ABS sensor TRW SEAT TOLEDO
TRW ABS sensor
SEAT TOLEDO catalogue online
TRW Wheel speed sensor Top SEAT TOLEDO Models
Sensor ABS SEAT TOLEDO in brand quality: Top Manufacturers
Have you ever bought TRW products from AUTODOC and do you want to share your experience? Help others make the best choice. Leave your feedback and recommendations
TRW ABS wheel speed sensor SEAT TOLEDO of brand quality in our amazing selection
We offer TRW brand produts in OEM quality. Find the right branded ABS sensor spare part your SEAT TOLEDO car in our catagory.
TRW GBS2503 ABS sensor
with accessories, Passive sensor, 73mm
Sold by AUTODOC
TRW GBS2516 ABS sensor
with accessories, Active sensor, 66mm
Sold by AUTODOC
TRW GBS2513 ABS sensor
with accessories, Active sensor, 62mm
Sold by AUTODOC
TRW GBS2514 ABS sensor
with accessories, Active sensor, 62mm
Sold by AUTODOC
TRW GBS2529 ABS sensor
with accessories, Active sensor, 62mm
Sold by AUTODOC
TRW GBS2515 ABS sensor
with accessories, Active sensor, 66mm
Sold by AUTODOC
TRW GBS2528 ABS sensor
with accessories, Active sensor, 62mm
Sold by AUTODOC
TRW GBS2500 ABS sensor
with accessories, Passive sensor, 68mm
Sold by AUTODOC
TRW GBS2518 ABS sensor
with accessories, Active sensor, 77mm
Sold by AUTODOC
TRW GBS2501 ABS sensor
with accessories, Passive sensor, 68mm
Sold by AUTODOC
TRW GBS2517 ABS sensor
with accessories, Active sensor, 77mm
Sold by AUTODOC
TRW GBS2527 ABS sensor
with accessories, Passive sensor, 1135mm
Sold by AUTODOC
TRW GBS2933 ABS sensor
Active sensor, 62mm, oval
Sold by AUTODOC
TRW GBS2831 ABS sensor
Active sensor, 62mm, oval
Sold by AUTODOC
TRW GBS2829 ABS sensor
Active sensor, 85mm
Sold by AUTODOC
TRW abs sensor for SEAT TOLEDO: top must-read articles
TRW ABS sensor: What is the price of this product for the SEAT TOLEDO?
The price of TRW products in the category ABS sensor for the SEAT TOLEDO ranges from £17.00 to £42.00, depending on the features and specifications.
FAQ
DIY repair is only possible if the ABS malfunction is caused by faulty wheel speed sensors. Due to their location, they are highly exposed to moisture and dirt and therefore often fail. In some cases, it is enough to clean the sensitive element with a dry soft lint-free cloth. If this doesn’t work, replace the component.
If a malfunction of the anti-lock braking system is caused by a failure of the electronic control unit or a hydraulic unit, you will need professional assistance. Visit a car repair shop.
First, inspect the component. Cracks on its housing, torn and oxidised wires, and a damaged connector indicate a malfunction.
Use a multimeter for thorough diagnostics. Before you start testing the component, check how the wheel speed sensors are installed in your car. You can find this information in the vehicle repair manual.
You will need to raise the car and most likely to remove the wheel in order to access the part. Next, disconnect the wire from the ABS control unit. Connect the multimeter probes to the sensor contacts and measure resistance. Compare the received values with nominal data – they are usually specified in the car owner’s manual. As a rule, these values vary within the range of 0,5–2,0 kiloohms.
The next step of testing is measuring the voltage on the sensor contacts. To do this, rotate the wheel with your hand at a frequency of about 1 cycle per second. With this frequency, the voltage should be 0,25–0,50 V.
This procedure is determined by the vehicle make and model. Typically, the steps are the following:
- Engage the parking brake and secure the axle opposite to the one on which you’re going to replace the component with wheel chocks. Raise the car.
- Remove the wheel.
- Unscrew the fasteners of the brake caliper, pull it aside and secure with a wire.
- Remove the brake pads and a disc.
- Unscrew the sensor fastening bolt and remove the component from its mounting seat.
- Disconnect the wire from the ABS control unit and car body.
- Install a new part by following all steps in reverse order.
Confidence in online shopping! You can return TRW abs sensor for SEAT TOLEDO without explanation within 200 days after purchase and get your money back. How? Just use the Safe Order service at the checkout page. The service cost is only £3.95.
Each order from £2,000.00 value of goods, include free shipping within Great Britain.
*Does not apply to large-size auto parts.
*Except/excluding areas with the following postcodes: GY#####, JE#####, IM#####
