ABS sensor BLUE PRINT MINI Roadster
BLUE PRINT ABS sensor
MINI Roadster catalogue online
BLUE PRINT Wheel speed sensor Top MINI Roadster Models
Sensor ABS MINI Roadster in brand quality: Top Manufacturers
Have you ever bought BLUE PRINT products from AUTODOC and do you want to share your experience? Help others make the best choice. Leave your feedback and recommendations
BLUE PRINT ABS wheel speed sensor MINI Roadster of brand quality in our amazing selection
We offer BLUE PRINT brand produts in OEM quality. Find the right branded ABS sensor spare part your MINI Roadster car in our catagory.
BLUE PRINT ADB117102 ABS sensor
Rear Axle Left, Rear Axle Right, 850mm
Sold by AUTODOC
BLUE PRINT ADB117101 ABS sensor
Front Axle Left, Front Axle Right, 675mm
Sold by AUTODOC
BLUE PRINT ADB117104 ABS sensor
Rear Axle Left, Rear Axle Right, 940mm, blue, round
Sold by AUTODOC
BLUE PRINT ADB117105 ABS sensor
Front Axle Left, Front Axle Right, 660mm
Sold by AUTODOC
BLUE PRINT ADG07161 ABS sensor
Front Axle Left, Front Axle Right, 800mm
Sold by AUTODOC
BLUE PRINT ADBP710021 ABS sensor ring
Front Axle Left, Front Axle Right
Sold by AUTODOC
BLUE PRINT ADA107108 ABS sensor
Front Axle Left, Front Axle Right, 698mm
Sold by AUTODOC
BLUE PRINT ADH27102 ABS sensor
Front Axle Right, 950mm
Sold by AUTODOC
BLUE PRINT ADH27132 ABS sensor
Front Axle Right, 900mm
Sold by AUTODOC
BLUE PRINT ADN17123 ABS sensor
Front Axle Left, Front Axle Right, 620mm
Sold by AUTODOC
BLUE PRINT ADBP710060 ABS sensor
Front Axle Left, Front Axle Right, 505mm
Sold by AUTODOC
BLUE PRINT ADBP710011 ABS sensor
Front Axle Left, 750mm
Sold by AUTODOC
BLUE PRINT ADG07193 ABS sensor
Front Axle Left, Front Axle Right, 740mm
Sold by AUTODOC
BLUE PRINT ADA107109 ABS sensor
Rear Axle Left, Rear Axle Right, 585mm
Sold by AUTODOC
BLUE PRINT ADN17126 ABS sensor
Front Axle Left, Front Axle Right, 1095mm
Sold by AUTODOC
BLUE PRINT abs sensor for MINI Roadster: top must-read articles
BLUE PRINT ABS sensor: What is the price of this product for the MINI Roadster?
The price of BLUE PRINT products in the category ABS sensor for the MINI Roadster ranges from £8.00 to £36.00, depending on the features and specifications.
faq
DIY repair is only possible if the ABS malfunction is caused by faulty wheel speed sensors. Due to their location, they are highly exposed to moisture and dirt and therefore often fail. In some cases, it is enough to clean the sensitive element with a dry soft lint-free cloth. If this doesn’t work, replace the component.
If a malfunction of the anti-lock braking system is caused by a failure of the electronic control unit or a hydraulic unit, you will need professional assistance. Visit a car repair shop.
First, inspect the component. Cracks on its housing, torn and oxidised wires, and a damaged connector indicate a malfunction.
Use a multimeter for thorough diagnostics. Before you start testing the component, check how the wheel speed sensors are installed in your car. You can find this information in the vehicle repair manual.
You will need to raise the car and most likely to remove the wheel in order to access the part. Next, disconnect the wire from the ABS control unit. Connect the multimeter probes to the sensor contacts and measure resistance. Compare the received values with nominal data – they are usually specified in the car owner’s manual. As a rule, these values vary within the range of 0,5–2,0 kiloohms.
The next step of testing is measuring the voltage on the sensor contacts. To do this, rotate the wheel with your hand at a frequency of about 1 cycle per second. With this frequency, the voltage should be 0,25–0,50 V.
This procedure is determined by the vehicle make and model. Typically, the steps are the following:
- Engage the parking brake and secure the axle opposite to the one on which you’re going to replace the component with wheel chocks. Raise the car.
- Remove the wheel.
- Unscrew the fasteners of the brake caliper, pull it aside and secure with a wire.
- Remove the brake pads and a disc.
- Unscrew the sensor fastening bolt and remove the component from its mounting seat.
- Disconnect the wire from the ABS control unit and car body.
- Install a new part by following all steps in reverse order.
Confidence in online shopping! You can return BLUE PRINT abs sensor for MINI Roadster without explanation within 200 days after purchase and get your money back. How? Just use the Safe Order service at the checkout page. The service cost is only £3.95.
Each order from £2,000.00 value of goods, include free shipping within Great Britain.
*Does not apply to large-size auto parts.
*Except/excluding areas with the following postcodes: GY#####, JE#####, IM#####
