Abs sensor ASHIKA FORD PUMA
FORD PUMA: ASHIKA Abs sensor
ASHIKA Wheel speed sensor: parts for popular FORD PUMA variants
Sensor ABS FORD PUMA: original-quality parts from top brands
Have you ever bought ASHIKA products from AUTODOC and do you want to share your experience? Help others make the best choice. Leave your feedback and recommendations
ASHIKA ABS wheel speed sensor FORD PUMA – high-quality parts from reputable brands
We offer ASHIKA brand produts in OEM quality. Find the right branded Abs sensor spare part your FORD PUMA car in our catagory.
ASHIKA 151-03-354 ABS sensor
Front Axle
ASHIKA 151-03-332 ABS sensor
Rear Axle both sides
ASHIKA 151-03-308 ABS sensor
Front axle both sides
ASHIKA 151-00-0201 ABS sensor
Rear Axle
ASHIKA 151-03-333 ABS sensor
Rear Axle both sides
ASHIKA 151-0H-H66 ABS sensor
Rear Axle Right
ASHIKA 151-02-235 ABS sensor
Rear Axle Left
ASHIKA 151-02-2013 ABS sensor
Left Front
ASHIKA 151-04-472 ABS sensor
Right Rear
ASHIKA 151-09-907 ABS sensor
Front, 1610mm
ASHIKA 151-02-246 ABS sensor
Rear Axle Left
ASHIKA 151-02-254 ABS sensor
Rear Axle Right
ASHIKA 151-0H-H97 ABS sensor
Rear Axle Left
ASHIKA 151-05-570 ABS sensor
Left Rear
ASHIKA 151-05-565 ABS sensor
Left Front
ASHIKA Abs sensor: What is the price of this product for the FORD PUMA?
The price of ASHIKA products in the category Abs sensor for the FORD PUMA ranges from £18,00 to £65,00, depending on the features and specifications.
faq
DIY repair is only possible if the ABS malfunction is caused by faulty wheel speed sensors. Due to their location, they are highly exposed to moisture and dirt and therefore often fail. In some cases, it is enough to clean the sensitive element with a dry soft lint-free cloth. If this doesn’t work, replace the component.
If a malfunction of the anti-lock braking system is caused by a failure of the electronic control unit or a hydraulic unit, you will need professional assistance. Visit a car repair shop.
First, inspect the component. Cracks on its housing, torn and oxidised wires, and a damaged connector indicate a malfunction.
Use a multimeter for thorough diagnostics. Before you start testing the component, check how the wheel speed sensors are installed in your car. You can find this information in the vehicle repair manual.
You will need to raise the car and most likely to remove the wheel in order to access the part. Next, disconnect the wire from the ABS control unit. Connect the multimeter probes to the sensor contacts and measure resistance. Compare the received values with nominal data – they are usually specified in the car owner’s manual. As a rule, these values vary within the range of 0,5–2,0 kiloohms.
The next step of testing is measuring the voltage on the sensor contacts. To do this, rotate the wheel with your hand at a frequency of about 1 cycle per second. With this frequency, the voltage should be 0,25–0,50 V.
This procedure is determined by the vehicle make and model. Typically, the steps are the following:
- Engage the parking brake and secure the axle opposite to the one on which you’re going to replace the component with wheel chocks. Raise the car.
- Remove the wheel.
- Unscrew the fasteners of the brake caliper, pull it aside and secure with a wire.
- Remove the brake pads and a disc.
- Unscrew the sensor fastening bolt and remove the component from its mounting seat.
- Disconnect the wire from the ABS control unit and car body.
- Install a new part by following all steps in reverse order.
Confidence in online shopping! You can return ASHIKA abs sensor for FORD PUMA without explanation within 200 days after purchase and get your money back. How? Just use the Safe Order service on the checkout page. The service cost is only 2,99 €.
Each order from 120,00 € value of goods, include free shipping within Germany.
*Does not apply to large-size auto parts.
