Abs sensor TRISCAN AUDI 200
AUDI 200: TRISCAN Abs sensor
TRISCAN Wheel speed sensor: parts for popular AUDI 200 variants
Sensor ABS AUDI 200: original-quality parts from top brands
Have you ever bought TRISCAN products from AUTODOC and do you want to share your experience? Help others make the best choice. Leave your feedback and recommendations
TRISCAN ABS wheel speed sensor AUDI 200 – high-quality parts from reputable brands
We offer TRISCAN brand produts in OEM quality. Find the right branded Abs sensor spare part your AUDI 200 car in our catagory.
TRISCAN 8540 29406 ABS sensor ring
TRISCAN 8540 29404 ABS sensor ring
TRISCAN 8540 29403 ABS sensor ring
TRISCAN 8540 29412 ABS sensor ring
with integrated magnetic sensor ring
TRISCAN 8540 29409 ABS sensor ring
with integrated magnetic sensor ring
TRISCAN 8180 29102 ABS sensor
2-pin connector, 27,7mm
TRISCAN 8180 29203 ABS sensor
2-pin connector, 39,9mm
TRISCAN 8540 29401 ABS sensor ring
TRISCAN 8180 29215 ABS sensor
2-pin connector, 37,8mm
TRISCAN 8180 29205 ABS sensor
2-pin connector, 23,6mm
TRISCAN 8180 29351 ABS sensor
2-pin connector, 39,7mm
TRISCAN 8180 29206 ABS sensor
2-pin connector, 23,6mm
TRISCAN 8180 29105 ABS sensor
2-pin connector, 21mm
TRISCAN 8180 29109 ABS sensor
2-pin connector, 37,3mm
TRISCAN 8180 29106 ABS sensor
2-pin connector, 21,1mm
TRISCAN Abs sensor: What is the price of this product for the AUDI 200?
The price of TRISCAN products in the category Abs sensor for the AUDI 200 ranges from £8,00 to £24,00, depending on the features and specifications.
faq
DIY repair is only possible if the ABS malfunction is caused by faulty wheel speed sensors. Due to their location, they are highly exposed to moisture and dirt and therefore often fail. In some cases, it is enough to clean the sensitive element with a dry soft lint-free cloth. If this doesn’t work, replace the component.
If a malfunction of the anti-lock braking system is caused by a failure of the electronic control unit or a hydraulic unit, you will need professional assistance. Visit a car repair shop.
First, inspect the component. Cracks on its housing, torn and oxidised wires, and a damaged connector indicate a malfunction.
Use a multimeter for thorough diagnostics. Before you start testing the component, check how the wheel speed sensors are installed in your car. You can find this information in the vehicle repair manual.
You will need to raise the car and most likely to remove the wheel in order to access the part. Next, disconnect the wire from the ABS control unit. Connect the multimeter probes to the sensor contacts and measure resistance. Compare the received values with nominal data – they are usually specified in the car owner’s manual. As a rule, these values vary within the range of 0,5–2,0 kiloohms.
The next step of testing is measuring the voltage on the sensor contacts. To do this, rotate the wheel with your hand at a frequency of about 1 cycle per second. With this frequency, the voltage should be 0,25–0,50 V.
This procedure is determined by the vehicle make and model. Typically, the steps are the following:
- Engage the parking brake and secure the axle opposite to the one on which you’re going to replace the component with wheel chocks. Raise the car.
- Remove the wheel.
- Unscrew the fasteners of the brake caliper, pull it aside and secure with a wire.
- Remove the brake pads and a disc.
- Unscrew the sensor fastening bolt and remove the component from its mounting seat.
- Disconnect the wire from the ABS control unit and car body.
- Install a new part by following all steps in reverse order.
Confidence in online shopping! You can return TRISCAN abs sensor for AUDI 200 without explanation within 200 days after purchase and get your money back. How? Just use the Safe Order service on the checkout page. The service cost is only 2,99 €.
Each order from 120,00 € value of goods, include free shipping within Germany.
*Does not apply to large-size auto parts.
