Abs sensor TRW FIAT PUNTO
FIAT PUNTO: TRW Abs sensor
TRW Wheel speed sensor: parts for popular FIAT PUNTO variants
Sensor ABS FIAT PUNTO: original-quality parts from top brands
Have you ever bought TRW products from AUTODOC and do you want to share your experience? Help others make the best choice. Leave your feedback and recommendations
TRW ABS wheel speed sensor FIAT PUNTO – high-quality parts from reputable brands
We offer TRW brand produts in OEM quality. Find the right branded Abs sensor spare part your FIAT PUNTO car in our catagory.
TRW GBS2554 ABS sensor
Active sensor, 854mm
TRW GBS2576 ABS sensor
Active sensor, 1755mm
TRW GBS2574 ABS sensor
Active sensor, 1785mm
TRW GBS2573 ABS sensor
Active sensor, 1130mm
TRW GBS2575 ABS sensor
Active sensor, 1545mm
TRW GBS2840 ABS sensor
Active sensor, 654mm
TRW GBS2095 ABS sensor
Active sensor, 1880mm
TRW GBS2075 ABS sensor
Active sensor, 1265mm
TRW GBS2071 ABS sensor
Active sensor, 1280mm
TRW GBS2011 ABS sensor
Active sensor, 1105mm
TRW GBS2069 ABS sensor
Active sensor, 1105mm
TRW GBS2074 ABS sensor
Active sensor, 955mm
TRW GBS2079 ABS sensor
Passive sensor, 1160mm
TRW GBS2098 ABS sensor
Active sensor, 1880mm
TRW GBS2051 ABS sensor
Active sensor, 1155mm
TRW Abs sensor: What is the price of this product for the FIAT PUNTO?
The price of TRW products in the category Abs sensor for the FIAT PUNTO ranges from £26,00 to £100,00, depending on the features and specifications.
faq
DIY repair is only possible if the ABS malfunction is caused by faulty wheel speed sensors. Due to their location, they are highly exposed to moisture and dirt and therefore often fail. In some cases, it is enough to clean the sensitive element with a dry soft lint-free cloth. If this doesn’t work, replace the component.
If a malfunction of the anti-lock braking system is caused by a failure of the electronic control unit or a hydraulic unit, you will need professional assistance. Visit a car repair shop.
First, inspect the component. Cracks on its housing, torn and oxidised wires, and a damaged connector indicate a malfunction.
Use a multimeter for thorough diagnostics. Before you start testing the component, check how the wheel speed sensors are installed in your car. You can find this information in the vehicle repair manual.
You will need to raise the car and most likely to remove the wheel in order to access the part. Next, disconnect the wire from the ABS control unit. Connect the multimeter probes to the sensor contacts and measure resistance. Compare the received values with nominal data – they are usually specified in the car owner’s manual. As a rule, these values vary within the range of 0,5–2,0 kiloohms.
The next step of testing is measuring the voltage on the sensor contacts. To do this, rotate the wheel with your hand at a frequency of about 1 cycle per second. With this frequency, the voltage should be 0,25–0,50 V.
This procedure is determined by the vehicle make and model. Typically, the steps are the following:
- Engage the parking brake and secure the axle opposite to the one on which you’re going to replace the component with wheel chocks. Raise the car.
- Remove the wheel.
- Unscrew the fasteners of the brake caliper, pull it aside and secure with a wire.
- Remove the brake pads and a disc.
- Unscrew the sensor fastening bolt and remove the component from its mounting seat.
- Disconnect the wire from the ABS control unit and car body.
- Install a new part by following all steps in reverse order.
Confidence in online shopping! You can return TRW abs sensor for FIAT PUNTO without explanation within 200 days after purchase and get your money back. How? Just use the Safe Order service on the checkout page. The service cost is only 2,99 €.
Each order from 120,00 € value of goods, include free shipping within Germany.
*Does not apply to large-size auto parts.
