
+
+## Browsing/Identification ###
+
+# Change this to the workgroup/NT-domain name your Samba server will part of
+   workgroup = WORKGROUP
+
+# server string is the equivalent of the NT Description field
+   server string = %h server
+
+# Windows Internet Name Serving Support Section:
+# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
+#   wins support = no
+
+# WINS Server - Tells the NMBD components of Samba to be a WINS Client
+# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
+;   wins server = w.x.y.z
+
+# This will prevent nmbd to search for NetBIOS names through DNS.
+   dns proxy = no
+
+# What naming service and in what order should we use to resolve host names
+# to IP addresses
+;   name resolve order = lmhosts host wins bcast
+
+#### Networking ####
+
+# The specific set of interfaces / networks to bind to
+# This can be either the interface name or an IP address/netmask;
+# interface names are normally preferred
+;   interfaces = 127.0.0.0/8 eth0
+
+# Only bind to the named interfaces and/or networks; you must use the
+# 'interfaces' option above to use this.
+# It is recommended that you enable this feature if your Samba machine is
+# not protected by a firewall or is a firewall itself.  However, this
+# option cannot handle dynamic or non-broadcast interfaces correctly.
+;   bind interfaces only = yes
+
+
+
+#### Debugging/Accounting ####
+
+# This tells Samba to use a separate log file for each machine
+# that connects
+   log file = /var/log/samba/log.%m
+
+# Cap the size of the individual log files (in KiB).
+   max log size = 1000
+
+# If you want Samba to only log through syslog then set the following
+# parameter to 'yes'.
+#   syslog only = no
+
+# We want Samba to log a minimum amount of information to syslog. Everything
+# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
+# through syslog you should set the following parameter to something higher.
+   syslog = 0
+
+# Do something sensible when Samba crashes: mail the admin a backtrace
+   panic action = /usr/share/samba/panic-action %d
+
+
+####### Authentication #######
+
+# "security = user" is always a good idea. This will require a Unix account
+# in this server for every user accessing the server. See
+# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
+# in the samba-doc package for details.
+#   security = user
+
+# You may wish to use password encryption.  See the section on
+# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
+   encrypt passwords = true
+
+# If you are using encrypted passwords, Samba will need to know what
+# password database type you are using.  
+   passdb backend = tdbsam
+
+   obey pam restrictions = yes
+
+# This boolean parameter controls whether Samba attempts to sync the Unix
+# password with the SMB password when the encrypted SMB password in the
+# passdb is changed.
+   unix password sync = yes
+
+# For Unix password sync to work on a Debian GNU/Linux system, the following
+# parameters must be set (thanks to Ian Kahan <<[email protected]> for
+# sending the correct chat script for the passwd program in Debian Sarge).
+   passwd program = /usr/bin/passwd %u
+   passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
+
+# This boolean controls whether PAM will be used for password changes
+# when requested by an SMB client instead of the program listed in
+# 'passwd program'. The default is 'no'.
+   pam password change = yes
+
+# This option controls how unsuccessful authentication attempts are mapped
+# to anonymous connections
+   map to guest = bad user
+
+########## Domains ###########
+
+# Is this machine able to authenticate users. Both PDC and BDC
+# must have this setting enabled. If you are the BDC you must
+# change the 'domain master' setting to no
+#
+;   domain logons = yes
+#
+# The following setting only takes effect if 'domain logons' is set
+# It specifies the location of the user's profile directory
+# from the client point of view)
+# The following required a [profiles] share to be setup on the
+# samba server (see below)
+;   logon path = \\%N\profiles\%U
+# Another common choice is storing the profile in the user's home directory
+# (this is Samba's default)
+#   logon path = \\%N\%U\profile
+
+# The following setting only takes effect if 'domain logons' is set
+# It specifies the location of a user's home directory (from the client
+# point of view)
+;   logon drive = H:
+#   logon home = \\%N\%U
+
+# The following setting only takes effect if 'domain logons' is set
+# It specifies the script to run during logon. The script must be stored
+# in the [netlogon] share
+# NOTE: Must be store in 'DOS' file format convention
+;   logon script = logon.cmd
+
+# This allows Unix users to be created on the domain controller via the SAMR
+# RPC pipe.  The example command creates a user account with a disabled Unix
+# password; please adapt to your needs
+; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u
+
+# This allows machine accounts to be created on the domain controller via the 
+# SAMR RPC pipe.  
+# The following assumes a "machines" group exists on the system
+; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u
+
+# This allows Unix groups to be created on the domain controller via the SAMR
+# RPC pipe.  
+; add group script = /usr/sbin/addgroup --force-badname %g
+
+########## Printing ##########
+
+# If you want to automatically load your printer list rather
+# than setting them up individually then you'll need this
+#   load printers = yes
+
+# lpr(ng) printing. You may wish to override the location of the
+# printcap file
+;   printing = bsd
+;   printcap name = /etc/printcap
+
+# CUPS printing.  See also the cupsaddsmb(8) manpage in the
+# cupsys-client package.
+;   printing = cups
+;   printcap name = cups
+
+############ Misc ############
+
+# Using the following line enables you to customise your configuration
+# on a per machine basis. The %m gets replaced with the netbios name
+# of the machine that is connecting
+;   include = /home/samba/etc/smb.conf.%m
+
+# Most people will find that this option gives better performance.
+# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
+# for details
+# You may want to add the following on a Linux system:
+#         SO_RCVBUF=8192 SO_SNDBUF=8192
+#   socket options = TCP_NODELAY
+
+# The following parameter is useful only if you have the linpopup package
+# installed. The samba maintainer and the linpopup maintainer are
+# working to ease installation and configuration of linpopup and samba.
+;   message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &
+
+# Domain Master specifies Samba to be the Domain Master Browser. If this
+# machine will be configured as a BDC (a secondary logon server), you
+# must set this to 'no'; otherwise, the default behavior is recommended.
+#   domain master = auto
+
+# Some defaults for winbind (make sure you're not using the ranges
+# for something else.)
+;   idmap uid = 10000-20000
+;   idmap gid = 10000-20000
+;   template shell = /bin/bash
+
+# The following was the default behaviour in sarge,
+# but samba upstream reverted the default because it might induce
+# performance issues in large organizations.
+# See Debian bug #368251 for some of the consequences of *not*
+# having this setting and smb.conf(5) for details.
+;   winbind enum groups = yes
+;   winbind enum users = yes
+
+# Setup usershare options to enable non-root users to share folders
+# with the net usershare command.
+
+# Maximum number of usershare. 0 (default) means that usershare is disabled.
+;   usershare max shares = 100
+
+# Allow users who've been granted usershare privileges to create
+# public shares, not just authenticated ones
+   usershare allow guests = yes
+
+#======================= Share Definitions =======================
+
+[homes]
+   comment = Home Directories
+   browseable = no
+
+# By default, the home directories are exported read-only. Change the
+# next parameter to 'no' if you want to be able to write to them.
+   read only = yes
+
+# File creation mask is set to 0700 for security reasons. If you want to
+# create files with group=rw permissions, set next parameter to 0775.
+   create mask = 0700
+
+# Directory creation mask is set to 0700 for security reasons. If you want to
+# create dirs. with group=rw permissions, set next parameter to 0775.
+   directory mask = 0700
+
+# By default, \\server\username shares can be connected to by anyone
+# with access to the samba server.
+# The following parameter makes sure that only "username" can connect
+# to \\server\username
+# This might need tweaking when using external authentication schemes
+   valid users = %S
+
+# Un-comment the following and create the netlogon directory for Domain Logons
+# (you need to configure Samba to act as a domain controller too.)
+;[netlogon]
+;   comment = Network Logon Service
+;   path = /home/samba/netlogon
+;   guest ok = yes
+;   read only = yes
+
+# Un-comment the following and create the profiles directory to store
+# users profiles (see the "logon path" option above)
+# (you need to configure Samba to act as a domain controller too.)
+# The path below should be writable by all users so that their
+# profile directory may be created the first time they log on
+;[profiles]
+;   comment = Users profiles
+;   path = /home/samba/profiles
+;   guest ok = no
+;   browseable = no
+;   create mask = 0600
+;   directory mask = 0700
+
+[printers]
+   comment = All Printers
+   browseable = no
+   path = /var/spool/samba
+   printable = yes
+   guest ok = no
+   read only = yes
+   create mask = 0700
+
+# Windows clients look for this share name as a source of downloadable
+# printer drivers
+[print$]
+   comment = Printer Drivers
+   path = /var/lib/samba/printers
+   browseable = yes
+   read only = yes
+   guest ok = no
+# Uncomment to allow remote administration of Windows print drivers.
+# You may need to replace 'lpadmin' with the name of the group your
+# admin users are members of.
+# Please note that you also need to set appropriate Unix permissions
+# to the drivers directory for these users to have write rights in it
+;   write list = root, @lpadmin
+
+# A sample share for sharing your CD-ROM with others.
+;[cdrom]
+;   comment = Samba server's CD-ROM
+;   read only = yes
+;   locking = no
+;   path = /cdrom
+;   guest ok = yes
+
+# The next two parameters show how to auto-mount a CD-ROM when the
+#	cdrom share is accesed. For this to work /etc/fstab must contain
+#	an entry like this:
+#
+#       /dev/scd0   /cdrom  iso9660 defaults,noauto,ro,user   0 0
+#
+# The CD-ROM gets unmounted automatically after the connection to the
+#
+# If you don't want to use auto-mounting/unmounting make sure the CD
+#	is mounted on /cdrom
+#
+;   preexec = /bin/mount /cdrom
+;   postexec = /bin/umount /cdrom
+
+[myshare]
+comment = MyRaspPi
+read only = no
+locking = no
+path = /home/public
+guest ok = yes
+force user = pi
+writeable = yes
+only guest = yes
+create mask = 0777
+directory mask = 0777
+
+[music]
+comment = MPD music
+read only = no
+locking = no
+path = /var/lib/mpd/music
+guest ok = yes
+force user = pi
+writeable = yes
+only guest = yes
+create mask = 0777
+directory mask = 0777