Abs sensor AUTLOG FIAT COUPE
FIAT COUPE: AUTLOG Abs sensor
AUTLOG Wheel speed sensor: parts for popular FIAT COUPE variants
Sensor ABS FIAT COUPE: original-quality parts from top brands
Have you ever bought AUTLOG products from AUTODOC and do you want to share your experience? Help others make the best choice. Leave your feedback and recommendations
AUTLOG ABS wheel speed sensor FIAT COUPE – high-quality parts from reputable brands
We offer AUTLOG brand produts in OEM quality. Find the right branded Abs sensor spare part your FIAT COUPE car in our catagory.
AUTLOG AS4773 ABS sensor
Front Axle Right
AUTLOG AS4775 ABS sensor
Front Axle, Hall Sensor, 1000mm
AUTLOG AS4771 ABS sensor
Rear Axle
AUTLOG AS4769 ABS sensor
Front Axle, Active sensor, 910mm
AUTLOG AS4551 ABS sensor
Rear Axle
AUTLOG AS4406 ABS sensor
Rear Axle, 1425mm
AUTLOG AS4378 ABS sensor
Front Axle, 742mm
AUTLOG AS4328 ABS sensor
Rear Axle
AUTLOG AS4317 ABS sensor
Rear Axle, 1030mm
AUTLOG AS4205 ABS sensor
Rear Axle Left, Rear Axle Right
AUTLOG AS4201 ABS sensor
Front Axle Right, 1265mm
AUTLOG AS4174 ABS sensor
Front Axle Right, 845mm
AUTLOG AS4173 ABS sensor
Front Axle Left, 845mm
AUTLOG AS4200 ABS sensor
Front Axle Left, 1280mm
AUTLOG AS4203 ABS sensor
Front Axle
AUTLOG Abs sensor: What is the price of this product for the FIAT COUPE?
The price of AUTLOG products in the category Abs sensor for the FIAT COUPE ranges from £20,00 to £33,00, depending on the features and specifications.
faq
DIY repair is only possible if the ABS malfunction is caused by faulty wheel speed sensors. Due to their location, they are highly exposed to moisture and dirt and therefore often fail. In some cases, it is enough to clean the sensitive element with a dry soft lint-free cloth. If this doesn’t work, replace the component.
If a malfunction of the anti-lock braking system is caused by a failure of the electronic control unit or a hydraulic unit, you will need professional assistance. Visit a car repair shop.
First, inspect the component. Cracks on its housing, torn and oxidised wires, and a damaged connector indicate a malfunction.
Use a multimeter for thorough diagnostics. Before you start testing the component, check how the wheel speed sensors are installed in your car. You can find this information in the vehicle repair manual.
You will need to raise the car and most likely to remove the wheel in order to access the part. Next, disconnect the wire from the ABS control unit. Connect the multimeter probes to the sensor contacts and measure resistance. Compare the received values with nominal data – they are usually specified in the car owner’s manual. As a rule, these values vary within the range of 0,5–2,0 kiloohms.
The next step of testing is measuring the voltage on the sensor contacts. To do this, rotate the wheel with your hand at a frequency of about 1 cycle per second. With this frequency, the voltage should be 0,25–0,50 V.
This procedure is determined by the vehicle make and model. Typically, the steps are the following:
- Engage the parking brake and secure the axle opposite to the one on which you’re going to replace the component with wheel chocks. Raise the car.
- Remove the wheel.
- Unscrew the fasteners of the brake caliper, pull it aside and secure with a wire.
- Remove the brake pads and a disc.
- Unscrew the sensor fastening bolt and remove the component from its mounting seat.
- Disconnect the wire from the ABS control unit and car body.
- Install a new part by following all steps in reverse order.
Confidence in online shopping! You can return AUTLOG abs sensor for FIAT COUPE without explanation within 200 days after purchase and get your money back. How? Just use the Safe Order service on the checkout page. The service cost is only 2,99 €.
Each order from 120,00 € value of goods, include free shipping within Germany.
*Does not apply to large-size auto parts.
