ABS sensor VEMO FORD RANGER
VEMO ABS sensor
FORD RANGER catalogue online
VEMO Wheel speed sensor Top FORD RANGER Models
Sensor ABS FORD RANGER in brand quality: Top Manufacturers
Have you ever bought VEMO products from AUTODOC and do you want to share your experience? Help others make the best choice. Leave your feedback and recommendations
VEMO ABS wheel speed sensor FORD RANGER of brand quality in our amazing selection
We offer VEMO brand produts in OEM quality. Find the right branded ABS sensor spare part your FORD RANGER car in our catagory.
VEMO 1055492 ABS sensor
Front Axle, Original VEMO Quality, for vehicles with ABS, 12V
Sold by AUTODOC
VEMO 1102409 ABS sensor
Front Axle
Sold by AUTODOC
VEMO 1013145 ABS sensor
Front Axle Right, Original VEMO Quality, for vehicles with ABS, 12V
Sold by AUTODOC
VEMO 1028205 ABS sensor ring
Front axle both sides, Original VEMO Quality
Sold by AUTODOC
VEMO 1075072 ABS sensor
Front Axle Left, Front Axle Right, 2-pin connector
Sold by AUTODOC
VEMO 1021007 ABS sensor
Rear Axle, Original VEMO Quality, for vehicles with ABS, 12V
Sold by AUTODOC
VEMO 1065580 ABS sensor
Front Axle Right, Front Axle Left, Front Axle, Original VEMO Quality, for vehicles with ABS, Hall Sensor, Passive sensor, 4-pin connector, 479mm, prepared for wear warning indicator, 12V, black
Sold by AUTODOC
VEMO 1007635 ABS sensor
for vehicles with ABS, Active sensor, 55mm, 12V, black
Sold by AUTODOC
VEMO 1074391 ABS sensor
Rear Axle
Sold by AUTODOC
VEMO 1090848 ABS sensor
Rear Axle Right, for vehicles with ABS, 12V
Sold by AUTODOC
VEMO 1050254 ABS sensor
Rear Axle, without cable, Original VEMO Quality, for vehicles with ABS, 12V
Sold by AUTODOC
VEMO 1069174 ABS sensor
Rear Axle, Original VEMO Quality, for vehicles with ABS, Inductive Sensor, 1130 Ohm, 1135mm, 12V, oval
Sold by AUTODOC
VEMO 1034131 ABS sensor
Rear Axle, Original VEMO Quality, for vehicles with ABS, 12V
Sold by AUTODOC
VEMO 1047877 ABS sensor
Rear Axle, Original VEMO Quality, for vehicles with ABS, 12V
Sold by AUTODOC
VEMO 1004678 ABS sensor
Rear Axle Left, Rear Axle Right, Q+, original equipment manufacturer quality MADE IN GERMANY, for vehicles with ABS, Active sensor, 2-pin connector, 706mm, 750mm, 12V
Sold by AUTODOC
VEMO abs sensor for FORD RANGER: top must-read articles
VEMO ABS sensor: What is the price of this product for the FORD RANGER?
The price of VEMO products in the category ABS sensor for the FORD RANGER ranges from £8.00 to £153.00, depending on the features and specifications.
faq
DIY repair is only possible if the ABS malfunction is caused by faulty wheel speed sensors. Due to their location, they are highly exposed to moisture and dirt and therefore often fail. In some cases, it is enough to clean the sensitive element with a dry soft lint-free cloth. If this doesn’t work, replace the component.
If a malfunction of the anti-lock braking system is caused by a failure of the electronic control unit or a hydraulic unit, you will need professional assistance. Visit a car repair shop.
First, inspect the component. Cracks on its housing, torn and oxidised wires, and a damaged connector indicate a malfunction.
Use a multimeter for thorough diagnostics. Before you start testing the component, check how the wheel speed sensors are installed in your car. You can find this information in the vehicle repair manual.
You will need to raise the car and most likely to remove the wheel in order to access the part. Next, disconnect the wire from the ABS control unit. Connect the multimeter probes to the sensor contacts and measure resistance. Compare the received values with nominal data – they are usually specified in the car owner’s manual. As a rule, these values vary within the range of 0,5–2,0 kiloohms.
The next step of testing is measuring the voltage on the sensor contacts. To do this, rotate the wheel with your hand at a frequency of about 1 cycle per second. With this frequency, the voltage should be 0,25–0,50 V.
This procedure is determined by the vehicle make and model. Typically, the steps are the following:
- Engage the parking brake and secure the axle opposite to the one on which you’re going to replace the component with wheel chocks. Raise the car.
- Remove the wheel.
- Unscrew the fasteners of the brake caliper, pull it aside and secure with a wire.
- Remove the brake pads and a disc.
- Unscrew the sensor fastening bolt and remove the component from its mounting seat.
- Disconnect the wire from the ABS control unit and car body.
- Install a new part by following all steps in reverse order.
Confidence in online shopping! You can return VEMO abs sensor for FORD RANGER without explanation within 200 days after purchase and get your money back. How? Just use the Safe Order service at the checkout page. The service cost is only £3.95.
Each order from £2,000.00 value of goods, include free shipping within Great Britain.
*Does not apply to large-size auto parts.
*Except/excluding areas with the following postcodes: GY#####, JE#####, IM#####
