ABS sensor METZGER FORD FOCUS
METZGER ABS sensor
FORD FOCUS catalogue online
METZGER Wheel speed sensor Top FORD FOCUS Models
Sensor ABS FORD FOCUS in brand quality: Top Manufacturers
Have you ever bought METZGER products from AUTODOC and do you want to share your experience? Help others make the best choice. Leave your feedback and recommendations
METZGER ABS wheel speed sensor FORD FOCUS of brand quality in our amazing selection
We offer METZGER brand produts in OEM quality. Find the right branded ABS sensor spare part your FORD FOCUS car in our catagory.
METZGER 09001219 ABS sensor
Rear Axle Left, Rear Axle Right, 2-pin connector
Sold by AUTODOC
METZGER 0900024 ABS sensor
Hall Sensor
Sold by AUTODOC
METZGER 0900017 ABS sensor
Hall Sensor
Sold by AUTODOC
METZGER 0900023 ABS sensor
Hall Sensor, 620mm
Sold by AUTODOC
METZGER 0900028 ABS sensor
Hall Sensor
Sold by AUTODOC
METZGER 0900027 ABS sensor
2-pin connector
Sold by AUTODOC
METZGER 0900258 ABS sensor
Hall Sensor
Sold by AUTODOC
METZGER 0900268 ABS sensor ring
for wheel bearing/wheel hub, Rear Axle Left, Rear Axle Right
Sold by AUTODOC
METZGER 09001329 ABS sensor
2-pin connector
Sold by AUTODOC
METZGER 0900029 ABS sensor
Front Axle Left, Front Axle Right, 1150mm
Sold by AUTODOC
METZGER 09001492 ABS sensor
2-pin connector, 660mm
Sold by AUTODOC
METZGER 0900916 ABS sensor
Sold by AUTODOC
METZGER 0900657 ABS sensor
480mm, prepared for wear warning indicator
Sold by AUTODOC
METZGER 0900253 ABS sensor
Inductive Sensor, not prepared for wear warning indicator
Sold by AUTODOC
METZGER 09001627 ABS sensor
705mm, 796mm
Sold by AUTODOC
METZGER abs sensor for FORD FOCUS: top must-read articles
METZGER ABS sensor: What is the price of this product for the FORD FOCUS?
The price of METZGER products in the category ABS sensor for the FORD FOCUS ranges from £8.00 to £30.00, depending on the features and specifications.
faq
DIY repair is only possible if the ABS malfunction is caused by faulty wheel speed sensors. Due to their location, they are highly exposed to moisture and dirt and therefore often fail. In some cases, it is enough to clean the sensitive element with a dry soft lint-free cloth. If this doesn’t work, replace the component.
If a malfunction of the anti-lock braking system is caused by a failure of the electronic control unit or a hydraulic unit, you will need professional assistance. Visit a car repair shop.
First, inspect the component. Cracks on its housing, torn and oxidised wires, and a damaged connector indicate a malfunction.
Use a multimeter for thorough diagnostics. Before you start testing the component, check how the wheel speed sensors are installed in your car. You can find this information in the vehicle repair manual.
You will need to raise the car and most likely to remove the wheel in order to access the part. Next, disconnect the wire from the ABS control unit. Connect the multimeter probes to the sensor contacts and measure resistance. Compare the received values with nominal data – they are usually specified in the car owner’s manual. As a rule, these values vary within the range of 0,5–2,0 kiloohms.
The next step of testing is measuring the voltage on the sensor contacts. To do this, rotate the wheel with your hand at a frequency of about 1 cycle per second. With this frequency, the voltage should be 0,25–0,50 V.
This procedure is determined by the vehicle make and model. Typically, the steps are the following:
- Engage the parking brake and secure the axle opposite to the one on which you’re going to replace the component with wheel chocks. Raise the car.
- Remove the wheel.
- Unscrew the fasteners of the brake caliper, pull it aside and secure with a wire.
- Remove the brake pads and a disc.
- Unscrew the sensor fastening bolt and remove the component from its mounting seat.
- Disconnect the wire from the ABS control unit and car body.
- Install a new part by following all steps in reverse order.
Confidence in online shopping! You can return METZGER abs sensor for FORD FOCUS without explanation within 200 days after purchase and get your money back. How? Just use the Safe Order service at the checkout page. The service cost is only £3.95.
Each order from £2,000.00 value of goods, include free shipping within Great Britain.
*Does not apply to large-size auto parts.
*Except/excluding areas with the following postcodes: GY#####, JE#####, IM#####
