Abs sensor TOPRAN SEAT ATECA
SEAT ATECA: TOPRAN Abs sensor
TOPRAN Wheel speed sensor: parts for popular SEAT ATECA variants
Sensor ABS SEAT ATECA: original-quality parts from top brands
Have you ever bought TOPRAN products from AUTODOC and do you want to share your experience? Help others make the best choice. Leave your feedback and recommendations
TOPRAN ABS wheel speed sensor SEAT ATECA – high-quality parts from reputable brands
We offer TOPRAN brand produts in OEM quality. Find the right branded Abs sensor spare part your SEAT ATECA car in our catagory.
TOPRAN 116 755 001 ABS sensor
Rear Axle Left, Rear Axle Right, without cable, for vehicles with ABS, Hall Sensor, 2-pin connector, 75mm, D Shape
TOPRAN 121 336 001 ABS sensor
Rear Axle Left, Rear Axle Right, without cable, for vehicles with ABS, Hall Sensor, 2-pin connector, 85mm, D Shape
TOPRAN 109 482 001 ABS sensor ring
Front axle both sides
TOPRAN 110 485 001 ABS sensor
Front Axle Left, Front Axle Right, with cable, for vehicles with ABS, 1040mm
TOPRAN 115 180 001 ABS sensor
Rear Axle Right, without cable, for vehicles with ABS, Hall Sensor, 2-pin connector, 75mm, D Shape
TOPRAN 111 074 001 ABS sensor
Rear Axle Left, Rear Axle Right, with cable, for vehicles with ABS, 2-pin connector
TOPRAN 110 604 001 ABS sensor
without cable, for vehicles with ABS, 2-pin connector, 65mm, D Shape
TOPRAN 112 228 001 ABS sensor
with cable, for vehicles with ABS, 560mm
TOPRAN 110 611 001 ABS sensor
Rear Axle Right, without cable, for vehicles with ABS, 2-pin connector, 78mm, D Shape
TOPRAN 110 490 001 ABS sensor
Front Axle Left, Front Axle Right, with cable, for vehicles with ABS, 555mm
TOPRAN 638 663 001 ABS sensor
Rear Axle Right, without cable, for vehicles with ABS, Hall Sensor, 2-pin connector, D Shape
TOPRAN 116 805 001 ABS sensor
with cable, for vehicles with ABS, 4-pin connector, 1163mm
TOPRAN 110 605 001 ABS sensor
without cable, for vehicles with ABS, 2-pin connector, 65mm, D Shape
TOPRAN 111 073 001 ABS sensor
Front Axle Left, Front Axle Right, with cable, for vehicles with ABS, 2-pin connector, 1185mm
TOPRAN 115 251 001 ABS sensor
with cable, with rubber grommet, for vehicles with ABS, 1450mm
TOPRAN Abs sensor: What is the price of this product for the SEAT ATECA?
The price of TOPRAN products in the category Abs sensor for the SEAT ATECA ranges from £6,00 to £29,00, depending on the features and specifications.
faq
DIY repair is only possible if the ABS malfunction is caused by faulty wheel speed sensors. Due to their location, they are highly exposed to moisture and dirt and therefore often fail. In some cases, it is enough to clean the sensitive element with a dry soft lint-free cloth. If this doesn’t work, replace the component.
If a malfunction of the anti-lock braking system is caused by a failure of the electronic control unit or a hydraulic unit, you will need professional assistance. Visit a car repair shop.
First, inspect the component. Cracks on its housing, torn and oxidised wires, and a damaged connector indicate a malfunction.
Use a multimeter for thorough diagnostics. Before you start testing the component, check how the wheel speed sensors are installed in your car. You can find this information in the vehicle repair manual.
You will need to raise the car and most likely to remove the wheel in order to access the part. Next, disconnect the wire from the ABS control unit. Connect the multimeter probes to the sensor contacts and measure resistance. Compare the received values with nominal data – they are usually specified in the car owner’s manual. As a rule, these values vary within the range of 0,5–2,0 kiloohms.
The next step of testing is measuring the voltage on the sensor contacts. To do this, rotate the wheel with your hand at a frequency of about 1 cycle per second. With this frequency, the voltage should be 0,25–0,50 V.
This procedure is determined by the vehicle make and model. Typically, the steps are the following:
- Engage the parking brake and secure the axle opposite to the one on which you’re going to replace the component with wheel chocks. Raise the car.
- Remove the wheel.
- Unscrew the fasteners of the brake caliper, pull it aside and secure with a wire.
- Remove the brake pads and a disc.
- Unscrew the sensor fastening bolt and remove the component from its mounting seat.
- Disconnect the wire from the ABS control unit and car body.
- Install a new part by following all steps in reverse order.
Confidence in online shopping! You can return TOPRAN abs sensor for SEAT ATECA without explanation within 200 days after purchase and get your money back. How? Just use the Safe Order service on the checkout page. The service cost is only 2,99 €.
Each order from 120,00 € value of goods, include free shipping within Germany.
*Does not apply to large-size auto parts.
