Subaru Tribeca B9 abs sensor
Where to buy Subaru Tribeca B9 abs sensor at a good price? At AUTODOC!
AUTODOC Bestsellers: buy online at a good price to reduce Subaru Tribeca B9 abs sensor replacement costs
Best selling replacement part: ABS sensor SUBARU TRIBECA. You have the choice between various ABS wheel speed sensor SUBARU B9 TRIBECA brand manufacturers or to buy another high quality car part
RIDEX 412W0893 ABS sensor
Front Axle Right, 800mm, grey
Sold by AUTODOC
RIDEX 412W0850 ABS sensor
Rear Axle Right, Active sensor, 2-pin connector, 620mm
Sold by AUTODOC
RIDEX 412W0851 ABS sensor
Rear Axle Right, Active sensor, 2-pin connector, 620mm
Sold by AUTODOC
A.B.S. 30175 ABS sensor
Active sensor, 765mm, 840mm, 36mm, grey
Sold by AUTODOC
GH GH-704400 ABS sensor
Front Axle, Front Axle Right, Front Axle Left
Sold by AUTODOC
GH GH-714401 ABS sensor
Rear Axle, Rear Axle Right, Rear Axle Left
Sold by AUTODOC
JPN 75E9492-JPN ABS sensor
Front Axle, Active sensor, 910mm, grey
Sold by AUTODOC
JPN 75E9491-JPN ABS sensor
Rear Axle, Active sensor, 810mm, grey
Sold by AUTODOC
A.B.S. 30178 ABS sensor
Active sensor, 880mm, 955mm, 36mm, grey
Sold by AUTODOC
BOSCH DF11 ABS sensor
Sold by AUTODOC
A.B.S. 31932 ABS sensor
Passive sensor, 800mm, 895mm, 43mm, white
Sold by AUTODOC
FAST FT80862 ABS sensor
Rear Axle, with fastening/mounting material, with synthetic grease, 2-pin connector, 2070mm, 2120mm, 24V
Sold by AUTODOC
A.B.S. 31941 ABS sensor
Passive sensor, 825mm, 880mm, 23mm, grey
Sold by AUTODOC
METZGER 0900361 ABS sensor ring
Number of Teeth: 43, Front Axle Left, Front Axle Right
Sold by AUTODOC
A.B.S. 31955 ABS sensor
Active sensor, 775mm, 845mm, 35mm, grey
Sold by AUTODOC
A.B.S. 31491 ABS sensor
Active sensor, 800mm, 875mm, 36mm, grey
Sold by AUTODOC
METZGER 09001416 ABS sensor
Sold by AUTODOC
Alfa e-Parts AF00857 ABS sensor
Rear Axle Left, Hall Sensor, 2-pin connector, 550mm, black, black, PA 66 GF 30
Sold by AUTODOC
A.B.S. 31487 ABS sensor
Passive sensor, 865mm, 925mm, 23mm, brown
Sold by AUTODOC
A.B.S. 32047 ABS sensor
Active sensor, 540mm, 625mm, 36mm, grey
Sold by AUTODOC
Wheel speed sensor SUBARU Tribeca (B9) car models
The most read articles on the topic abs sensor for Subaru Tribeca B9
ABS sensor Subaru Tribeca B9: which brand is better?
According to our customers, the best spare parts in the product category Anti lock brake sensor (ABS) SUBARU TRIBECA come from the following brands:
- RIDEX
- STARK
- FEBI BILSTEIN
- ABE
- RIDEX PLUS
Sensor ABS SUBARU Tribeca (B9): how much does this product cost?
The price of car parts within the category ABS wheel speed sensor SUBARU Tribeca (B9) ranges from £10.00 to £61.00, depending on the manufacturer and product specifications.
faq
DIY repair is only possible if the ABS malfunction is caused by faulty wheel speed sensors. Due to their location, they are highly exposed to moisture and dirt and therefore often fail. In some cases, it is enough to clean the sensitive element with a dry soft lint-free cloth. If this doesn’t work, replace the component.
If a malfunction of the anti-lock braking system is caused by a failure of the electronic control unit or a hydraulic unit, you will need professional assistance. Visit a car repair shop.
First, inspect the component. Cracks on its housing, torn and oxidised wires, and a damaged connector indicate a malfunction.
Use a multimeter for thorough diagnostics. Before you start testing the component, check how the wheel speed sensors are installed in your car. You can find this information in the vehicle repair manual.
You will need to raise the car and most likely to remove the wheel in order to access the part. Next, disconnect the wire from the ABS control unit. Connect the multimeter probes to the sensor contacts and measure resistance. Compare the received values with nominal data – they are usually specified in the car owner’s manual. As a rule, these values vary within the range of 0,5–2,0 kiloohms.
The next step of testing is measuring the voltage on the sensor contacts. To do this, rotate the wheel with your hand at a frequency of about 1 cycle per second. With this frequency, the voltage should be 0,25–0,50 V.
This procedure is determined by the vehicle make and model. Typically, the steps are the following:
- Engage the parking brake and secure the axle opposite to the one on which you’re going to replace the component with wheel chocks. Raise the car.
- Remove the wheel.
- Unscrew the fasteners of the brake caliper, pull it aside and secure with a wire.
- Remove the brake pads and a disc.
- Unscrew the sensor fastening bolt and remove the component from its mounting seat.
- Disconnect the wire from the ABS control unit and car body.
- Install a new part by following all steps in reverse order.
Confidence in online shopping! You can return Subaru Tribeca B9 abs sensor without explanation within 200 days after purchase and get your money back. How? Just use the Safe Order service at the checkout page. The service cost is only £3.95.
Each order from £2,000.00 value of goods, include free shipping within Great Britain.
*Does not apply to large-size auto parts.
*Except/excluding areas with the following postcodes: GY#####, JE#####, IM#####
