Abs sensor VEMO FIAT SCUDO
FIAT SCUDO: VEMO Abs sensor
VEMO Wheel speed sensor: parts for popular FIAT SCUDO variants
Sensor ABS FIAT SCUDO: original-quality parts from top brands
Have you ever bought VEMO products from AUTODOC and do you want to share your experience? Help others make the best choice. Leave your feedback and recommendations
VEMO ABS wheel speed sensor FIAT SCUDO – high-quality parts from reputable brands
We offer VEMO brand produts in OEM quality. Find the right branded Abs sensor spare part your FIAT SCUDO car in our catagory.
VEMO 1020620 ABS sensor ring
Front axle both sides, Original VEMO Quality
VEMO 1078945 ABS sensor
Front Axle, with screw, Original VEMO Quality, for vehicles with ABS, Hall Sensor, 2-pin connector, 950, 885mm, 930mm, 12V
VEMO 1025581 ABS sensor
Rear Axle, Original VEMO Quality, for vehicles with ABS, 846mm, 12V
VEMO 1022272 ABS sensor
Rear Axle, Original VEMO Quality, for vehicles with ABS, 846mm, 12V
VEMO 1054615 ABS sensor
Rear Axle Left, Rear Axle Right
VEMO 1011693 ABS sensor
Front Axle, Original VEMO Quality, for vehicles with ABS, Inductive Sensor, 2-pin connector, 735mm, 825mm, 12V
VEMO 1023265 ABS sensor
Rear Axle, for vehicles with ABS, 1530mm, 12V
VEMO 1090111 ABS sensor ring
Front axle both sides, Original VEMO Quality
VEMO 1042572 ABS sensor
Front Axle Left, Original VEMO Quality, for vehicles with ABS, 12V
VEMO 1018087 ABS sensor
Front Axle, Original VEMO Quality, for vehicles with ABS, Hall Sensor, Active sensor, 2-pin connector, 1120mm, 1140mm, 12V
VEMO 1027273 ABS sensor
Front Axle Left, Front Axle Right, with cable, 2-pin connector, 800mm, angular
VEMO 1047117 ABS sensor
Front Axle Left, Front Axle Right
VEMO 1068896 ABS sensor
Front Axle Left, Original VEMO Quality, for vehicles with ABS, 12V
VEMO 1012760 ABS sensor
Front Axle Left, Front Axle Right, Original VEMO Quality, for vehicles with ABS, Active sensor, 2-pin connector, 1080mm, 1130mm, 12V
VEMO 1042486 ABS sensor
Rear Axle, Original VEMO Quality, for vehicles with ABS, Hall Sensor, Active sensor, 2-pin connector, 615mm, 650mm, 12V
VEMO Abs sensor: What is the price of this product for the FIAT SCUDO?
The price of VEMO products in the category Abs sensor for the FIAT SCUDO ranges from £4,00 to £48,00, depending on the features and specifications.
FAQ
DIY repair is only possible if the ABS malfunction is caused by faulty wheel speed sensors. Due to their location, they are highly exposed to moisture and dirt and therefore often fail. In some cases, it is enough to clean the sensitive element with a dry soft lint-free cloth. If this doesn’t work, replace the component.
If a malfunction of the anti-lock braking system is caused by a failure of the electronic control unit or a hydraulic unit, you will need professional assistance. Visit a car repair shop.
First, inspect the component. Cracks on its housing, torn and oxidised wires, and a damaged connector indicate a malfunction.
Use a multimeter for thorough diagnostics. Before you start testing the component, check how the wheel speed sensors are installed in your car. You can find this information in the vehicle repair manual.
You will need to raise the car and most likely to remove the wheel in order to access the part. Next, disconnect the wire from the ABS control unit. Connect the multimeter probes to the sensor contacts and measure resistance. Compare the received values with nominal data – they are usually specified in the car owner’s manual. As a rule, these values vary within the range of 0,5–2,0 kiloohms.
The next step of testing is measuring the voltage on the sensor contacts. To do this, rotate the wheel with your hand at a frequency of about 1 cycle per second. With this frequency, the voltage should be 0,25–0,50 V.
This procedure is determined by the vehicle make and model. Typically, the steps are the following:
- Engage the parking brake and secure the axle opposite to the one on which you’re going to replace the component with wheel chocks. Raise the car.
- Remove the wheel.
- Unscrew the fasteners of the brake caliper, pull it aside and secure with a wire.
- Remove the brake pads and a disc.
- Unscrew the sensor fastening bolt and remove the component from its mounting seat.
- Disconnect the wire from the ABS control unit and car body.
- Install a new part by following all steps in reverse order.
Confidence in online shopping! You can return VEMO abs sensor for FIAT SCUDO without explanation within 200 days after purchase and get your money back. How? Just use the Safe Order service on the checkout page. The service cost is only 2,99 €.
Each order from 120,00 € value of goods, include free shipping within Germany.
*Does not apply to large-size auto parts.
