Abs sensor MAPCO CITROËN RELAY
CITROËN RELAY: MAPCO Abs sensor
MAPCO Wheel speed sensor: parts for popular CITROËN RELAY variants
Sensor ABS CITROËN RELAY: original-quality parts from top brands
Have you ever bought MAPCO products from AUTODOC and do you want to share your experience? Help others make the best choice. Leave your feedback and recommendations
MAPCO ABS wheel speed sensor CITROËN RELAY – high-quality parts from reputable brands
We offer MAPCO brand produts in OEM quality. Find the right branded Abs sensor spare part your CITROËN RELAY car in our catagory.
MAPCO 76012 ABS sensor ring
Number of Teeth: 54, Front axle both sides
MAPCO 76010 ABS sensor ring
Number of Teeth: 54, Front axle both sides
MAPCO 76013 ABS sensor ring
Number of Teeth: 54, Front axle both sides
MAPCO 76011 ABS sensor ring
Number of Teeth: 54, Front axle both sides
MAPCO 76014 ABS sensor ring
with integrated magnetic sensor ring, Rear Axle both sides
MAPCO 76362 ABS sensor ring
with integrated magnetic sensor ring, Rear Axle both sides
MAPCO 76916 ABS sensor ring
Number of Teeth: 29, Front axle both sides
MAPCO 76358 ABS sensor ring
Number of Teeth: 48, Front axle both sides
MAPCO 76359 ABS sensor ring
with integrated magnetic sensor ring, Rear Axle both sides
MAPCO 76300 ABS sensor ring
Number of Teeth: 48, Front axle both sides
MAPCO 76339 ABS sensor ring
Number of Teeth: 29, Front axle both sides
MAPCO 76372 ABS sensor ring
Number of Teeth: 90, Front axle both sides
MAPCO 86407 ABS sensor
Front axle both sides, 950mm
MAPCO 86403 ABS sensor
Rear Axle both sides, 730mm
MAPCO 86401 ABS sensor
Rear Axle both sides
MAPCO Abs sensor: What is the price of this product for the CITROËN RELAY?
The price of MAPCO products in the category Abs sensor for the CITROËN RELAY ranges from £3,00 to £44,00, depending on the features and specifications.
faq
DIY repair is only possible if the ABS malfunction is caused by faulty wheel speed sensors. Due to their location, they are highly exposed to moisture and dirt and therefore often fail. In some cases, it is enough to clean the sensitive element with a dry soft lint-free cloth. If this doesn’t work, replace the component.
If a malfunction of the anti-lock braking system is caused by a failure of the electronic control unit or a hydraulic unit, you will need professional assistance. Visit a car repair shop.
First, inspect the component. Cracks on its housing, torn and oxidised wires, and a damaged connector indicate a malfunction.
Use a multimeter for thorough diagnostics. Before you start testing the component, check how the wheel speed sensors are installed in your car. You can find this information in the vehicle repair manual.
You will need to raise the car and most likely to remove the wheel in order to access the part. Next, disconnect the wire from the ABS control unit. Connect the multimeter probes to the sensor contacts and measure resistance. Compare the received values with nominal data – they are usually specified in the car owner’s manual. As a rule, these values vary within the range of 0,5–2,0 kiloohms.
The next step of testing is measuring the voltage on the sensor contacts. To do this, rotate the wheel with your hand at a frequency of about 1 cycle per second. With this frequency, the voltage should be 0,25–0,50 V.
This procedure is determined by the vehicle make and model. Typically, the steps are the following:
- Engage the parking brake and secure the axle opposite to the one on which you’re going to replace the component with wheel chocks. Raise the car.
- Remove the wheel.
- Unscrew the fasteners of the brake caliper, pull it aside and secure with a wire.
- Remove the brake pads and a disc.
- Unscrew the sensor fastening bolt and remove the component from its mounting seat.
- Disconnect the wire from the ABS control unit and car body.
- Install a new part by following all steps in reverse order.
Confidence in online shopping! You can return MAPCO abs sensor for CITROЁN RELAY without explanation within 200 days after purchase and get your money back. How? Just use the Safe Order service on the checkout page. The service cost is only 2,99 €.
Each order from 120,00 € value of goods, include free shipping within Germany.
*Does not apply to large-size auto parts.
