Abs sensor TRW OPEL INSIGNIA
OPEL INSIGNIA: TRW Abs sensor
TRW Wheel speed sensor: parts for popular OPEL INSIGNIA variants
Sensor ABS OPEL INSIGNIA: original-quality parts from top brands
Have you ever bought TRW products from AUTODOC and do you want to share your experience? Help others make the best choice. Leave your feedback and recommendations
TRW ABS wheel speed sensor OPEL INSIGNIA – high-quality parts from reputable brands
We offer TRW brand produts in OEM quality. Find the right branded Abs sensor spare part your OPEL INSIGNIA car in our catagory.
TRW GBS2152 ABS sensor
Active sensor, 740mm
TRW GBS2163 ABS sensor
950mm
TRW GBS1907 ABS sensor
Active sensor, 1460mm
TRW GBS1908 ABS sensor
Active sensor, 750mm
TRW GBS2839 ABS sensor
Active sensor, 53mm
TRW GBS2717 ABS sensor
Active sensor, 730mm
TRW GBS2560 ABS sensor
Active sensor, 730mm
TRW GBS2307 ABS sensor
Passive sensor, 623mm, 605mm
TRW GBS2548 ABS sensor
Passive sensor, 790mm
TRW GBS2155 ABS sensor
Active sensor, 800mm
TRW GBS2621 ABS sensor
Active sensor, 1146mm
TRW GBS2694 ABS sensor
Active sensor, 956mm
TRW GBS2840 ABS sensor
Active sensor, 654mm
TRW GBS2127 ABS sensor
Active sensor, 1070mm
TRW GBS159 ABS sensor
Active sensor, 945mm
TRW Abs sensor: What is the price of this product for the OPEL INSIGNIA?
The price of TRW products in the category Abs sensor for the OPEL INSIGNIA ranges from £13,00 to £75,00, depending on the features and specifications.
faq
DIY repair is only possible if the ABS malfunction is caused by faulty wheel speed sensors. Due to their location, they are highly exposed to moisture and dirt and therefore often fail. In some cases, it is enough to clean the sensitive element with a dry soft lint-free cloth. If this doesn’t work, replace the component.
If a malfunction of the anti-lock braking system is caused by a failure of the electronic control unit or a hydraulic unit, you will need professional assistance. Visit a car repair shop.
First, inspect the component. Cracks on its housing, torn and oxidised wires, and a damaged connector indicate a malfunction.
Use a multimeter for thorough diagnostics. Before you start testing the component, check how the wheel speed sensors are installed in your car. You can find this information in the vehicle repair manual.
You will need to raise the car and most likely to remove the wheel in order to access the part. Next, disconnect the wire from the ABS control unit. Connect the multimeter probes to the sensor contacts and measure resistance. Compare the received values with nominal data – they are usually specified in the car owner’s manual. As a rule, these values vary within the range of 0,5–2,0 kiloohms.
The next step of testing is measuring the voltage on the sensor contacts. To do this, rotate the wheel with your hand at a frequency of about 1 cycle per second. With this frequency, the voltage should be 0,25–0,50 V.
This procedure is determined by the vehicle make and model. Typically, the steps are the following:
- Engage the parking brake and secure the axle opposite to the one on which you’re going to replace the component with wheel chocks. Raise the car.
- Remove the wheel.
- Unscrew the fasteners of the brake caliper, pull it aside and secure with a wire.
- Remove the brake pads and a disc.
- Unscrew the sensor fastening bolt and remove the component from its mounting seat.
- Disconnect the wire from the ABS control unit and car body.
- Install a new part by following all steps in reverse order.
Confidence in online shopping! You can return TRW abs sensor for OPEL INSIGNIA without explanation within 200 days after purchase and get your money back. How? Just use the Safe Order service on the checkout page. The service cost is only 2,99 €.
Each order from 120,00 € value of goods, include free shipping within Germany.
*Does not apply to large-size auto parts.
