SAAB 99 Saloon abs sensor
Where to buy SAAB 99 Saloon abs sensor at a good price? At AUTODOC!
AUTODOC Bestsellers: buy online at a good price to reduce 99 Saloon abs sensor replacement costs
Best selling replacement part: ABS sensor SAAB . You have the choice between various ABS wheel speed sensor SAAB brand manufacturers or to buy another high quality car part
RIDEX 412W0324 ABS sensor
Rear Axle both sides, for vehicles with ABS, 765mm, 36,8mm, 12V
Sold by AUTODOC
RIDEX 412W0357 ABS sensor
Front axle both sides
Sold by AUTODOC
ABE CCZ1383ABE ABS sensor
Front axle both sides
Sold by AUTODOC
ABAKUS 120-02-126 ABS sensor
Front Axle, Inductive Sensor, 2-pin connector, 1140mm
Sold by AUTODOC
ERA 560264A ABS sensor
Front Axle Left, Front Axle Right, 2-pin connector, 330mm, 37mm
Sold by AUTODOC
FAST FT80862 ABS sensor
Rear Axle, with fastening/mounting material, with synthetic grease, 2-pin connector, 2070mm, 2120mm, 24V
Sold by AUTODOC
AIC 54220 ABS sensor ring
Front axle both sides
Sold by AUTODOC
DELPHI SS20377 ABS sensor
Active sensor, 2-pin connector, 740mm
Sold by AUTODOC
AIC 53352 ABS sensor ring
Number of Teeth: 29, Front axle both sides
Sold by AUTODOC
A.B.S. 30115 ABS sensor
Passive sensor, 1110mm, 1160mm, 31mm, brown
Sold by AUTODOC
ERA 560324A ABS sensor
Front Axle Left, 2-pin connector, 1140mm, 31mm
Sold by AUTODOC
VEMO 1061226 ABS sensor ring
Front axle both sides, Original VEMO Quality
Sold by AUTODOC
MOBILETRON AB-EU165 ABS sensor
Hall Sensor, 2-pin connector, 765mm
Sold by AUTODOC
A.B.S. 30113 ABS sensor
Passive sensor, 1110mm, 1190mm, 31mm, black
Sold by AUTODOC
METZGER 0900691 ABS sensor
740mm
Sold by AUTODOC
ATE 360327 ABS sensor
766mm
Sold by AUTODOC
A.B.S. 30277 ABS sensor
Passive sensor, 940mm, 1060mm, 25mm, black
Sold by AUTODOC
METZGER 09001280 ABS sensor
2-pin connector
Sold by AUTODOC
ERA 560325A ABS sensor
Rear Axle Right, 2-pin connector, 1150mm, 33mm
Sold by AUTODOC
A.B.S. 30586 ABS sensor
Passive sensor, 1220mm, 1320mm, 28mm, brown
Sold by AUTODOC
Wheel speed sensor SAAB 99 Saloon car models
The most read articles on the topic abs sensor for SAAB 99 Saloon
ABS sensor SAAB 99 Saloon: which brand is better?
According to our customers, the best spare parts in the product category Anti lock brake sensor (ABS) SAAB come from the following brands:
- RIDEX
- STARK
- FEBI BILSTEIN
- ABE
- RIDEX PLUS
Sensor ABS SAAB 99 Saloon: how much does this product cost?
The price of car parts within the category ABS wheel speed sensor SAAB 99 Saloon ranges from £4.00 to £88.00, depending on the manufacturer and product specifications.
FAQ
DIY repair is only possible if the ABS malfunction is caused by faulty wheel speed sensors. Due to their location, they are highly exposed to moisture and dirt and therefore often fail. In some cases, it is enough to clean the sensitive element with a dry soft lint-free cloth. If this doesn’t work, replace the component.
If a malfunction of the anti-lock braking system is caused by a failure of the electronic control unit or a hydraulic unit, you will need professional assistance. Visit a car repair shop.
First, inspect the component. Cracks on its housing, torn and oxidised wires, and a damaged connector indicate a malfunction.
Use a multimeter for thorough diagnostics. Before you start testing the component, check how the wheel speed sensors are installed in your car. You can find this information in the vehicle repair manual.
You will need to raise the car and most likely to remove the wheel in order to access the part. Next, disconnect the wire from the ABS control unit. Connect the multimeter probes to the sensor contacts and measure resistance. Compare the received values with nominal data – they are usually specified in the car owner’s manual. As a rule, these values vary within the range of 0,5–2,0 kiloohms.
The next step of testing is measuring the voltage on the sensor contacts. To do this, rotate the wheel with your hand at a frequency of about 1 cycle per second. With this frequency, the voltage should be 0,25–0,50 V.
This procedure is determined by the vehicle make and model. Typically, the steps are the following:
- Engage the parking brake and secure the axle opposite to the one on which you’re going to replace the component with wheel chocks. Raise the car.
- Remove the wheel.
- Unscrew the fasteners of the brake caliper, pull it aside and secure with a wire.
- Remove the brake pads and a disc.
- Unscrew the sensor fastening bolt and remove the component from its mounting seat.
- Disconnect the wire from the ABS control unit and car body.
- Install a new part by following all steps in reverse order.
Confidence in online shopping! You can return SAAB 99 Saloon abs sensor without explanation within 200 days after purchase and get your money back. How? Just use the Safe Order service at the checkout page. The service cost is only £3.95.
Each order from £2,000.00 value of goods, include free shipping within Great Britain.
*Does not apply to large-size auto parts.
*Except/excluding areas with the following postcodes: GY#####, JE#####, IM#####
