FORD Transit Mk1 Platform / Chassis (74E) abs sensor
Where to buy FORD Transit Mk1 Platform / Chassis (74E) abs sensor at a good price? At AUTODOC!
AUTODOC Bestsellers: buy online at a good price to reduce Transit Mk1 Platform / Chassis (74E) abs sensor replacement costs
Best selling replacement part: ABS sensor FORD TRANSIT Platform/Chassis. You have the choice between various ABS wheel speed sensor FORD 74E TRANSIT Platform/Chassis brand manufacturers or to buy another high quality car part
RIDEX 412W0070 ABS sensor
Front axle both sides, Active sensor
Sold by AUTODOC
RIDEX 412W0931 ABS sensor
Rear Axle both sides, Active sensor, 12V
Sold by AUTODOC
RIDEX 412W0127 ABS sensor
Front axle both sides, Hall Sensor, 2-pin connector, 610mm, 25mm, 12V, black, D Shape
Sold by AUTODOC
RIDEX 412W0917 ABS sensor
Front axle both sides, Active sensor, 270mm
Sold by AUTODOC
RIDEX 412W0169 ABS sensor
Front axle both sides, Hall Sensor, 2-pin connector, 800mm, 25mm, 12V, black, D Shape
Sold by AUTODOC
RIDEX 412W0853 ABS sensor
Rear Axle both sides, Active sensor, 2-pin connector, 398mm, 41mm
Sold by AUTODOC
RIDEX 412W0824 ABS sensor
Rear Axle both sides, Hall Sensor, 2-pin connector, 706mm, 750mm, 28mm, black, oval
Sold by AUTODOC
BOSCH DF 11 ABS sensor
with cable, Hall Sensor, 701mm
Sold by AUTODOC
FEBI BILSTEIN 32395 ABS sensor ring
Rear Axle Left, Rear Axle Right
Sold by AUTODOC
PartsTec PTA560-0148 ABS sensor
Front Axle, without cable
Sold by AUTODOC
A.B.S. 30189 ABS sensor
Active sensor, 480mm, 530mm, 14mm, black
Sold by AUTODOC
ATE 360282 ABS sensor
479mm, prepared for wear warning indicator
Sold by AUTODOC
ATE 360358 ABS sensor
without cable
Sold by AUTODOC
BREMI 51026 ABS sensor
without cable
Sold by AUTODOC
MAXGEAR 27-0330 ABS sensor ring
with integrated magnetic sensor ring
Sold by AUTODOC
A.B.S. 31784 ABS sensor
Active sensor, 480mm, 550mm, 14mm, black
Sold by AUTODOC
TRISCAN 8540 24407 ABS sensor ring
with integrated magnetic sensor ring
Sold by AUTODOC
VEMO 1080949 ABS sensor ring
Front axle both sides, Original VEMO Quality
Sold by AUTODOC
MAGNETI MARELLI MWSS130 ABS sensor
Front Axle, 2-pin connector
Sold by AUTODOC
MAGNETI MARELLI MWSS046 ABS sensor
Rear Axle
Sold by AUTODOC
Wheel speed sensor FORD Transit Mk1 Platform / Chassis (74E) car models
The most read articles on the topic abs sensor for FORD Transit Mk1 Platform / Chassis (74E)
ABS sensor FORD Transit Mk1 Platform / Chassis (74E): which brand is better?
According to our customers, the best spare parts in the product category Anti lock brake sensor (ABS) FORD TRANSIT Platform/Chassis come from the following brands:
- RIDEX
- STARK
- FEBI BILSTEIN
- ABE
- RIDEX PLUS
Sensor ABS FORD Transit Mk1 Platform / Chassis (74E): how much does this product cost?
The price of car parts within the category ABS wheel speed sensor FORD Transit Mk1 Platform / Chassis (74E) ranges from £4.00 to £56.00, depending on the manufacturer and product specifications.
faq
DIY repair is only possible if the ABS malfunction is caused by faulty wheel speed sensors. Due to their location, they are highly exposed to moisture and dirt and therefore often fail. In some cases, it is enough to clean the sensitive element with a dry soft lint-free cloth. If this doesn’t work, replace the component.
If a malfunction of the anti-lock braking system is caused by a failure of the electronic control unit or a hydraulic unit, you will need professional assistance. Visit a car repair shop.
First, inspect the component. Cracks on its housing, torn and oxidised wires, and a damaged connector indicate a malfunction.
Use a multimeter for thorough diagnostics. Before you start testing the component, check how the wheel speed sensors are installed in your car. You can find this information in the vehicle repair manual.
You will need to raise the car and most likely to remove the wheel in order to access the part. Next, disconnect the wire from the ABS control unit. Connect the multimeter probes to the sensor contacts and measure resistance. Compare the received values with nominal data – they are usually specified in the car owner’s manual. As a rule, these values vary within the range of 0,5–2,0 kiloohms.
The next step of testing is measuring the voltage on the sensor contacts. To do this, rotate the wheel with your hand at a frequency of about 1 cycle per second. With this frequency, the voltage should be 0,25–0,50 V.
This procedure is determined by the vehicle make and model. Typically, the steps are the following:
- Engage the parking brake and secure the axle opposite to the one on which you’re going to replace the component with wheel chocks. Raise the car.
- Remove the wheel.
- Unscrew the fasteners of the brake caliper, pull it aside and secure with a wire.
- Remove the brake pads and a disc.
- Unscrew the sensor fastening bolt and remove the component from its mounting seat.
- Disconnect the wire from the ABS control unit and car body.
- Install a new part by following all steps in reverse order.
Confidence in online shopping! You can return FORD Transit Mk1 Platform / Chassis (74E) abs sensor without explanation within 200 days after purchase and get your money back. How? Just use the Safe Order service at the checkout page. The service cost is only £3.95.
Each order from £2,000.00 value of goods, include free shipping within Great Britain.
*Does not apply to large-size auto parts.
*Except/excluding areas with the following postcodes: GY#####, JE#####, IM#####
