Abs sensor TRW FORD S-MAX
FORD S-MAX: TRW Abs sensor
TRW Wheel speed sensor: parts for popular FORD S-MAX variants
Sensor ABS FORD S-MAX: original-quality parts from top brands
Have you ever bought TRW products from AUTODOC and do you want to share your experience? Help others make the best choice. Leave your feedback and recommendations
TRW ABS wheel speed sensor FORD S-MAX – high-quality parts from reputable brands
We offer TRW brand produts in OEM quality. Find the right branded Abs sensor spare part your FORD S-MAX car in our catagory.
TRW GBS2169 ABS sensor
without cable, Active sensor, 38mm
TRW GBS1039 ABS sensor
without cable
TRW GBS2101 ABS sensor
without cable
TRW GBS3011 ABS sensor
Active sensor, 450mm
TRW GBS2842 ABS sensor
Active sensor, 675mm
TRW GBS2844 ABS sensor
Active sensor, 586mm
TRW GBS2785 ABS sensor
Active sensor, 323mm
TRW GBS2768 ABS sensor
Active sensor, 660mm
TRW GBS2766 ABS sensor
Active sensor, 815mm
TRW GBS2764 ABS sensor
Active sensor, 2022mm
TRW GBS2762 ABS sensor
Active sensor, 305mm
TRW GBS2760 ABS sensor
Active sensor, 356mm
TRW GBS2601 ABS sensor
Active sensor, 744mm
TRW GBS2166 ABS sensor
Active sensor, 706mm
TRW GBS2131 ABS sensor
Active sensor, 1080mm
TRW Abs sensor: What is the price of this product for the FORD S-MAX?
The price of TRW products in the category Abs sensor for the FORD S-MAX ranges from £21,00 to £72,00, depending on the features and specifications.
faq
DIY repair is only possible if the ABS malfunction is caused by faulty wheel speed sensors. Due to their location, they are highly exposed to moisture and dirt and therefore often fail. In some cases, it is enough to clean the sensitive element with a dry soft lint-free cloth. If this doesn’t work, replace the component.
If a malfunction of the anti-lock braking system is caused by a failure of the electronic control unit or a hydraulic unit, you will need professional assistance. Visit a car repair shop.
First, inspect the component. Cracks on its housing, torn and oxidised wires, and a damaged connector indicate a malfunction.
Use a multimeter for thorough diagnostics. Before you start testing the component, check how the wheel speed sensors are installed in your car. You can find this information in the vehicle repair manual.
You will need to raise the car and most likely to remove the wheel in order to access the part. Next, disconnect the wire from the ABS control unit. Connect the multimeter probes to the sensor contacts and measure resistance. Compare the received values with nominal data – they are usually specified in the car owner’s manual. As a rule, these values vary within the range of 0,5–2,0 kiloohms.
The next step of testing is measuring the voltage on the sensor contacts. To do this, rotate the wheel with your hand at a frequency of about 1 cycle per second. With this frequency, the voltage should be 0,25–0,50 V.
This procedure is determined by the vehicle make and model. Typically, the steps are the following:
- Engage the parking brake and secure the axle opposite to the one on which you’re going to replace the component with wheel chocks. Raise the car.
- Remove the wheel.
- Unscrew the fasteners of the brake caliper, pull it aside and secure with a wire.
- Remove the brake pads and a disc.
- Unscrew the sensor fastening bolt and remove the component from its mounting seat.
- Disconnect the wire from the ABS control unit and car body.
- Install a new part by following all steps in reverse order.
Confidence in online shopping! You can return TRW abs sensor for FORD S-MAX without explanation within 200 days after purchase and get your money back. How? Just use the Safe Order service on the checkout page. The service cost is only 2,99 €.
Each order from 120,00 € value of goods, include free shipping within Germany.
*Does not apply to large-size auto parts.
