Open Source Network Configuration Tools - Page 2

KDE Network Configuration. Allow to change IP address, DNS, profile management. It provides a framework with 2 layers. The first layer collects information about interfaces/traffic and emits signals for upper layers. The second layer is a set of widg

Kifupdown is a KDE/Java (Koala) frontend to the 'ifupdown' commands. It lives in the systray and is designed to be unobtrusive and work seamlessly with your existing network configuration.

NetConf - OpenBSD network configuration utility

Netcfg is a gnome-based replacement for Redhat's old "netcfg" utility. This gnome-based version also includes the ability to manage multiple network profiles for roaming users, and support for wireless interfaces.

Network Configuration Store is a free, open source application for network administrators, designed to automatically backup, revision and audit the configuration from Cisco IOS-based routers and switches.

Now the project is just a ppp-manager, as NetworkManager takes care about wired and wireless, but not about PPPoE, PPTP, GPRS including bluetooth. I hope someday the project will die when NM will take care about all this stuff.

The Network Diagnostic Tool (NDT) is a client/server program that provides network configuration and performance testing to a users desktop or laptop computer. Multi-level results allow novice and expert users to view and understand the test results.

Networkprofiler is a software for management of various network configuration profiles. Its goal is to do the switching process between different network environments simple and fast.

Crée pour tout faire se systéme et multifonction: Jeux, Travail et divertisement

Python project for make easier to change your laptop network configuration depending on the diferent places you use it.

SysDetail V1.1 SysDetail is capable of getting basic information about BIOS, Proxy Configuration , Network , Mother Board Details and Disk Information. with PDF Export function Basic Detail Types : System Information Bios Information Motherboard information Disk Drives Display Information Network Configuration Proxy Configuration

"Sysmy" is a simple System information program for Linux. It displays different details over the avaiable hardware and network configuration. The programm was written with C++ and runs under a console -> bash !

syssumm (AKA "System Summaries") is a collaborative open source project developing a set of Perl scripts that generate a profile of a computer's hardware, software, and network configuration that can then be viewed with a browser.

This projet is aimed to provide a full replacement for asus "CloseLid". Why : - Close lid lack some function (ex: tent mode) - Close lid is cpu-hungry => make my fan spin. How : - a c# windows service app - a desktop app - a metro front-end app Functionalities : - switch screen configuration - auto-swith mode (close lid detection) - enable/disable the touch screen - pen-compliant - icon tray - settings On the road: - solution for brightness level for tablet screen (i think it's the part that suck also in the asus utility, ie active check) - installer 3-7-2013 source! i moved switch mecanism from destktop app to servce app, add configuration and a better handle of sleep recover. But not enought finished to be release (some configuration are not stored, need network configuration tested) tags: taichi screen switch close lid touch panel tablet lap

Our goal is to develop the unix network configuration simulator. The program will provide a fully configurable environment to configure virtual networks, network interfaces and routing tables. The user will be then able to watch the packets flying on.

VeriNeC (Verified Network Configuration) is a network configuration management application. It allows to import configuration, simulate and verify the network and distribute configuration to devices.

NEW: 1.0rc1 Released! Coming in 1.1 - Automated configuration of ICS - Bridge mode configuration that allows for extending an existing wireless network - Configuration GUI (maybe) This configuration tool and simple windows service aide in turning any Windows 7/8 system into a persistent WiFi hotspot. in 1.0, you must still manually configure ICS (see the readme file included in the install for detailed instruction on doing so) Requirements: - A windows 7 or 8 system with a connection to the internet (cabled or WiFi) - A wireless adapter (can use the same adapter that is connected to the internet, works with USB WiFi cards as well) - .Net Framework 4.0 - http://www.microsoft.com/en-us/download/details.aspx?id=17851

czxNetSwitch allows users to create different profiles for their network configuration and easily switch between them.

To diagnose a problem or simply to study the internal flow of information in an ethercat fieldbus, one of the common practices is to capture the flow of ethercat datagrams with an ethernet sniffer such as Wireshark (www.wireshark.org). Wireshark provides some filters to facilitate data analysis but the high amount of recorded information still makes an analysis complicated for many people who do not have a very deep knowledge of the ethercat protocol and Wireshark tools. Ecang can help these people! Ecang extracts the list of the slaves managed and the PDOs exchanged in an ethercat network directly from the network configuration file (ENI file) .xml, thanks to this data it can read numerous information from the file generated by the sniffer (.pcapng) and transfers them to a comma-separated values ​​file (.csv) already applying a first level of validation.

ethflop is a DOS TSR that emulates a floppy disk drive. Such virtual floppy disk is, in fact, stored on a Linux server as a classic floppy image. All the communication between ethflop (the TSR) and ethflopd (the Linux daemon) is based on raw Ethernet. No need for any network configuration - the DOS PC only needs to have some kind of Ethernet adapter (physical or emulated, for example through PLIP) and a suitable packet driver.

Using the iOS SDK for FreeRTOS Bluetooth Devices, you can create mobile applications that do the following. Scan for and connect to nearby BLE devices running FreeRTOS. Provision Wi-Fi networks for a BLE device running FreeRTOS. Act as a proxy for transmitting MQTT messages between a device running FreeRTOS and the AWS IoT cloud.

The project was written by Raj Uppal for downloading network configuration from Cisco (Juniper support will be added later) routers and switches. Also will allow for performing automated network management based on the configurations downloaded.

This application is set to be used as an extension for GNS3 to automatically generate the configuration of all Cisco (and ALU in the future) network equipments that are part of a virtual topology. We take advantage of the topology setup configuration files produced by GNS3 to automatically generate the nodes (e.g. routers and switches) configuration files, without the need to access their corresponding consoles. Our implementation is also able to include customized settings, like the routing protocol to be used and which baseline configuration should be applied. This extension for GNS3 allows beginner practitioners to produce valid configuration files that can be further analysed, replicated and even applied to real network equipments. For more experienced students or practitioners this extension allows to speedup the overall network configuration task in large and complex network topologies, since they may overtake some initial and repetitive IP configuration steps.

Routercli is a Cisco-like shell for diskless or one-floppy Linux mini-distributions. It includes network configuration and manipulation, rip daemon, standard acls and other utilities. It is a replacement for a shell on diskless or onefloppy linux.