ABS sensor MEYLE RENAULT LAGUNA
MEYLE ABS sensor
RENAULT LAGUNA catalogue online
MEYLE Wheel speed sensor Top RENAULT LAGUNA Models
Sensor ABS RENAULT LAGUNA in brand quality: Top Manufacturers
Have you ever bought MEYLE products from AUTODOC and do you want to share your experience? Help others make the best choice. Leave your feedback and recommendations
MEYLE ABS wheel speed sensor RENAULT LAGUNA of brand quality in our amazing selection
We offer MEYLE brand produts in OEM quality. Find the right branded ABS sensor spare part your RENAULT LAGUNA car in our catagory.
MEYLE MCX0266 ABS sensor ring
Front Axle, ORIGINAL Quality
Sold by AUTODOC
MEYLE MAS0551 ABS sensor
Front Axle, Front axle both sides, Hall Sensor, 2-pin connector, 595mm
Sold by AUTODOC
MEYLE MAS0585 ABS sensor
Front Axle, Front axle both sides, Hall Sensor, 2-pin connector, 635mm
Sold by AUTODOC
MEYLE MAS0575 ABS sensor
Rear Axle Left, Hall Sensor, 2-pin connector, 660mm
Sold by AUTODOC
MEYLE MAS0443 ABS sensor
Front Axle, Front axle both sides, Hall Sensor, 2-pin connector, 726mm
Sold by AUTODOC
MEYLE MAS0116 ABS sensor
Front Axle, Front axle both sides, ORIGINAL Quality, for vehicles with ABS, Inductive Sensor, 2-pin connector, 662mm
Sold by AUTODOC
MEYLE MAS0347 ABS sensor
Rear Axle, Rear Axle both sides, ORIGINAL Quality, Hall Sensor, 2-pin connector, 891mm
Sold by AUTODOC
MEYLE MAS0332 ABS sensor
Front Axle, Front axle both sides, ORIGINAL Quality, Hall Sensor, 2-pin connector, 531mm
Sold by AUTODOC
MEYLE MAS0708 ABS sensor
Rear Axle Right, Inductive Sensor, 2-pin connector, 487mm
Sold by AUTODOC
MEYLE MAS0706 ABS sensor
Front Axle, Front axle both sides, Hall Sensor, 2-pin connector, 700mm
Sold by AUTODOC
MEYLE MAS0704 ABS sensor
Rear Axle Left, Hall Sensor, 2-pin connector, 569mm
Sold by AUTODOC
MEYLE MAS0702 ABS sensor
Rear Axle, Rear Axle both sides, Hall Sensor, 2-pin connector, 890mm
Sold by AUTODOC
MEYLE MAS0696 ABS sensor
Hall Sensor, 2-pin connector, 1925mm
Sold by AUTODOC
MEYLE MAS0639 ABS sensor
Rear Axle Right, Hall Sensor, 2-pin connector, 1540mm
Sold by AUTODOC
MEYLE MAS0633 ABS sensor
Rear Axle Left, Hall Sensor, 2-pin connector, 490mm
Sold by AUTODOC
MEYLE abs sensor for RENAULT LAGUNA: top must-read articles
MEYLE ABS sensor: What is the price of this product for the RENAULT LAGUNA?
The price of MEYLE products in the category ABS sensor for the RENAULT LAGUNA ranges from £15.00 to £34.00, depending on the features and specifications.
faq
DIY repair is only possible if the ABS malfunction is caused by faulty wheel speed sensors. Due to their location, they are highly exposed to moisture and dirt and therefore often fail. In some cases, it is enough to clean the sensitive element with a dry soft lint-free cloth. If this doesn’t work, replace the component.
If a malfunction of the anti-lock braking system is caused by a failure of the electronic control unit or a hydraulic unit, you will need professional assistance. Visit a car repair shop.
First, inspect the component. Cracks on its housing, torn and oxidised wires, and a damaged connector indicate a malfunction.
Use a multimeter for thorough diagnostics. Before you start testing the component, check how the wheel speed sensors are installed in your car. You can find this information in the vehicle repair manual.
You will need to raise the car and most likely to remove the wheel in order to access the part. Next, disconnect the wire from the ABS control unit. Connect the multimeter probes to the sensor contacts and measure resistance. Compare the received values with nominal data – they are usually specified in the car owner’s manual. As a rule, these values vary within the range of 0,5–2,0 kiloohms.
The next step of testing is measuring the voltage on the sensor contacts. To do this, rotate the wheel with your hand at a frequency of about 1 cycle per second. With this frequency, the voltage should be 0,25–0,50 V.
This procedure is determined by the vehicle make and model. Typically, the steps are the following:
- Engage the parking brake and secure the axle opposite to the one on which you’re going to replace the component with wheel chocks. Raise the car.
- Remove the wheel.
- Unscrew the fasteners of the brake caliper, pull it aside and secure with a wire.
- Remove the brake pads and a disc.
- Unscrew the sensor fastening bolt and remove the component from its mounting seat.
- Disconnect the wire from the ABS control unit and car body.
- Install a new part by following all steps in reverse order.
Confidence in online shopping! You can return MEYLE abs sensor for RENAULT LAGUNA without explanation within 200 days after purchase and get your money back. How? Just use the Safe Order service at the checkout page. The service cost is only £3.95.
Each order from £2,000.00 value of goods, include free shipping within Great Britain.
*Does not apply to large-size auto parts.
*Except/excluding areas with the following postcodes: GY#####, JE#####, IM#####
