AUSTIN-HEALEY SPRITE abs sensor
Where to buy AUSTIN-HEALEY SPRITE abs sensor at a good price? At AUTODOC!
AUTODOC Bestsellers: buy online at a good price to reduce AUSTIN-HEALEY SPRITE abs sensor replacement costs
The best selling ABS sensor replacement parts AUSTIN-HEALEY SPRITE are available for your in original quality from our ABS wheel speed sensor catagory.
FEBI BILSTEIN 100751 ABS sensor ring
Front Axle Left, Front Axle Right
Sold by AUTODOC
JAPANPARTS ABS-141 ABS sensor
Rear Axle Left
Sold by AUTODOC
AIC 55413 ABS sensor ring
Magnetic, Front Axle Left, Front Axle Right
Sold by AUTODOC
BOSCH DF 11 ABS sensor
with cable, Hall Sensor, 891mm
Sold by AUTODOC
BOSCH DF 11 ABS sensor
without cable, Hall Sensor, 70mm
Sold by AUTODOC
JAPANPARTS ABS-149 ABS sensor
Rear Axle Right
Sold by AUTODOC
ATE 360192 ABS sensor
954mm
Sold by AUTODOC
AIC 57314 ABS sensor ring
Number of Teeth: 48, Rear Axle both sides
Sold by AUTODOC
BOSCH DF 11 ABS sensor
with cable, Hall Sensor, 751mm
Sold by AUTODOC
BOSCH DF 11 ABS sensor
with cable, Hall Sensor, 723mm
Sold by AUTODOC
VEMO 1011914 ABS sensor ring
Front Axle, Original VEMO Quality
Sold by AUTODOC
AIC 52302 ABS sensor ring
Magnetic, Rear Axle both sides
Sold by AUTODOC
BOSCH WS526 ABS sensor
without cable, Active sensor, 75mm
Sold by AUTODOC
METZGER 0900764 ABS sensor ring
Rear Axle Left, Rear Axle Right
Sold by AUTODOC
ABE CCZ1382ABE ABS sensor
Front axle both sides
Sold by AUTODOC
FEBI BILSTEIN 177539 ABS sensor ring
Rear Axle Left, Rear Axle Right
Sold by AUTODOC
VEMO 1077429 ABS sensor for AUSTIN-HEALEY SPRITE
Rear Axle both sides, Original VEMO Quality
Sold by AUTODOC
ABE CCZ1383ABE ABS sensor for AUSTIN-HEALEY SPRITE
Front axle both sides
Sold by AUTODOC
BOSCH DF11 ABS sensor for AUSTIN-HEALEY SPRITE
Sold by AUTODOC
ATE 360390 ABS sensor for AUSTIN-HEALEY SPRITE
without cable
Sold by AUTODOC
Sensor ABS for Top AUSTIN-HEALEY SPRITE Models
AUTODOC tips and tricks to AUSTIN-HEALEY SPRITE Wheel speed sensor
Wheel speed sensor Austin-Healey SPRITE: which brand is better?
According to our customers, the best spare parts in the product category Sensor ABS Austin-Healey SPRITE come from the following brands:
ABS wheel speed sensor Austin-Healey SPRITE: how much does this product cost?
The price of car parts within the category ABS sensor AUSTIN-HEALEY SPRITE ranges from £6.00 to £44.00, depending on the manufacturer and product specifications.
faq
DIY repair is only possible if the ABS malfunction is caused by faulty wheel speed sensors. Due to their location, they are highly exposed to moisture and dirt and therefore often fail. In some cases, it is enough to clean the sensitive element with a dry soft lint-free cloth. If this doesn’t work, replace the component.
If a malfunction of the anti-lock braking system is caused by a failure of the electronic control unit or a hydraulic unit, you will need professional assistance. Visit a car repair shop.
First, inspect the component. Cracks on its housing, torn and oxidised wires, and a damaged connector indicate a malfunction.
Use a multimeter for thorough diagnostics. Before you start testing the component, check how the wheel speed sensors are installed in your car. You can find this information in the vehicle repair manual.
You will need to raise the car and most likely to remove the wheel in order to access the part. Next, disconnect the wire from the ABS control unit. Connect the multimeter probes to the sensor contacts and measure resistance. Compare the received values with nominal data – they are usually specified in the car owner’s manual. As a rule, these values vary within the range of 0,5–2,0 kiloohms.
The next step of testing is measuring the voltage on the sensor contacts. To do this, rotate the wheel with your hand at a frequency of about 1 cycle per second. With this frequency, the voltage should be 0,25–0,50 V.
This procedure is determined by the vehicle make and model. Typically, the steps are the following:
- Engage the parking brake and secure the axle opposite to the one on which you’re going to replace the component with wheel chocks. Raise the car.
- Remove the wheel.
- Unscrew the fasteners of the brake caliper, pull it aside and secure with a wire.
- Remove the brake pads and a disc.
- Unscrew the sensor fastening bolt and remove the component from its mounting seat.
- Disconnect the wire from the ABS control unit and car body.
- Install a new part by following all steps in reverse order.
Confidence in online shopping! You can return AUSTIN-HEALEY SPRITE abs sensor without explanation within 200 days after purchase and get your money back. How? Just use the Safe Order service at the checkout page. The service cost is only £3.95.
Each order from £2,000.00 value of goods, include free shipping within Great Britain.
*Does not apply to large-size auto parts.
*Except/excluding areas with the following postcodes: GY#####, JE#####, IM#####
