ABS sensor DELPHI FORD PUMA
DELPHI ABS sensor
FORD PUMA catalogue online
DELPHI Wheel speed sensor Top FORD PUMA Models
Sensor ABS FORD PUMA in brand quality: Top Manufacturers
Have you ever bought DELPHI products from AUTODOC and do you want to share your experience? Help others make the best choice. Leave your feedback and recommendations
DELPHI ABS wheel speed sensor FORD PUMA of brand quality in our amazing selection
We offer DELPHI brand produts in OEM quality. Find the right branded ABS sensor spare part your FORD PUMA car in our catagory.
DELPHI SS20131 ABS sensor
Passive sensor, 4-pin connector, 1071mm
Sold by AUTODOC
DELPHI SS20019 ABS sensor
Passive sensor, 2-pin connector, 813mm
Sold by AUTODOC
DELPHI SS20746 ABS sensor
Active sensor, 2-pin connector
Sold by AUTODOC
DELPHI SS20205 ABS sensor
Active sensor, 2-pin connector, 1288mm
Sold by AUTODOC
DELPHI SS20586 ABS sensor
Active sensor, 2-pin connector
Sold by AUTODOC
DELPHI SS20141 ABS sensor
Active sensor, 2-pin connector, 778mm
Sold by AUTODOC
DELPHI SS20106 ABS sensor
Active sensor, 2-pin connector, 615mm
Sold by AUTODOC
DELPHI SS20052 ABS sensor
Active sensor, 2-pin connector, 520mm
Sold by AUTODOC
DELPHI SS20387 ABS sensor
Active sensor, 2-pin connector, 505mm
Sold by AUTODOC
DELPHI SS20304 ABS sensor
Passive sensor, 2-pin connector, 828mm
Sold by AUTODOC
DELPHI SS20105 ABS sensor
Passive sensor, 2-pin connector, 1180mm
Sold by AUTODOC
DELPHI SS21661-12B1 ABS sensor
Active sensor, 370mm
Sold by AUTODOC
DELPHI SS21525-12B1 ABS sensor
Active sensor, 2-pin connector, 645mm
Sold by AUTODOC
DELPHI SS21516-12B1 ABS sensor
Active sensor, 2-pin connector, 365mm
Sold by AUTODOC
DELPHI SS21234-12B1 ABS sensor
Active sensor, 2-pin connector, 525mm
Sold by AUTODOC
DELPHI abs sensor for FORD PUMA: top must-read articles
DELPHI ABS sensor: What is the price of this product for the FORD PUMA?
The price of DELPHI products in the category ABS sensor for the FORD PUMA ranges from £9.00 to £50.00, depending on the features and specifications.
faq
DIY repair is only possible if the ABS malfunction is caused by faulty wheel speed sensors. Due to their location, they are highly exposed to moisture and dirt and therefore often fail. In some cases, it is enough to clean the sensitive element with a dry soft lint-free cloth. If this doesn’t work, replace the component.
If a malfunction of the anti-lock braking system is caused by a failure of the electronic control unit or a hydraulic unit, you will need professional assistance. Visit a car repair shop.
First, inspect the component. Cracks on its housing, torn and oxidised wires, and a damaged connector indicate a malfunction.
Use a multimeter for thorough diagnostics. Before you start testing the component, check how the wheel speed sensors are installed in your car. You can find this information in the vehicle repair manual.
You will need to raise the car and most likely to remove the wheel in order to access the part. Next, disconnect the wire from the ABS control unit. Connect the multimeter probes to the sensor contacts and measure resistance. Compare the received values with nominal data – they are usually specified in the car owner’s manual. As a rule, these values vary within the range of 0,5–2,0 kiloohms.
The next step of testing is measuring the voltage on the sensor contacts. To do this, rotate the wheel with your hand at a frequency of about 1 cycle per second. With this frequency, the voltage should be 0,25–0,50 V.
This procedure is determined by the vehicle make and model. Typically, the steps are the following:
- Engage the parking brake and secure the axle opposite to the one on which you’re going to replace the component with wheel chocks. Raise the car.
- Remove the wheel.
- Unscrew the fasteners of the brake caliper, pull it aside and secure with a wire.
- Remove the brake pads and a disc.
- Unscrew the sensor fastening bolt and remove the component from its mounting seat.
- Disconnect the wire from the ABS control unit and car body.
- Install a new part by following all steps in reverse order.
Confidence in online shopping! You can return DELPHI abs sensor for FORD PUMA without explanation within 200 days after purchase and get your money back. How? Just use the Safe Order service at the checkout page. The service cost is only £3.95.
Each order from £2,000.00 value of goods, include free shipping within Great Britain.
*Does not apply to large-size auto parts.
*Except/excluding areas with the following postcodes: GY#####, JE#####, IM#####
