Abs sensor HELLA BMW X1
BMW X1: HELLA Abs sensor
HELLA Wheel speed sensor: parts for popular BMW X1 variants
Sensor ABS BMW X1: original-quality parts from top brands
Have you ever bought HELLA products from AUTODOC and do you want to share your experience? Help others make the best choice. Leave your feedback and recommendations
HELLA ABS wheel speed sensor BMW X1 – high-quality parts from reputable brands
We offer HELLA brand produts in OEM quality. Find the right branded Abs sensor spare part your BMW X1 car in our catagory.
HELLA 6PU 012 679-531 ABS sensor
Rear Axle, Active sensor, 2-pin connector, 992mm
HELLA 6PU 012 679-441 ABS sensor
Front Axle, Active sensor, 2-pin connector, 630mm
HELLA 6PU 012 679-541 ABS sensor
Rear Axle, Active sensor, 2-pin connector, 510mm
HELLA 6PU 358 216-541 ABS sensor
Front Axle, Hall Sensor, 2-pin connector, 698mm
HELLA 6PU 358 216-551 ABS sensor
Rear Axle, Hall Sensor, 2-pin connector, 567mm
HELLA 6PU 012 039-751 ABS sensor
Hall Sensor, 2-pin connector, 871mm, 12V
HELLA 6PU 230 048-181 ABS sensor
Hall Sensor, 2-pin connector, 960mm
HELLA 066025 ABS sensor
Front Axle, Hall Sensor, 2-pin connector, 610mm, 12V
HELLA 6PU 012 039-861 ABS sensor
Front Axle Left, Front Axle Right, Active sensor, 2-pin connector, 950mm
HELLA 6PU 012 039-051 ABS sensor
Front Axle, 2-pin connector, 585mm, 12V
HELLA 6PU 009 106-921 ABS sensor
Rear Axle, Hall Sensor, 2-pin connector, 889mm, 12V
HELLA 6PU 012 806-381 ABS sensor
Rear Axle, Active sensor, 2-pin connector, 985mm
HELLA 6PU 010 039-761 ABS sensor
Rear Axle, 2-pin connector, 970mm, 12V
HELLA 6PU 012 039-761 ABS sensor
Front Axle, Hall Sensor, 2-pin connector, 858mm, 12V
HELLA 6PU 010 039-491 ABS sensor
Rear Axle, Inductive Sensor, 2-pin connector, 1110 Ohm, 958mm, 12V
HELLA Abs sensor: What is the price of this product for the BMW X1?
The price of HELLA products in the category Abs sensor for the BMW X1 ranges from £20,00 to £44,00, depending on the features and specifications.
faq
DIY repair is only possible if the ABS malfunction is caused by faulty wheel speed sensors. Due to their location, they are highly exposed to moisture and dirt and therefore often fail. In some cases, it is enough to clean the sensitive element with a dry soft lint-free cloth. If this doesn’t work, replace the component.
If a malfunction of the anti-lock braking system is caused by a failure of the electronic control unit or a hydraulic unit, you will need professional assistance. Visit a car repair shop.
First, inspect the component. Cracks on its housing, torn and oxidised wires, and a damaged connector indicate a malfunction.
Use a multimeter for thorough diagnostics. Before you start testing the component, check how the wheel speed sensors are installed in your car. You can find this information in the vehicle repair manual.
You will need to raise the car and most likely to remove the wheel in order to access the part. Next, disconnect the wire from the ABS control unit. Connect the multimeter probes to the sensor contacts and measure resistance. Compare the received values with nominal data – they are usually specified in the car owner’s manual. As a rule, these values vary within the range of 0,5–2,0 kiloohms.
The next step of testing is measuring the voltage on the sensor contacts. To do this, rotate the wheel with your hand at a frequency of about 1 cycle per second. With this frequency, the voltage should be 0,25–0,50 V.
This procedure is determined by the vehicle make and model. Typically, the steps are the following:
- Engage the parking brake and secure the axle opposite to the one on which you’re going to replace the component with wheel chocks. Raise the car.
- Remove the wheel.
- Unscrew the fasteners of the brake caliper, pull it aside and secure with a wire.
- Remove the brake pads and a disc.
- Unscrew the sensor fastening bolt and remove the component from its mounting seat.
- Disconnect the wire from the ABS control unit and car body.
- Install a new part by following all steps in reverse order.
Confidence in online shopping! You can return HELLA abs sensor for BMW X1 without explanation within 200 days after purchase and get your money back. How? Just use the Safe Order service on the checkout page. The service cost is only 2,99 €.
Each order from 120,00 € value of goods, include free shipping within Germany.
*Does not apply to large-size auto parts.
