ABS sensor MAXGEAR OPEL VECTRA
MAXGEAR ABS sensor
OPEL VECTRA catalogue online
MAXGEAR Wheel speed sensor Top OPEL VECTRA Models
Sensor ABS OPEL VECTRA in brand quality: Top Manufacturers
Have you ever bought MAXGEAR products from AUTODOC and do you want to share your experience? Help others make the best choice. Leave your feedback and recommendations
MAXGEAR ABS wheel speed sensor OPEL VECTRA of brand quality in our amazing selection
We offer MAXGEAR brand produts in OEM quality. Find the right branded ABS sensor spare part your OPEL VECTRA car in our catagory.
MAXGEAR 27-0325 ABS sensor ring
Number of Teeth: 29
Sold by AUTODOC
MAXGEAR 530411/MG ABS sensor
Front Axle, Passive sensor, 733mm
Sold by AUTODOC
MAXGEAR 27-0329 ABS sensor ring
Number of Teeth: 29
Sold by AUTODOC
MAXGEAR 27-0360 ABS sensor ring
Number of Teeth: 29, Front Axle
Sold by AUTODOC
MAXGEAR 27-0330 ABS sensor ring
with integrated magnetic sensor ring
Sold by AUTODOC
MAXGEAR 20-0421 ABS sensor
Front Axle, 645mm
Sold by AUTODOC
MAXGEAR 20-0397 ABS sensor
2-pin connector, 1126mm, 43,5mm
Sold by AUTODOC
MAXGEAR 20-0276 ABS sensor
Rear Axle, Active sensor, 251mm
Sold by AUTODOC
MAXGEAR 27-0348 ABS sensor ring
Number of Teeth: 43
Sold by AUTODOC
MAXGEAR 20-0471 ABS sensor
Rear Axle, Active sensor, 2-pin connector, 530mm
Sold by AUTODOC
MAXGEAR 20-0428 ABS sensor
Rear Axle, with cable, Hall Sensor, 745mm
Sold by AUTODOC
MAXGEAR 20-0267 ABS sensor
Rear Axle, for vehicles with ABS, 643mm, 12V
Sold by AUTODOC
MAXGEAR 20-0388 ABS sensor
Rear Axle, 2-pin connector, 765mm
Sold by AUTODOC
MAXGEAR 20-0319 ABS sensor
Front Axle, with cable, Hall Sensor, 786mm
Sold by AUTODOC
MAXGEAR 20-0290 ABS sensor
Front Axle, 2-pin connector, 28,3mm
Sold by AUTODOC
MAXGEAR abs sensor for OPEL VECTRA: top must-read articles
MAXGEAR ABS sensor: What is the price of this product for the OPEL VECTRA?
The price of MAXGEAR products in the category ABS sensor for the OPEL VECTRA ranges from £10.00 to £29.00, depending on the features and specifications.
faq
DIY repair is only possible if the ABS malfunction is caused by faulty wheel speed sensors. Due to their location, they are highly exposed to moisture and dirt and therefore often fail. In some cases, it is enough to clean the sensitive element with a dry soft lint-free cloth. If this doesn’t work, replace the component.
If a malfunction of the anti-lock braking system is caused by a failure of the electronic control unit or a hydraulic unit, you will need professional assistance. Visit a car repair shop.
First, inspect the component. Cracks on its housing, torn and oxidised wires, and a damaged connector indicate a malfunction.
Use a multimeter for thorough diagnostics. Before you start testing the component, check how the wheel speed sensors are installed in your car. You can find this information in the vehicle repair manual.
You will need to raise the car and most likely to remove the wheel in order to access the part. Next, disconnect the wire from the ABS control unit. Connect the multimeter probes to the sensor contacts and measure resistance. Compare the received values with nominal data – they are usually specified in the car owner’s manual. As a rule, these values vary within the range of 0,5–2,0 kiloohms.
The next step of testing is measuring the voltage on the sensor contacts. To do this, rotate the wheel with your hand at a frequency of about 1 cycle per second. With this frequency, the voltage should be 0,25–0,50 V.
This procedure is determined by the vehicle make and model. Typically, the steps are the following:
- Engage the parking brake and secure the axle opposite to the one on which you’re going to replace the component with wheel chocks. Raise the car.
- Remove the wheel.
- Unscrew the fasteners of the brake caliper, pull it aside and secure with a wire.
- Remove the brake pads and a disc.
- Unscrew the sensor fastening bolt and remove the component from its mounting seat.
- Disconnect the wire from the ABS control unit and car body.
- Install a new part by following all steps in reverse order.
Confidence in online shopping! You can return MAXGEAR abs sensor for OPEL VECTRA without explanation within 200 days after purchase and get your money back. How? Just use the Safe Order service at the checkout page. The service cost is only £3.95.
Each order from £2,000.00 value of goods, include free shipping within Great Britain.
*Does not apply to large-size auto parts.
*Except/excluding areas with the following postcodes: GY#####, JE#####, IM#####
