ABS sensor ABAKUS SKODA ROOMSTER
ABAKUS ABS sensor
SKODA ROOMSTER catalogue online
ABAKUS Wheel speed sensor Top SKODA ROOMSTER Models
Sensor ABS SKODA ROOMSTER in brand quality: Top Manufacturers
Have you ever bought ABAKUS products from AUTODOC and do you want to share your experience? Help others make the best choice. Leave your feedback and recommendations
ABAKUS ABS wheel speed sensor SKODA ROOMSTER of brand quality in our amazing selection
We offer ABAKUS brand produts in OEM quality. Find the right branded ABS sensor spare part your SKODA ROOMSTER car in our catagory.
ABAKUS 120-02-035 ABS sensor
Front Axle Left, without cable, Hall Sensor, 2-pin connector
Sold by AUTODOC
ABAKUS 120-02-157 ABS sensor
Right, Hall Sensor, 2-pin connector
Sold by AUTODOC
ABAKUS 120-03-028 ABS sensor
Rear Axle Left, Hall Sensor, 2-pin connector
Sold by AUTODOC
ABAKUS 120-03-133 ABS sensor
Rear Axle Right, without cable, Hall Sensor, 2-pin connector
Sold by AUTODOC
ABAKUS 120-02-036 ABS sensor
Front Axle Left, without cable, Hall Sensor, 2-pin connector
Sold by AUTODOC
ABAKUS 120-03-131 ABS sensor
Rear Axle Right, Hall Sensor, 2-pin connector
Sold by AUTODOC
ABAKUS 120-02-160 ABS sensor
Front Axle Left, Rear Axle Left, Hall Sensor, 2-pin connector
Sold by AUTODOC
ABAKUS 120-03-094 ABS sensor
Rear Axle, Passive sensor, 2-pin connector
Sold by AUTODOC
ABAKUS 120-02-165 ABS sensor
Front Axle Right, Rear Axle Right, Hall Sensor, 2-pin connector
Sold by AUTODOC
ABAKUS 120-02-124 ABS sensor
Front Axle, Inductive Sensor, 2-pin connector, 1025mm
Sold by AUTODOC
ABAKUS 120-03-100 ABS sensor
Rear Axle, Inductive Sensor, 2-pin connector, 240mm
Sold by AUTODOC
ABAKUS 120-02-039 ABS sensor
Front Axle, Inductive Sensor, 2-pin connector, 1025mm
Sold by AUTODOC
ABAKUS 120-02-156 ABS sensor
Front Axle Right, Inductive Sensor, 2-pin connector
Sold by AUTODOC
ABAKUS 120-03-104 ABS sensor
Rear Axle, 2-pin connector, 1300 Ohm, 1060mm
Sold by AUTODOC
ABAKUS 120-03-024 ABS sensor
Rear Axle Left, without cable, Hall Sensor, 2-pin connector
Sold by AUTODOC
ABAKUS abs sensor for SKODA ROOMSTER: top must-read articles
ABAKUS ABS sensor: What is the price of this product for the SKODA ROOMSTER?
The price of ABAKUS products in the category ABS sensor for the SKODA ROOMSTER ranges from £5.00 to £11.00, depending on the features and specifications.
FAQ
DIY repair is only possible if the ABS malfunction is caused by faulty wheel speed sensors. Due to their location, they are highly exposed to moisture and dirt and therefore often fail. In some cases, it is enough to clean the sensitive element with a dry soft lint-free cloth. If this doesn’t work, replace the component.
If a malfunction of the anti-lock braking system is caused by a failure of the electronic control unit or a hydraulic unit, you will need professional assistance. Visit a car repair shop.
First, inspect the component. Cracks on its housing, torn and oxidised wires, and a damaged connector indicate a malfunction.
Use a multimeter for thorough diagnostics. Before you start testing the component, check how the wheel speed sensors are installed in your car. You can find this information in the vehicle repair manual.
You will need to raise the car and most likely to remove the wheel in order to access the part. Next, disconnect the wire from the ABS control unit. Connect the multimeter probes to the sensor contacts and measure resistance. Compare the received values with nominal data – they are usually specified in the car owner’s manual. As a rule, these values vary within the range of 0,5–2,0 kiloohms.
The next step of testing is measuring the voltage on the sensor contacts. To do this, rotate the wheel with your hand at a frequency of about 1 cycle per second. With this frequency, the voltage should be 0,25–0,50 V.
This procedure is determined by the vehicle make and model. Typically, the steps are the following:
- Engage the parking brake and secure the axle opposite to the one on which you’re going to replace the component with wheel chocks. Raise the car.
- Remove the wheel.
- Unscrew the fasteners of the brake caliper, pull it aside and secure with a wire.
- Remove the brake pads and a disc.
- Unscrew the sensor fastening bolt and remove the component from its mounting seat.
- Disconnect the wire from the ABS control unit and car body.
- Install a new part by following all steps in reverse order.
Confidence in online shopping! You can return ABAKUS abs sensor for SKODA ROOMSTER without explanation within 200 days after purchase and get your money back. How? Just use the Safe Order service at the checkout page. The service cost is only £3.95.
Each order from £2,000.00 value of goods, include free shipping within Great Britain.
*Does not apply to large-size auto parts.
*Except/excluding areas with the following postcodes: GY#####, JE#####, IM#####
