Abs sensor VEMO SEAT ALTEA
SEAT ALTEA: VEMO Abs sensor
VEMO Wheel speed sensor: parts for popular SEAT ALTEA variants
Sensor ABS SEAT ALTEA: original-quality parts from top brands
Have you ever bought VEMO products from AUTODOC and do you want to share your experience? Help others make the best choice. Leave your feedback and recommendations
VEMO ABS wheel speed sensor SEAT ALTEA – high-quality parts from reputable brands
We offer VEMO brand produts in OEM quality. Find the right branded Abs sensor spare part your SEAT ALTEA car in our catagory.
VEMO 1039811 ABS sensor
Rear Axle Right, without cable, for vehicles with ABS, Hall Sensor, Active sensor, 2-pin connector, 12V, black, D Shape
VEMO 1091198 ABS sensor
Front Axle Left, D Shape
VEMO 1038079 ABS sensor
Inlet, Original VEMO Quality, 12V
VEMO 1026038 ABS sensor ring
Rear Axle both sides, Original VEMO Quality
VEMO 1038723 ABS sensor ring
Rear Axle both sides, Original VEMO Quality
VEMO 1017065 ABS sensor
without cable, for vehicles with ABS, Hall Sensor, Active sensor, 2-pin connector, 12V, black, D Shape
VEMO 1011375 ABS sensor
without cable, for vehicles with ABS, Hall Sensor, Active sensor, 2-pin connector, 12V, black, D Shape
VEMO 1080996 ABS sensor
Rear Axle Left, without cable, for vehicles with ABS, Hall Sensor, Active sensor, 2-pin connector, 12V, black, D Shape
VEMO 1011914 ABS sensor ring
Front Axle, Original VEMO Quality
VEMO 1013382 ABS sensor
Rear Axle Right, without cable, Original VEMO Quality, for vehicles with ABS, Hall Sensor, Active sensor, 2-pin connector, 12V
VEMO 1049906 ABS sensor
Front Axle Left, Front Axle Right, with cable, for vehicles with ABS, Inductive Sensor, Passive sensor, 4-pin connector, 1750 Ohm, 1000mm, 1035mm, 12V
VEMO 1031873 ABS sensor
Front Axle Right, without cable, for vehicles with ABS, Hall Sensor, Active sensor, 2-pin connector, 12V, D Shape
VEMO 1059073 ABS sensor
without cable, for vehicles with ABS, Hall Sensor, Active sensor, 2-pin connector, 12V, grey, D Shape
VEMO 1008485 ABS sensor
Rear Axle, with cable, for vehicles with ABS, Inductive Sensor, Passive sensor, 2-pin connector, 1100 Ohm, 1160mm, 1220, 1285mm, 12V, black
VEMO 1050170 ABS sensor
Rear Axle, with cable, for vehicles with ABS, Inductive Sensor, Passive sensor, 2-pin connector, 1100 Ohm, 250mm, 290mm, 12V
VEMO Abs sensor: What is the price of this product for the SEAT ALTEA?
The price of VEMO products in the category Abs sensor for the SEAT ALTEA ranges from £6,00 to £70,00, depending on the features and specifications.
faq
DIY repair is only possible if the ABS malfunction is caused by faulty wheel speed sensors. Due to their location, they are highly exposed to moisture and dirt and therefore often fail. In some cases, it is enough to clean the sensitive element with a dry soft lint-free cloth. If this doesn’t work, replace the component.
If a malfunction of the anti-lock braking system is caused by a failure of the electronic control unit or a hydraulic unit, you will need professional assistance. Visit a car repair shop.
First, inspect the component. Cracks on its housing, torn and oxidised wires, and a damaged connector indicate a malfunction.
Use a multimeter for thorough diagnostics. Before you start testing the component, check how the wheel speed sensors are installed in your car. You can find this information in the vehicle repair manual.
You will need to raise the car and most likely to remove the wheel in order to access the part. Next, disconnect the wire from the ABS control unit. Connect the multimeter probes to the sensor contacts and measure resistance. Compare the received values with nominal data – they are usually specified in the car owner’s manual. As a rule, these values vary within the range of 0,5–2,0 kiloohms.
The next step of testing is measuring the voltage on the sensor contacts. To do this, rotate the wheel with your hand at a frequency of about 1 cycle per second. With this frequency, the voltage should be 0,25–0,50 V.
This procedure is determined by the vehicle make and model. Typically, the steps are the following:
- Engage the parking brake and secure the axle opposite to the one on which you’re going to replace the component with wheel chocks. Raise the car.
- Remove the wheel.
- Unscrew the fasteners of the brake caliper, pull it aside and secure with a wire.
- Remove the brake pads and a disc.
- Unscrew the sensor fastening bolt and remove the component from its mounting seat.
- Disconnect the wire from the ABS control unit and car body.
- Install a new part by following all steps in reverse order.
Confidence in online shopping! You can return VEMO abs sensor for SEAT ALTEA without explanation within 200 days after purchase and get your money back. How? Just use the Safe Order service on the checkout page. The service cost is only 2,99 €.
Each order from 120,00 € value of goods, include free shipping within Germany.
*Does not apply to large-size auto parts.
