TOYOTA PREMIO abs sensor
Where to buy TOYOTA PREMIO abs sensor at a good price? At AUTODOC!
AUTODOC Bestsellers: buy online at a good price to reduce TOYOTA PREMIO abs sensor replacement costs
The best selling ABS sensor replacement parts TOYOTA PREMIO are available for your in original quality from our ABS wheel speed sensor catagory.
RIDEX 2254S0036 ABS sensor ring
Front Axle
Sold by AUTODOC
RIDEX 412W0183 ABS sensor
Front Axle Right, Rear Axle Right, without cable, Active sensor, 2-pin connector, oval
Sold by AUTODOC
RIDEX 412W1259 ABS sensor
Rear Axle, 915mm
Sold by AUTODOC
RIDEX 412W0396 ABS sensor
Rear Axle, for vehicles with ABS, 12V
Sold by AUTODOC
RIDEX 412W1447 ABS sensor
Front axle both sides, Active sensor, 2-pin connector, 820mm, 28mm, oval
Sold by AUTODOC
RIDEX 412W0194 ABS sensor
Front axle both sides, Active sensor, 880mm
Sold by AUTODOC
BLUE PRINT ADT37135 ABS sensor
Rear Axle Left, Rear Axle Right
Sold by AUTODOC
A.B.S. 31173 ABS sensor
Active sensor, 49mm, 24mm, black
Sold by AUTODOC
VEMO 1037747 ABS sensor
Rear Axle, Original VEMO Quality, for vehicles with ABS, 12V
Sold by AUTODOC
BREMI 51022 ABS sensor
without cable
Sold by AUTODOC
HELLA 6PU 230 040-341 ABS sensor
Rear Axle, Hall Sensor, 2-pin connector
Sold by AUTODOC
A.B.S. 30869 ABS sensor
880mm, 920mm
Sold by AUTODOC
A.B.S. 31038 ABS sensor
Passive sensor, 840mm, 920mm, 17mm, grey
Sold by AUTODOC
RIDEX PLUS 412W0131P ABS sensor
Front axle both sides, Active sensor, 2-pin connector, 760mm, 850mm, 28mm, oval
Sold by AUTODOC
VEMO 1011285 ABS sensor ring
Front axle both sides, Original VEMO Quality
Sold by AUTODOC
ABAKUS 120-02-153 ABS sensor
Front Axle Right, Passive sensor, 2-pin connector, 1005mm
Sold by AUTODOC
A.B.S. 30165 ABS sensor for TOYOTA PREMIO
Active sensor, 66mm, 32mm, black
Sold by AUTODOC
A.B.S. 31753 ABS sensor for TOYOTA PREMIO
Active sensor, 850mm, 925mm, 28mm, white
Sold by AUTODOC
HITACHI 131705 ABS sensor for TOYOTA PREMIO
Front Axle, Original Spare Part
Sold by AUTODOC
FEBI BILSTEIN 34778 ABS sensor for TOYOTA PREMIO
Front Axle Left, Front Axle Right, 740mm
Sold by AUTODOC
ABS sensor TOYOTA PREMIO in brand quality: Top Manufacturers
Sensor ABS for Top TOYOTA PREMIO Models
AUTODOC tips and tricks to TOYOTA PREMIO Wheel speed sensor
Wheel speed sensor Toyota PREMIO: which brand is better?
According to our customers, the best spare parts in the product category Sensor ABS Toyota PREMIO come from the following brands:
- VEMO
- A.B.S.
ABS wheel speed sensor Toyota PREMIO: how much does this product cost?
The price of car parts within the category ABS sensor TOYOTA PREMIO ranges from £4.00 to £38.00, depending on the manufacturer and product specifications.
FAQ
DIY repair is only possible if the ABS malfunction is caused by faulty wheel speed sensors. Due to their location, they are highly exposed to moisture and dirt and therefore often fail. In some cases, it is enough to clean the sensitive element with a dry soft lint-free cloth. If this doesn’t work, replace the component.
If a malfunction of the anti-lock braking system is caused by a failure of the electronic control unit or a hydraulic unit, you will need professional assistance. Visit a car repair shop.
First, inspect the component. Cracks on its housing, torn and oxidised wires, and a damaged connector indicate a malfunction.
Use a multimeter for thorough diagnostics. Before you start testing the component, check how the wheel speed sensors are installed in your car. You can find this information in the vehicle repair manual.
You will need to raise the car and most likely to remove the wheel in order to access the part. Next, disconnect the wire from the ABS control unit. Connect the multimeter probes to the sensor contacts and measure resistance. Compare the received values with nominal data – they are usually specified in the car owner’s manual. As a rule, these values vary within the range of 0,5–2,0 kiloohms.
The next step of testing is measuring the voltage on the sensor contacts. To do this, rotate the wheel with your hand at a frequency of about 1 cycle per second. With this frequency, the voltage should be 0,25–0,50 V.
This procedure is determined by the vehicle make and model. Typically, the steps are the following:
- Engage the parking brake and secure the axle opposite to the one on which you’re going to replace the component with wheel chocks. Raise the car.
- Remove the wheel.
- Unscrew the fasteners of the brake caliper, pull it aside and secure with a wire.
- Remove the brake pads and a disc.
- Unscrew the sensor fastening bolt and remove the component from its mounting seat.
- Disconnect the wire from the ABS control unit and car body.
- Install a new part by following all steps in reverse order.
Confidence in online shopping! You can return TOYOTA PREMIO abs sensor without explanation within 200 days after purchase and get your money back. How? Just use the Safe Order service at the checkout page. The service cost is only £3.95.
Each order from £2,000.00 value of goods, include free shipping within Great Britain.
*Does not apply to large-size auto parts.
*Except/excluding areas with the following postcodes: GY#####, JE#####, IM#####
