ABS sensor A.B.S. OPEL TIGRA
A.B.S. ABS sensor
OPEL TIGRA catalogue online
A.B.S. Wheel speed sensor Top OPEL TIGRA Models
Sensor ABS OPEL TIGRA in brand quality: Top Manufacturers
Have you ever bought A.B.S. products from AUTODOC and do you want to share your experience? Help others make the best choice. Leave your feedback and recommendations
A.B.S. ABS wheel speed sensor OPEL TIGRA of brand quality in our amazing selection
We offer A.B.S. brand produts in OEM quality. Find the right branded ABS sensor spare part your OPEL TIGRA car in our catagory.
A.B.S. 30070 ABS sensor
Passive sensor, 425mm, 505mm, 28mm, black
Sold by AUTODOC
A.B.S. 30067 ABS sensor
Passive sensor, 1035mm, 1175mm, 48mm, white
Sold by AUTODOC
A.B.S. 30071 ABS sensor
Passive sensor, 505mm, 610mm, 28mm, white
Sold by AUTODOC
A.B.S. 31777 ABS sensor
Active sensor, 975mm, 1055mm, 37mm, black
Sold by AUTODOC
A.B.S. 30525 ABS sensor
Active sensor, 830mm, 930mm, 22mm, grey
Sold by AUTODOC
A.B.S. 32077 ABS sensor
Active sensor, 705mm, 795mm, 38mm, black
Sold by AUTODOC
A.B.S. 32122 ABS sensor
Active sensor, 1055mm, 1145mm, 37mm, black
Sold by AUTODOC
A.B.S. 31844 ABS sensor
Active sensor, 635mm, 705mm, 24mm, black
Sold by AUTODOC
A.B.S. 30942 ABS sensor
Active sensor, 685mm, 780mm, 27mm, blue
Sold by AUTODOC
A.B.S. 31778 ABS sensor
Active sensor, 770mm, 870mm, 37mm, black
Sold by AUTODOC
A.B.S. 30571 ABS sensor
Active sensor, 770mm, 810mm, 28mm, black
Sold by AUTODOC
A.B.S. 32121 ABS sensor
Active sensor, 90mm, 190mm, 37mm, black
Sold by AUTODOC
A.B.S. 31060 ABS sensor
Passive sensor, 685mm, 750mm, 18mm, blue
Sold by AUTODOC
A.B.S. 30354 ABS sensor
Active sensor, 1020mm, 1080mm, 35mm, blue
Sold by AUTODOC
A.B.S. 30223 ABS sensor
Active sensor, 550mm, 605mm, 38mm, grey
Sold by AUTODOC
A.B.S. abs sensor for OPEL TIGRA: top must-read articles
A.B.S. ABS sensor: What is the price of this product for the OPEL TIGRA?
The price of A.B.S. products in the category ABS sensor for the OPEL TIGRA ranges from £14.00 to £26.00, depending on the features and specifications.
faq
DIY repair is only possible if the ABS malfunction is caused by faulty wheel speed sensors. Due to their location, they are highly exposed to moisture and dirt and therefore often fail. In some cases, it is enough to clean the sensitive element with a dry soft lint-free cloth. If this doesn’t work, replace the component.
If a malfunction of the anti-lock braking system is caused by a failure of the electronic control unit or a hydraulic unit, you will need professional assistance. Visit a car repair shop.
First, inspect the component. Cracks on its housing, torn and oxidised wires, and a damaged connector indicate a malfunction.
Use a multimeter for thorough diagnostics. Before you start testing the component, check how the wheel speed sensors are installed in your car. You can find this information in the vehicle repair manual.
You will need to raise the car and most likely to remove the wheel in order to access the part. Next, disconnect the wire from the ABS control unit. Connect the multimeter probes to the sensor contacts and measure resistance. Compare the received values with nominal data – they are usually specified in the car owner’s manual. As a rule, these values vary within the range of 0,5–2,0 kiloohms.
The next step of testing is measuring the voltage on the sensor contacts. To do this, rotate the wheel with your hand at a frequency of about 1 cycle per second. With this frequency, the voltage should be 0,25–0,50 V.
This procedure is determined by the vehicle make and model. Typically, the steps are the following:
- Engage the parking brake and secure the axle opposite to the one on which you’re going to replace the component with wheel chocks. Raise the car.
- Remove the wheel.
- Unscrew the fasteners of the brake caliper, pull it aside and secure with a wire.
- Remove the brake pads and a disc.
- Unscrew the sensor fastening bolt and remove the component from its mounting seat.
- Disconnect the wire from the ABS control unit and car body.
- Install a new part by following all steps in reverse order.
Confidence in online shopping! You can return A.B.S. abs sensor for OPEL TIGRA without explanation within 200 days after purchase and get your money back. How? Just use the Safe Order service at the checkout page. The service cost is only £3.95.
Each order from £2,000.00 value of goods, include free shipping within Great Britain.
*Does not apply to large-size auto parts.
*Except/excluding areas with the following postcodes: GY#####, JE#####, IM#####
