Seat Arosa 6h abs sensor
Where to buy Seat Arosa 6h abs sensor at a good price? At AUTODOC!
AUTODOC Bestsellers: buy online at a good price to reduce Seat Arosa 6h abs sensor replacement costs
Best selling replacement part: ABS sensor SEAT AROSA. You have the choice between various ABS wheel speed sensor SEAT 6H AROSA brand manufacturers or to buy another high quality car part
RIDEX 2254S0016 ABS sensor ring
for wheel bearing/wheel hub, Rear Axle
Sold by AUTODOC
RIDEX 412W0003 ABS sensor
Front Axle Right, without cable, Inductive Sensor, 2-pin connector, 1,1 kOhm, 28mm, oval
Sold by AUTODOC
BOSCH WS004 ABS sensor
without cable, Passive sensor, 74mm
Sold by AUTODOC
BOSCH WS000 ABS sensor
without cable, Passive sensor, 68mm
Sold by AUTODOC
DELPHI SS10308-11B1 ABS sensor
Passive sensor, 2-pin connector
Sold by AUTODOC
BOSCH WS001 ABS sensor
without cable, Passive sensor, 68mm
Sold by AUTODOC
FEBI BILSTEIN 21582 ABS sensor
Front Axle Left
Sold by AUTODOC
FEBI BILSTEIN 21584 ABS sensor
Front Axle Right
Sold by AUTODOC
DELPHI SS20000 ABS sensor
Passive sensor, 2-pin connector
Sold by AUTODOC
HELLA 066030 ABS sensor
Front Axle Left, Inductive Sensor, 2-pin connector, 12V
Sold by AUTODOC
ERA 560002A ABS sensor
Rear Axle Left, Rear Axle Right, 2-pin connector, 1 kOhm, 37mm
Sold by AUTODOC
MEYLE MAS0067 ABS sensor
Front Axle Left, without cable, ORIGINAL Quality, Inductive Sensor, 2-pin connector
Sold by AUTODOC
MEYLE MAS0068 ABS sensor
Front Axle Right, without cable, ORIGINAL Quality, Inductive Sensor, 2-pin connector
Sold by AUTODOC
STARK SKWSS-0350003 ABS sensor
Rear, Rear Axle both sides, without cable, for vehicles with ABS, Inductive Sensor, Passive sensor, 2-pin connector, 1100 Ohm, 37,3mm, 12V, black, Plastic
Sold by AUTODOC
STARK SKWSS-0350001 ABS sensor
Front Axle Left, Inductive Sensor, 1100 Ohm, 27,7mm, 2
Sold by AUTODOC
ABAKUS 120-02-123 ABS sensor
Front Axle, Inductive Sensor, 2-pin connector, 560mm
Sold by AUTODOC
KRAFT 9410010 ABS sensor
Sold by AUTODOC
ABAKUS 120-02-034 ABS sensor
Front Axle Left, Inductive Sensor, 2-pin connector
Sold by AUTODOC
ABAKUS 120-03-094 ABS sensor
Rear Axle, Passive sensor, 2-pin connector
Sold by AUTODOC
METZGER 0900096 ABS sensor ring
for wheel bearing/wheel hub, Rear Axle Left, Rear Axle Right
Sold by AUTODOC
Wheel speed sensor SEAT Arosa (6H) car models
The most read articles on the topic abs sensor for Seat Arosa 6h
ABS sensor Seat Arosa 6h: which brand is better?
According to our customers, the best spare parts in the product category Anti lock brake sensor (ABS) SEAT AROSA come from the following brands:
- RIDEX
- STARK
- FEBI BILSTEIN
- ABE
- RIDEX PLUS
Sensor ABS SEAT Arosa (6H): how much does this product cost?
The price of car parts within the category ABS wheel speed sensor SEAT Arosa (6H) ranges from £3.00 to £30.00, depending on the manufacturer and product specifications.
faq
DIY repair is only possible if the ABS malfunction is caused by faulty wheel speed sensors. Due to their location, they are highly exposed to moisture and dirt and therefore often fail. In some cases, it is enough to clean the sensitive element with a dry soft lint-free cloth. If this doesn’t work, replace the component.
If a malfunction of the anti-lock braking system is caused by a failure of the electronic control unit or a hydraulic unit, you will need professional assistance. Visit a car repair shop.
First, inspect the component. Cracks on its housing, torn and oxidised wires, and a damaged connector indicate a malfunction.
Use a multimeter for thorough diagnostics. Before you start testing the component, check how the wheel speed sensors are installed in your car. You can find this information in the vehicle repair manual.
You will need to raise the car and most likely to remove the wheel in order to access the part. Next, disconnect the wire from the ABS control unit. Connect the multimeter probes to the sensor contacts and measure resistance. Compare the received values with nominal data – they are usually specified in the car owner’s manual. As a rule, these values vary within the range of 0,5–2,0 kiloohms.
The next step of testing is measuring the voltage on the sensor contacts. To do this, rotate the wheel with your hand at a frequency of about 1 cycle per second. With this frequency, the voltage should be 0,25–0,50 V.
This procedure is determined by the vehicle make and model. Typically, the steps are the following:
- Engage the parking brake and secure the axle opposite to the one on which you’re going to replace the component with wheel chocks. Raise the car.
- Remove the wheel.
- Unscrew the fasteners of the brake caliper, pull it aside and secure with a wire.
- Remove the brake pads and a disc.
- Unscrew the sensor fastening bolt and remove the component from its mounting seat.
- Disconnect the wire from the ABS control unit and car body.
- Install a new part by following all steps in reverse order.
Confidence in online shopping! You can return Seat Arosa 6h abs sensor without explanation within 200 days after purchase and get your money back. How? Just use the Safe Order service at the checkout page. The service cost is only £3.95.
Each order from £2,000.00 value of goods, include free shipping within Great Britain.
*Does not apply to large-size auto parts.
*Except/excluding areas with the following postcodes: GY#####, JE#####, IM#####
