ABS sensor HELLA FORD S-MAX
HELLA ABS sensor
FORD S-MAX catalogue online
HELLA Wheel speed sensor Top FORD S-MAX Models
Sensor ABS FORD S-MAX in brand quality: Top Manufacturers
ABS sensor HELLA FORD S-MAX: review
Top 1 Reviews
Have you ever bought HELLA products from AUTODOC and do you want to share your experience? Help others make the best choice. Leave your feedback and recommendations
HELLA ABS wheel speed sensor FORD S-MAX of brand quality in our amazing selection
We offer HELLA brand produts in OEM quality. Find the right branded ABS sensor spare part your FORD S-MAX car in our catagory.
HELLA 6PU 012 039-971 ABS sensor
Rear Axle, 2-pin connector, 12V
Sold by AUTODOC
HELLA 6PU 230 040-161 ABS sensor
Front Axle, Hall Sensor, 2-pin connector
Sold by AUTODOC
HELLA 6PU 358 217-311 ABS sensor
without cable, Hall Sensor, 2-pin connector
Sold by AUTODOC
HELLA 6PU 358 218-681 ABS sensor
Rear Axle, with clip, Hall Sensor, 2-pin connector, 525mm
Sold by AUTODOC
HELLA 6PU 358 218-771 ABS sensor
Rear Axle, with clip, Hall Sensor, 2-pin connector, 527mm
Sold by AUTODOC
HELLA 6PU 012 039-961 ABS sensor
Front Axle, 2-pin connector, 12V
Sold by AUTODOC
HELLA 6PU 012 806-931 ABS sensor
Rear Axle Right, Rear Axle Left, Hall Sensor, 2-pin connector
Sold by AUTODOC
HELLA 6PU 012 039-981 ABS sensor
Front Axle, Hall Sensor, 2-pin connector, 12V
Sold by AUTODOC
HELLA 6PU 012 806-621 ABS sensor
Hall Sensor, 2-pin connector, 1295mm
Sold by AUTODOC
HELLA 6PU 012 679-631 ABS sensor
Active sensor, 2-pin connector, 675mm, 12V
Sold by AUTODOC
HELLA 6PU 012 039-641 ABS sensor
Rear Axle, 2-pin connector, 706mm, 12V
Sold by AUTODOC
HELLA 6PU 009 106-911 ABS sensor
Front Axle, Hall Sensor, 2-pin connector, 693mm, 12V
Sold by AUTODOC
HELLA 6PU 358 252-271 ABS sensor
with fastening clips on the cable, Hall Sensor, 2-pin connector, 567mm
Sold by AUTODOC
HELLA 6PU 358 252-021 ABS sensor
Hall Sensor, 2-pin connector, 635mm
Sold by AUTODOC
HELLA 6PU 358 216-611 ABS sensor
Hall Sensor, 2-pin connector, 486mm
Sold by AUTODOC
HELLA abs sensor for FORD S-MAX: top must-read articles
HELLA ABS sensor: What is the price of this product for the FORD S-MAX?
The price of HELLA products in the category ABS sensor for the FORD S-MAX ranges from £9.00 to £36.00, depending on the features and specifications.
faq
DIY repair is only possible if the ABS malfunction is caused by faulty wheel speed sensors. Due to their location, they are highly exposed to moisture and dirt and therefore often fail. In some cases, it is enough to clean the sensitive element with a dry soft lint-free cloth. If this doesn’t work, replace the component.
If a malfunction of the anti-lock braking system is caused by a failure of the electronic control unit or a hydraulic unit, you will need professional assistance. Visit a car repair shop.
First, inspect the component. Cracks on its housing, torn and oxidised wires, and a damaged connector indicate a malfunction.
Use a multimeter for thorough diagnostics. Before you start testing the component, check how the wheel speed sensors are installed in your car. You can find this information in the vehicle repair manual.
You will need to raise the car and most likely to remove the wheel in order to access the part. Next, disconnect the wire from the ABS control unit. Connect the multimeter probes to the sensor contacts and measure resistance. Compare the received values with nominal data – they are usually specified in the car owner’s manual. As a rule, these values vary within the range of 0,5–2,0 kiloohms.
The next step of testing is measuring the voltage on the sensor contacts. To do this, rotate the wheel with your hand at a frequency of about 1 cycle per second. With this frequency, the voltage should be 0,25–0,50 V.
This procedure is determined by the vehicle make and model. Typically, the steps are the following:
- Engage the parking brake and secure the axle opposite to the one on which you’re going to replace the component with wheel chocks. Raise the car.
- Remove the wheel.
- Unscrew the fasteners of the brake caliper, pull it aside and secure with a wire.
- Remove the brake pads and a disc.
- Unscrew the sensor fastening bolt and remove the component from its mounting seat.
- Disconnect the wire from the ABS control unit and car body.
- Install a new part by following all steps in reverse order.
Confidence in online shopping! You can return HELLA abs sensor for FORD S-MAX without explanation within 200 days after purchase and get your money back. How? Just use the Safe Order service at the checkout page. The service cost is only £3.95.
Each order from £2,000.00 value of goods, include free shipping within Great Britain.
*Does not apply to large-size auto parts.
*Except/excluding areas with the following postcodes: GY#####, JE#####, IM#####
