NISSAN CABSTAR E abs sensor
Where to buy NISSAN CABSTAR E abs sensor at a good price? At AUTODOC!
AUTODOC Bestsellers: buy online at a good price to reduce NISSAN CABSTAR E abs sensor replacement costs
The best selling ABS sensor replacement parts NISSAN CABSTAR E are available for your in original quality from our ABS wheel speed sensor catagory.
RIDEX 2254S0014 ABS sensor ring
Number of Teeth: 48, Front axle both sides
Sold by AUTODOC
RIDEX 2254S0018 ABS sensor ring
Front axle both sides
Sold by AUTODOC
RIDEX 412W0145 ABS sensor
Front axle both sides, Hall Sensor, 2-pin connector, 620mm, 12V
Sold by AUTODOC
RIDEX 412W0162 ABS sensor
Front axle both sides, Active sensor, 2-pin connector, 670mm, 12V
Sold by AUTODOC
RIDEX 412W0088 ABS sensor
Front axle both sides, 645mm, 12V
Sold by AUTODOC
RIDEX 412W0103 ABS sensor
Rear Axle both sides, 845mm, 35mm, 945mm
Sold by AUTODOC
RIDEX 412W0281 ABS sensor
Front axle both sides, Hall Sensor, 2-pin connector, 12,5mm, 700mm, 12V
Sold by AUTODOC
RIDEX 412W0858 ABS sensor
Rear Axle both sides, 532mm
Sold by AUTODOC
A.B.S. 31948 ABS sensor
Active sensor, 750mm, 835mm, 45mm, blue
Sold by AUTODOC
Alfa e-Parts AF00959 ABS sensor
Rear Axle, Hall Sensor, 2-pin connector, 545mm, 545mm, blue, black
Sold by AUTODOC
ATE 360362 ABS sensor
532mm
Sold by AUTODOC
A.B.S. 31949 ABS sensor
Active sensor, 515mm, 585mm, 32mm, blue
Sold by AUTODOC
JAPANPARTS ABS-141 ABS sensor
Rear Axle Left
Sold by AUTODOC
MAXGEAR 27-0321 ABS sensor ring
Number of Teeth: 44
Sold by AUTODOC
JAPANPARTS ABS-137 ABS sensor
Rear Axle Left
Sold by AUTODOC
FEBI BILSTEIN 172175 ABS sensor
Front Axle Left, Front Axle Right, 619mm
Sold by AUTODOC
AIC 53018 ABS sensor for NISSAN CABSTAR E
Number of Teeth: 44, Front axle both sides
Sold by AUTODOC
A.B.S. 32055 ABS sensor for NISSAN CABSTAR E
Active sensor, 700mm, 800mm, 38mm, black
Sold by AUTODOC
NTY HCA-RE-011 ABS sensor for NISSAN CABSTAR E
Front Axle Left, Front Axle Right, Hall Sensor, 2-pin connector, 630mm
Sold by AUTODOC
VEMO 1009365 ABS sensor for NISSAN CABSTAR E
Rear Axle both sides, Original VEMO Quality
Sold by AUTODOC
ABS sensor NISSAN CABSTAR E in brand quality: Top Manufacturers
Sensor ABS for Top NISSAN CABSTAR E Models
AUTODOC tips and tricks to NISSAN CABSTAR E Wheel speed sensor
Wheel speed sensor Nissan CABSTAR E: which brand is better?
According to our customers, the best spare parts in the product category Sensor ABS Nissan CABSTAR E come from the following brands:
- WAGNER
- A.B.S.
ABS wheel speed sensor Nissan CABSTAR E: how much does this product cost?
The price of car parts within the category ABS sensor NISSAN CABSTAR E ranges from £6.00 to £68.00, depending on the manufacturer and product specifications.
faq
DIY repair is only possible if the ABS malfunction is caused by faulty wheel speed sensors. Due to their location, they are highly exposed to moisture and dirt and therefore often fail. In some cases, it is enough to clean the sensitive element with a dry soft lint-free cloth. If this doesn’t work, replace the component.
If a malfunction of the anti-lock braking system is caused by a failure of the electronic control unit or a hydraulic unit, you will need professional assistance. Visit a car repair shop.
First, inspect the component. Cracks on its housing, torn and oxidised wires, and a damaged connector indicate a malfunction.
Use a multimeter for thorough diagnostics. Before you start testing the component, check how the wheel speed sensors are installed in your car. You can find this information in the vehicle repair manual.
You will need to raise the car and most likely to remove the wheel in order to access the part. Next, disconnect the wire from the ABS control unit. Connect the multimeter probes to the sensor contacts and measure resistance. Compare the received values with nominal data – they are usually specified in the car owner’s manual. As a rule, these values vary within the range of 0,5–2,0 kiloohms.
The next step of testing is measuring the voltage on the sensor contacts. To do this, rotate the wheel with your hand at a frequency of about 1 cycle per second. With this frequency, the voltage should be 0,25–0,50 V.
This procedure is determined by the vehicle make and model. Typically, the steps are the following:
- Engage the parking brake and secure the axle opposite to the one on which you’re going to replace the component with wheel chocks. Raise the car.
- Remove the wheel.
- Unscrew the fasteners of the brake caliper, pull it aside and secure with a wire.
- Remove the brake pads and a disc.
- Unscrew the sensor fastening bolt and remove the component from its mounting seat.
- Disconnect the wire from the ABS control unit and car body.
- Install a new part by following all steps in reverse order.
Confidence in online shopping! You can return NISSAN CABSTAR E abs sensor without explanation within 200 days after purchase and get your money back. How? Just use the Safe Order service at the checkout page. The service cost is only £3.95.
Each order from £2,000.00 value of goods, include free shipping within Great Britain.
*Does not apply to large-size auto parts.
*Except/excluding areas with the following postcodes: GY#####, JE#####, IM#####
