FORD Kuga Mk3 abs sensor
Where to buy FORD Kuga Mk3 abs sensor at a good price? At AUTODOC!
AUTODOC Bestsellers: buy online at a good price to reduce Kuga Mk3 abs sensor replacement costs
Best selling replacement part: ABS sensor FORD . You have the choice between various ABS wheel speed sensor FORD brand manufacturers or to buy another high quality car part
DELPHI SS20746 ABS sensor
Active sensor, 2-pin connector
Sold by AUTODOC
BREMI 51038 ABS sensor
without cable
Sold by AUTODOC
EINPARTS EPS0699 ABS sensor
Front, both sides, Active sensor
Sold by AUTODOC
A.B.S. 33000 ABS sensor
Active sensor, 37mm, 10mm, grey
Sold by AUTODOC
QUINTON HAZELL XABS1060 ABS sensor
Active sensor, 2-pin connector, 44mm, 14mm, rectangular
Sold by AUTODOC
TRISCAN 8180 16305 ABS sensor
2-pin connector, 14mm
Sold by AUTODOC
TRISCAN 8180 16103 ABS sensor
Sold by AUTODOC
BREMI 51647 ABS sensor
without cable, Hall Sensor
Sold by AUTODOC
DELPHI SS20743 ABS sensor
Active sensor, 2-pin connector
Sold by AUTODOC
EINPARTS EPS0701 ABS sensor
Active sensor
Sold by AUTODOC
DELPHI SS20586 ABS sensor
Active sensor, 2-pin connector
Sold by AUTODOC
GH GH-712551 ABS sensor
Rear Axle, Rear Axle Right, Rear Axle Left
Sold by AUTODOC
TRISCAN 8180 10218 ABS sensor
2-pin connector, 14,3mm
Sold by AUTODOC
FAST FT80563 ABS sensor
Rear Axle Left, Rear Axle Right, Active sensor, 2-pin connector, 14mm, black, oval, Male
Sold by AUTODOC
METZGER 09001219 ABS sensor
Rear Axle Left, Rear Axle Right, 2-pin connector
Sold by AUTODOC
BOSCH DF 11 ABS sensor
with cable, Hall Sensor, 701mm
Sold by AUTODOC
FEBI BILSTEIN 32395 ABS sensor ring
Rear Axle Left, Rear Axle Right
Sold by AUTODOC
PartsTec PTA560-0148 ABS sensor
Front Axle, without cable
Sold by AUTODOC
A.B.S. 30189 ABS sensor
Active sensor, 480mm, 530mm, 14mm, black
Sold by AUTODOC
ATE 360282 ABS sensor
479mm, prepared for wear warning indicator
Sold by AUTODOC
Wheel speed sensor FORD Kuga Mk3 car models
The most read articles on the topic abs sensor for FORD Kuga Mk3
ABS sensor FORD Kuga Mk3: which brand is better?
According to our customers, the best spare parts in the product category Anti lock brake sensor (ABS) FORD come from the following brands:
- RIDEX
- STARK
- FEBI BILSTEIN
- ABE
- RIDEX PLUS
Sensor ABS FORD Kuga Mk3: how much does this product cost?
The price of car parts within the category ABS wheel speed sensor FORD Kuga Mk3 ranges from £8.00 to £56.00, depending on the manufacturer and product specifications.
When should the wing mirror be replaced in the FORD Kuga Mk3?
The interval for replacement of the wing mirror in the Kuga Mk3 is recommended after %WING_MIRROR_REPLACEMENT_INTERVAL_KM% kilometres.
Which wing mirror is suitable for the FORD Kuga Mk3: 1.5; 2.0; 2.5?
| Length [mm]: | %WING_MIRROR_LENGTH_MM_ID203% |
| Width [mm]: | %WING_MIRROR_WIDTH_MM_ID206% |
| Height [mm]: | %WING_MIRROR_HEIGHT_MM_ID209% |
| Surface: | %WING_MIRROR_SURFACE_ID599% |
| Number of pins: | %WING_MIRROR_NUMBER_OF_PINS_ID2383% |
| Outer/Inner Mirror: | %WING_MIRROR_OUTER_INNER_MIRROD_ID735% |
What is the price of a wing mirror for the FORD Kuga Mk3?
The wing mirror price for a Kuga Mk3 usually falls between £ 8.99 to £ 55.49.
faq
DIY repair is only possible if the ABS malfunction is caused by faulty wheel speed sensors. Due to their location, they are highly exposed to moisture and dirt and therefore often fail. In some cases, it is enough to clean the sensitive element with a dry soft lint-free cloth. If this doesn’t work, replace the component.
If a malfunction of the anti-lock braking system is caused by a failure of the electronic control unit or a hydraulic unit, you will need professional assistance. Visit a car repair shop.
First, inspect the component. Cracks on its housing, torn and oxidised wires, and a damaged connector indicate a malfunction.
Use a multimeter for thorough diagnostics. Before you start testing the component, check how the wheel speed sensors are installed in your car. You can find this information in the vehicle repair manual.
You will need to raise the car and most likely to remove the wheel in order to access the part. Next, disconnect the wire from the ABS control unit. Connect the multimeter probes to the sensor contacts and measure resistance. Compare the received values with nominal data – they are usually specified in the car owner’s manual. As a rule, these values vary within the range of 0,5–2,0 kiloohms.
The next step of testing is measuring the voltage on the sensor contacts. To do this, rotate the wheel with your hand at a frequency of about 1 cycle per second. With this frequency, the voltage should be 0,25–0,50 V.
This procedure is determined by the vehicle make and model. Typically, the steps are the following:
- Engage the parking brake and secure the axle opposite to the one on which you’re going to replace the component with wheel chocks. Raise the car.
- Remove the wheel.
- Unscrew the fasteners of the brake caliper, pull it aside and secure with a wire.
- Remove the brake pads and a disc.
- Unscrew the sensor fastening bolt and remove the component from its mounting seat.
- Disconnect the wire from the ABS control unit and car body.
- Install a new part by following all steps in reverse order.
Confidence in online shopping! You can return FORD Kuga Mk3 abs sensor without explanation within 200 days after purchase and get your money back. How? Just use the Safe Order service at the checkout page. The service cost is only £3.95.
Each order from £2,000.00 value of goods, include free shipping within Great Britain.
*Does not apply to large-size auto parts.
*Except/excluding areas with the following postcodes: GY#####, JE#####, IM#####
