ABS sensor NK OPEL VIVARO
NK ABS sensor
OPEL VIVARO catalogue online
NK Wheel speed sensor Top OPEL VIVARO Models
Sensor ABS OPEL VIVARO in brand quality: Top Manufacturers
Have you ever bought NK products from AUTODOC and do you want to share your experience? Help others make the best choice. Leave your feedback and recommendations
NK ABS wheel speed sensor OPEL VIVARO of brand quality in our amazing selection
We offer NK brand produts in OEM quality. Find the right branded ABS sensor spare part your OPEL VIVARO car in our catagory.
NK 293944 ABS sensor
Sold by AUTODOC
NK 293606 ABS sensor
Active sensor, 650mm
Sold by AUTODOC
NK 293608 ABS sensor
Sold by AUTODOC
NK 293943 ABS sensor
Active sensor, 641mm
Sold by AUTODOC
NK 393611 ABS sensor ring
Sold by AUTODOC
NK 293631 ABS sensor
551mm
Sold by AUTODOC
NK 293629 ABS sensor
Sold by AUTODOC
NK 295232 ABS sensor
Sold by AUTODOC
NK 295230 ABS sensor
Sold by AUTODOC
NK 293964 ABS sensor
Active sensor, 704mm
Sold by AUTODOC
NK 293626 ABS sensor
Sold by AUTODOC
NK 293624 ABS sensor
Sold by AUTODOC
NK 292368 ABS sensor
775mm
Sold by AUTODOC
NK 293615 ABS sensor
Sold by AUTODOC
NK 293613 ABS sensor
Sold by AUTODOC
NK abs sensor for OPEL VIVARO: top must-read articles
NK ABS sensor: What is the price of this product for the OPEL VIVARO?
The price of NK products in the category ABS sensor for the OPEL VIVARO ranges from £8.00 to £34.00, depending on the features and specifications.
faq
DIY repair is only possible if the ABS malfunction is caused by faulty wheel speed sensors. Due to their location, they are highly exposed to moisture and dirt and therefore often fail. In some cases, it is enough to clean the sensitive element with a dry soft lint-free cloth. If this doesn’t work, replace the component.
If a malfunction of the anti-lock braking system is caused by a failure of the electronic control unit or a hydraulic unit, you will need professional assistance. Visit a car repair shop.
First, inspect the component. Cracks on its housing, torn and oxidised wires, and a damaged connector indicate a malfunction.
Use a multimeter for thorough diagnostics. Before you start testing the component, check how the wheel speed sensors are installed in your car. You can find this information in the vehicle repair manual.
You will need to raise the car and most likely to remove the wheel in order to access the part. Next, disconnect the wire from the ABS control unit. Connect the multimeter probes to the sensor contacts and measure resistance. Compare the received values with nominal data – they are usually specified in the car owner’s manual. As a rule, these values vary within the range of 0,5–2,0 kiloohms.
The next step of testing is measuring the voltage on the sensor contacts. To do this, rotate the wheel with your hand at a frequency of about 1 cycle per second. With this frequency, the voltage should be 0,25–0,50 V.
This procedure is determined by the vehicle make and model. Typically, the steps are the following:
- Engage the parking brake and secure the axle opposite to the one on which you’re going to replace the component with wheel chocks. Raise the car.
- Remove the wheel.
- Unscrew the fasteners of the brake caliper, pull it aside and secure with a wire.
- Remove the brake pads and a disc.
- Unscrew the sensor fastening bolt and remove the component from its mounting seat.
- Disconnect the wire from the ABS control unit and car body.
- Install a new part by following all steps in reverse order.
Confidence in online shopping! You can return NK abs sensor for OPEL VIVARO without explanation within 200 days after purchase and get your money back. How? Just use the Safe Order service at the checkout page. The service cost is only £3.95.
Each order from £2,000.00 value of goods, include free shipping within Great Britain.
*Does not apply to large-size auto parts.
*Except/excluding areas with the following postcodes: GY#####, JE#####, IM#####
