ABS sensor ABE DAEWOO KALOS
ABE ABS sensor
DAEWOO KALOS catalogue online
ABE Wheel speed sensor Top DAEWOO KALOS Models
Sensor ABS DAEWOO KALOS in brand quality: Top Manufacturers
Have you ever bought ABE products from AUTODOC and do you want to share your experience? Help others make the best choice. Leave your feedback and recommendations
ABE ABS wheel speed sensor DAEWOO KALOS of brand quality in our amazing selection
We offer ABE brand produts in OEM quality. Find the right branded ABS sensor spare part your DAEWOO KALOS car in our catagory.
ABE CCZ1633ABE ABS sensor
Front Axle Right, Front Axle Left, Passive sensor, 2-pin connector, 717mm
Sold by AUTODOC
ABE CCZ1634ABE ABS sensor
Front Axle Right, Passive sensor, 2-pin connector, 717mm
Sold by AUTODOC
ABE CCZ1590ABE ABS sensor
Rear, Right, without cable, 2-pin connector, 800mm
Sold by AUTODOC
ABE CCZ1033ABE ABS sensor
Front Axle, Right, 2-pin connector, 620mm
Sold by AUTODOC
ABE CCZ1267ABE ABS sensor
Rear Axle, Left, 2-pin connector, 650mm
Sold by AUTODOC
ABE CCZ1126ABE ABS sensor
Front Axle, Left, Right
Sold by AUTODOC
ABE CCZ1636ABE ABS sensor
Rear Axle, Front Axle Left, Front Axle Right, Active sensor, 915mm
Sold by AUTODOC
ABE CCZ1644ABE ABS sensor
Front Axle, Active sensor, 2-pin connector, 965mm, 965mm
Sold by AUTODOC
ABE CCZ1397ABE ABS sensor
Rear Axle, Right
Sold by AUTODOC
ABE CCZ1124ABE ABS sensor
Rear Axle, Left, Right
Sold by AUTODOC
ABE CCZ1649ABE ABS sensor
Front axle both sides, Rear Axle both sides, Active sensor
Sold by AUTODOC
ABE CCZ1039ABE ABS sensor
Rear Axle, Left, Right, 2-pin connector, 840mm
Sold by AUTODOC
ABE CCZ1544ABE ABS sensor
Rear, 2-pin connector, 954mm, 954mm
Sold by AUTODOC
ABE CCZ1148ABE ABS sensor
Front Axle, Left, Right, 2-pin connector, 122mm
Sold by AUTODOC
ABE CCZ1640ABE ABS sensor
Rear Axle, Active sensor
Sold by AUTODOC
ABE abs sensor for DAEWOO KALOS: top must-read articles
ABE ABS sensor: What is the price of this product for the DAEWOO KALOS?
The price of ABE products in the category ABS sensor for the DAEWOO KALOS ranges from £8.00 to £21.00, depending on the features and specifications.
FAQ
DIY repair is only possible if the ABS malfunction is caused by faulty wheel speed sensors. Due to their location, they are highly exposed to moisture and dirt and therefore often fail. In some cases, it is enough to clean the sensitive element with a dry soft lint-free cloth. If this doesn’t work, replace the component.
If a malfunction of the anti-lock braking system is caused by a failure of the electronic control unit or a hydraulic unit, you will need professional assistance. Visit a car repair shop.
First, inspect the component. Cracks on its housing, torn and oxidised wires, and a damaged connector indicate a malfunction.
Use a multimeter for thorough diagnostics. Before you start testing the component, check how the wheel speed sensors are installed in your car. You can find this information in the vehicle repair manual.
You will need to raise the car and most likely to remove the wheel in order to access the part. Next, disconnect the wire from the ABS control unit. Connect the multimeter probes to the sensor contacts and measure resistance. Compare the received values with nominal data – they are usually specified in the car owner’s manual. As a rule, these values vary within the range of 0,5–2,0 kiloohms.
The next step of testing is measuring the voltage on the sensor contacts. To do this, rotate the wheel with your hand at a frequency of about 1 cycle per second. With this frequency, the voltage should be 0,25–0,50 V.
This procedure is determined by the vehicle make and model. Typically, the steps are the following:
- Engage the parking brake and secure the axle opposite to the one on which you’re going to replace the component with wheel chocks. Raise the car.
- Remove the wheel.
- Unscrew the fasteners of the brake caliper, pull it aside and secure with a wire.
- Remove the brake pads and a disc.
- Unscrew the sensor fastening bolt and remove the component from its mounting seat.
- Disconnect the wire from the ABS control unit and car body.
- Install a new part by following all steps in reverse order.
Confidence in online shopping! You can return ABE abs sensor for DAEWOO KALOS without explanation within 200 days after purchase and get your money back. How? Just use the Safe Order service at the checkout page. The service cost is only £3.95.
Each order from £2,000.00 value of goods, include free shipping within Great Britain.
*Does not apply to large-size auto parts.
*Except/excluding areas with the following postcodes: GY#####, JE#####, IM#####
