Opel Meriva B abs sensor
Where to buy Opel Meriva B abs sensor at a good price? At AUTODOC!
AUTODOC Bestsellers: buy online at a good price to reduce Opel Meriva B abs sensor replacement costs
Best selling replacement part: ABS sensor OPEL Meriva B. You have the choice between various ABS wheel speed sensor OPEL S10 Meriva B brand manufacturers or to buy another high quality car part
RIDEX 412W1070 ABS sensor
Front Axle, with cable, Hall Sensor, 867mm
Sold by AUTODOC
BOSCH DF 11 ABS sensor
with cable, Hall Sensor, 867mm
Sold by AUTODOC
VEMO 1007964 ABS sensor
Front Axle, Original VEMO Quality, for vehicles with ABS, 2-pin connector, 810mm, 885mm, 12V, oval
Sold by AUTODOC
A.B.S. 30103 ABS sensor
Active sensor, 810mm, 865mm, 30mm, black
Sold by AUTODOC
WAGNER ABS00302 ABS sensor
Active sensor, 810mm, black
Sold by AUTODOC
MEAT & DORIA 90323E ABS sensor
Front Axle Right, Front Axle Left
Sold by AUTODOC
FEBI BILSTEIN 185975 ABS sensor
Front Axle Left, Front Axle Right, 815mm
Sold by AUTODOC
Alfa e-Parts AF04956 ABS sensor
Rear Axle, Hall Sensor, 2-pin connector, 620mm, black, black
Sold by AUTODOC
TOPRAN 622 754 001 ABS sensor
Front Axle Left, Front Axle Right, with cable, for vehicles with ABS, 890mm
Sold by AUTODOC
FISPA 84.822 ABS sensor
Front Axle Left, Front Axle Right, Active sensor, 2-pin connector, 810mm, oval
Sold by AUTODOC
MEAT & DORIA 90323 ABS sensor
Front Axle Right, Front Axle Left, 810mm
Sold by AUTODOC
AUTLOG AS5024 ABS sensor
Front Axle, 810mm
Sold by AUTODOC
METZGER 09001233 ABS sensor
2-pin connector
Sold by AUTODOC
ERA 560258A ABS sensor
Front Axle Left, Front Axle Right, 2-pin connector, 850mm, 37mm
Sold by AUTODOC
NTY HCA-PL-034 ABS sensor
Front Axle Left, Front Axle Right, with cable, Hall Sensor, 2-pin connector, oval
Sold by AUTODOC
VEMO 1083533 ABS sensor
Front Axle, Hall Sensor, 2-pin connector, 867mm, oval
Sold by AUTODOC
Alfa e-Parts AF03876 ABS sensor
Front Axle, Hall Sensor, 2-pin connector, 845mm, 845mm, black, black
Sold by AUTODOC
STARK SKWSS-0350187 ABS sensor
Front axle both sides, Active sensor, 2-pin connector, 810mm, oval
Sold by AUTODOC
MEYLE MAS0533 ABS sensor
Front Axle, Front axle both sides, Hall Sensor, 2-pin connector, 870mm
Sold by AUTODOC
FAST FT80862 ABS sensor
Rear Axle, with fastening/mounting material, with synthetic grease, 2-pin connector, 2070mm, 2120mm, 24V
Sold by AUTODOC
Wheel speed sensor OPEL Meriva B (S10) car models
The most read articles on the topic abs sensor for Opel Meriva B
ABS sensor Opel Meriva B: which brand is better?
According to our customers, the best spare parts in the product category Anti lock brake sensor (ABS) OPEL Meriva B come from the following brands:
- RIDEX
- STARK
- FEBI BILSTEIN
- ABE
- RIDEX PLUS
Sensor ABS OPEL Meriva B (S10): how much does this product cost?
The price of car parts within the category ABS wheel speed sensor OPEL Meriva B (S10) ranges from £11.00 to £66.00, depending on the manufacturer and product specifications.
faq
DIY repair is only possible if the ABS malfunction is caused by faulty wheel speed sensors. Due to their location, they are highly exposed to moisture and dirt and therefore often fail. In some cases, it is enough to clean the sensitive element with a dry soft lint-free cloth. If this doesn’t work, replace the component.
If a malfunction of the anti-lock braking system is caused by a failure of the electronic control unit or a hydraulic unit, you will need professional assistance. Visit a car repair shop.
First, inspect the component. Cracks on its housing, torn and oxidised wires, and a damaged connector indicate a malfunction.
Use a multimeter for thorough diagnostics. Before you start testing the component, check how the wheel speed sensors are installed in your car. You can find this information in the vehicle repair manual.
You will need to raise the car and most likely to remove the wheel in order to access the part. Next, disconnect the wire from the ABS control unit. Connect the multimeter probes to the sensor contacts and measure resistance. Compare the received values with nominal data – they are usually specified in the car owner’s manual. As a rule, these values vary within the range of 0,5–2,0 kiloohms.
The next step of testing is measuring the voltage on the sensor contacts. To do this, rotate the wheel with your hand at a frequency of about 1 cycle per second. With this frequency, the voltage should be 0,25–0,50 V.
This procedure is determined by the vehicle make and model. Typically, the steps are the following:
- Engage the parking brake and secure the axle opposite to the one on which you’re going to replace the component with wheel chocks. Raise the car.
- Remove the wheel.
- Unscrew the fasteners of the brake caliper, pull it aside and secure with a wire.
- Remove the brake pads and a disc.
- Unscrew the sensor fastening bolt and remove the component from its mounting seat.
- Disconnect the wire from the ABS control unit and car body.
- Install a new part by following all steps in reverse order.
Confidence in online shopping! You can return Opel Meriva B abs sensor without explanation within 200 days after purchase and get your money back. How? Just use the Safe Order service at the checkout page. The service cost is only £3.95.
Each order from £2,000.00 value of goods, include free shipping within Great Britain.
*Does not apply to large-size auto parts.
*Except/excluding areas with the following postcodes: GY#####, JE#####, IM#####
