LAND ROVER RANGE ROVER abs sensor
Where to buy LAND ROVER RANGE ROVER abs sensor at a good price? At AUTODOC!
AUTODOC Bestsellers: buy online at a good price to reduce LAND ROVER RANGE ROVER abs sensor replacement costs
The best selling ABS sensor replacement parts LAND ROVER RANGE ROVER are available for your in original quality from our ABS wheel speed sensor catagory.
RIDEX 412W0796 ABS sensor
Rear Axle both sides, Hall Sensor, 2-pin connector, 1120mm, 28mm, oval
Sold by AUTODOC
RIDEX 412W0426 ABS sensor
Front Axle, Active sensor, 820mm
Sold by AUTODOC
BOSCH DF 11 ABS sensor
with cable, Hall Sensor, 1122mm
Sold by AUTODOC
A.B.S. 30633 ABS sensor
Passive sensor, 1010mm, 1120mm, 41mm, black
Sold by AUTODOC
TRISCAN 8540 17403 ABS sensor ring
Sold by AUTODOC
NTY HCA-LR-007 ABS sensor
Rear Axle Left, Rear Axle Right, Right
Sold by AUTODOC
A.B.S. 30762 ABS sensor
Active sensor, 1000mm, 1100mm, 25mm, blue
Sold by AUTODOC
BOSCH ABS-SENSOR ABS sensor
Sold by AUTODOC
FEBI BILSTEIN 106460 ABS sensor
Front Axle Left, Front Axle Right, 1005mm
Sold by AUTODOC
VEMO 1024586 ABS sensor
Rear Axle, Original VEMO Quality, for vehicles with ABS, 12V
Sold by AUTODOC
VEMO 1090182 ABS sensor
Front Axle Left, Front Axle Right, Original VEMO Quality, for vehicles with ABS, 12V
Sold by AUTODOC
BREMI 50471 ABS sensor
with cable
Sold by AUTODOC
ESEN SKV 06SKV391 ABS sensor
Rear Axle
Sold by AUTODOC
BOSCH ABS-SENSOR ABS sensor
2010mm
Sold by AUTODOC
BOSCH ABS-SENSOR ABS sensor
Sold by AUTODOC
OPTIMAL 06-S876 ABS sensor
Active sensor, 1100mm
Sold by AUTODOC
A.B.S. 31625 ABS sensor for LAND ROVER RANGE ROVER
Active sensor, 655mm, 745mm, 28mm, black
Sold by AUTODOC
ABAKUS 120-03-071 ABS sensor for LAND ROVER RANGE ROVER
Rear Axle, 2-pin connector, 740mm
Sold by AUTODOC
MEYLE MAS0398 ABS sensor for LAND ROVER RANGE ROVER
Rear Axle, Rear Axle both sides, ORIGINAL Quality, Hall Sensor, 2-pin connector, 1131mm
Sold by AUTODOC
A.B.S. 31227 ABS sensor for LAND ROVER RANGE ROVER
Active sensor, 1070mm, 1180mm, 25mm, green
Sold by AUTODOC
ABS sensor LAND ROVER RANGE ROVER in brand quality: Top Manufacturers
Sensor ABS for Top LAND ROVER RANGE ROVER Models
AUTODOC tips and tricks to LAND ROVER RANGE ROVER Wheel speed sensor
Wheel speed sensor Land Rover RANGE ROVER: which brand is better?
According to our customers, the best spare parts in the product category Sensor ABS Land Rover RANGE ROVER come from the following brands:
- FEBI BILSTEIN
- ABE
- DELPHI
- WAGNER
- VEMO
ABS wheel speed sensor Land Rover RANGE ROVER: how much does this product cost?
The price of car parts within the category ABS sensor LAND ROVER RANGE ROVER ranges from £11.00 to £61.00, depending on the manufacturer and product specifications.
FAQ
DIY repair is only possible if the ABS malfunction is caused by faulty wheel speed sensors. Due to their location, they are highly exposed to moisture and dirt and therefore often fail. In some cases, it is enough to clean the sensitive element with a dry soft lint-free cloth. If this doesn’t work, replace the component.
If a malfunction of the anti-lock braking system is caused by a failure of the electronic control unit or a hydraulic unit, you will need professional assistance. Visit a car repair shop.
First, inspect the component. Cracks on its housing, torn and oxidised wires, and a damaged connector indicate a malfunction.
Use a multimeter for thorough diagnostics. Before you start testing the component, check how the wheel speed sensors are installed in your car. You can find this information in the vehicle repair manual.
You will need to raise the car and most likely to remove the wheel in order to access the part. Next, disconnect the wire from the ABS control unit. Connect the multimeter probes to the sensor contacts and measure resistance. Compare the received values with nominal data – they are usually specified in the car owner’s manual. As a rule, these values vary within the range of 0,5–2,0 kiloohms.
The next step of testing is measuring the voltage on the sensor contacts. To do this, rotate the wheel with your hand at a frequency of about 1 cycle per second. With this frequency, the voltage should be 0,25–0,50 V.
This procedure is determined by the vehicle make and model. Typically, the steps are the following:
- Engage the parking brake and secure the axle opposite to the one on which you’re going to replace the component with wheel chocks. Raise the car.
- Remove the wheel.
- Unscrew the fasteners of the brake caliper, pull it aside and secure with a wire.
- Remove the brake pads and a disc.
- Unscrew the sensor fastening bolt and remove the component from its mounting seat.
- Disconnect the wire from the ABS control unit and car body.
- Install a new part by following all steps in reverse order.
Confidence in online shopping! You can return LAND ROVER RANGE ROVER abs sensor without explanation within 200 days after purchase and get your money back. How? Just use the Safe Order service at the checkout page. The service cost is only £3.95.
Each order from £2,000.00 value of goods, include free shipping within Great Britain.
*Does not apply to large-size auto parts.
*Except/excluding areas with the following postcodes: GY#####, JE#####, IM#####
