ABS sensor MAXGEAR SKODA FABIA
MAXGEAR ABS sensor
SKODA FABIA catalogue online
MAXGEAR Wheel speed sensor Top SKODA FABIA Models
Sensor ABS SKODA FABIA in brand quality: Top Manufacturers
Have you ever bought MAXGEAR products from AUTODOC and do you want to share your experience? Help others make the best choice. Leave your feedback and recommendations
MAXGEAR ABS wheel speed sensor SKODA FABIA of brand quality in our amazing selection
We offer MAXGEAR brand produts in OEM quality. Find the right branded ABS sensor spare part your SKODA FABIA car in our catagory.
MAXGEAR 6Q0927807B/MG ABS sensor
Rear Axle, Rear Axle Left, Active sensor, Hall Sensor
Sold by AUTODOC
MAXGEAR 6Q0927804B/MG ABS sensor
Front Axle Right, Front Axle, Active sensor
Sold by AUTODOC
MAXGEAR 6Q0927803B/MG ABS sensor
Front Axle Left, Front Axle, Active sensor
Sold by AUTODOC
MAXGEAR 6Q0927808B/MG ABS sensor
Rear Axle, Rear Axle Right, Active sensor, Hall Sensor
Sold by AUTODOC
MAXGEAR 7H0927804/MG ABS sensor
Front Axle Right, without cable, Active sensor, 66mm
Sold by AUTODOC
MAXGEAR 2K0927807/MG ABS sensor
Rear Axle, without cable, Active sensor, 75mm
Sold by AUTODOC
MAXGEAR 7L0927808A/MG ABS sensor
Rear Axle Right, Front Axle Right, Active sensor
Sold by AUTODOC
MAXGEAR 7L0927807A/MG ABS sensor
Rear Axle Left, Front Axle Left, Active sensor
Sold by AUTODOC
MAXGEAR 1K0927808/MG ABS sensor
Rear Axle Right, without cable, Active sensor, 77mm
Sold by AUTODOC
MAXGEAR 8D0927803D/MG ABS sensor
Front Axle, Passive sensor, 965mm
Sold by AUTODOC
MAXGEAR 1K0927807/MG ABS sensor
Rear Axle Left, without cable, Active sensor, 77mm
Sold by AUTODOC
MAXGEAR 20-0436 ABS sensor
Rear Axle Left, with cable, 1056mm
Sold by AUTODOC
MAXGEAR 1J0927807D/MG ABS sensor
Rear Axle, with cable, Passive sensor, 290mm
Sold by AUTODOC
MAXGEAR 3B0927807B/MG ABS sensor
Rear Axle, Rear Axle both sides, Passive sensor, 1070, 1005mm
Sold by AUTODOC
MAXGEAR 20-0405 ABS sensor
Rear Axle, 2-pin connector, 75mm
Sold by AUTODOC
MAXGEAR abs sensor for SKODA FABIA: top must-read articles
MAXGEAR ABS sensor: What is the price of this product for the SKODA FABIA?
The price of MAXGEAR products in the category ABS sensor for the SKODA FABIA ranges from £13.00 to £31.00, depending on the features and specifications.
faq
DIY repair is only possible if the ABS malfunction is caused by faulty wheel speed sensors. Due to their location, they are highly exposed to moisture and dirt and therefore often fail. In some cases, it is enough to clean the sensitive element with a dry soft lint-free cloth. If this doesn’t work, replace the component.
If a malfunction of the anti-lock braking system is caused by a failure of the electronic control unit or a hydraulic unit, you will need professional assistance. Visit a car repair shop.
First, inspect the component. Cracks on its housing, torn and oxidised wires, and a damaged connector indicate a malfunction.
Use a multimeter for thorough diagnostics. Before you start testing the component, check how the wheel speed sensors are installed in your car. You can find this information in the vehicle repair manual.
You will need to raise the car and most likely to remove the wheel in order to access the part. Next, disconnect the wire from the ABS control unit. Connect the multimeter probes to the sensor contacts and measure resistance. Compare the received values with nominal data – they are usually specified in the car owner’s manual. As a rule, these values vary within the range of 0,5–2,0 kiloohms.
The next step of testing is measuring the voltage on the sensor contacts. To do this, rotate the wheel with your hand at a frequency of about 1 cycle per second. With this frequency, the voltage should be 0,25–0,50 V.
This procedure is determined by the vehicle make and model. Typically, the steps are the following:
- Engage the parking brake and secure the axle opposite to the one on which you’re going to replace the component with wheel chocks. Raise the car.
- Remove the wheel.
- Unscrew the fasteners of the brake caliper, pull it aside and secure with a wire.
- Remove the brake pads and a disc.
- Unscrew the sensor fastening bolt and remove the component from its mounting seat.
- Disconnect the wire from the ABS control unit and car body.
- Install a new part by following all steps in reverse order.
Confidence in online shopping! You can return MAXGEAR abs sensor for SKODA FABIA without explanation within 200 days after purchase and get your money back. How? Just use the Safe Order service at the checkout page. The service cost is only £3.95.
Each order from £2,000.00 value of goods, include free shipping within Great Britain.
*Does not apply to large-size auto parts.
*Except/excluding areas with the following postcodes: GY#####, JE#####, IM#####
