TRW Abs sensor SEAT
TRW Abs sensor SEAT: great offers!
TRW Wheel speed sensor the most common models of SEAT
Sensor ABS SEAT: high-quality parts from top brands
The top-selling parts SEAT: TRW Abs sensor
You can select your Abs sensor SEAT out of a(n) TRW selection of high quality products. All of our car parts are of the highest TRW brand quality, despite our low prices.
TRW GBS2503 ABS sensor
with accessories, Passive sensor, 73mm
TRW GBS2528 ABS sensor
with accessories, Active sensor, 62mm
TRW GBS2515 ABS sensor
with accessories, Active sensor, 66mm
TRW GBS2529 ABS sensor
with accessories, Active sensor, 62mm
TRW GBS2527 ABS sensor
with accessories, Passive sensor, 1135mm
TRW GBS2514 ABS sensor
with accessories, Active sensor, 62mm
TRW GBS2936 ABS sensor
Active sensor, 62mm
TRW GBS2933 ABS sensor
Active sensor, 62mm, oval
TRW GBS2831 ABS sensor
Active sensor, 62mm, oval
TRW GBS2829 ABS sensor
Active sensor, 85mm
TRW GBS2141 ABS sensor
Active sensor, 479mm
TRW GBS2091 ABS sensor
Passive sensor, 1835mm
TRW GBS2060 ABS sensor
Active sensor, 1031mm
TRW GBS2023 ABS sensor
Passive sensor, 474mm
TRW GBS1008 ABS sensor
Active sensor, 66mm
TRW Abs sensor: What is the price of this product for the SEAT?
The price of TRW products in the category Abs sensor for the SEAT ranges from 19,00 to 135,00 €, depending on the features and specifications.
faq
DIY repair is only possible if the ABS malfunction is caused by faulty wheel speed sensors. Due to their location, they are highly exposed to moisture and dirt and therefore often fail. In some cases, it is enough to clean the sensitive element with a dry soft lint-free cloth. If this doesn’t work, replace the component.
If a malfunction of the anti-lock braking system is caused by a failure of the electronic control unit or a hydraulic unit, you will need professional assistance. Visit a car repair shop.
First, inspect the component. Cracks on its housing, torn and oxidised wires, and a damaged connector indicate a malfunction.
Use a multimeter for thorough diagnostics. Before you start testing the component, check how the wheel speed sensors are installed in your car. You can find this information in the vehicle repair manual.
You will need to raise the car and most likely to remove the wheel in order to access the part. Next, disconnect the wire from the ABS control unit. Connect the multimeter probes to the sensor contacts and measure resistance. Compare the received values with nominal data – they are usually specified in the car owner’s manual. As a rule, these values vary within the range of 0,5–2,0 kiloohms.
The next step of testing is measuring the voltage on the sensor contacts. To do this, rotate the wheel with your hand at a frequency of about 1 cycle per second. With this frequency, the voltage should be 0,25–0,50 V.
This procedure is determined by the vehicle make and model. Typically, the steps are the following:
- Engage the parking brake and secure the axle opposite to the one on which you’re going to replace the component with wheel chocks. Raise the car.
- Remove the wheel.
- Unscrew the fasteners of the brake caliper, pull it aside and secure with a wire.
- Remove the brake pads and a disc.
- Unscrew the sensor fastening bolt and remove the component from its mounting seat.
- Disconnect the wire from the ABS control unit and car body.
- Install a new part by following all steps in reverse order.
Confidence in online shopping! You can return TRW abs sensor for SEAT without explanation within 200 days after purchase and get your money back. How? Just use the Safe Order service on the checkout page. The service cost is only 2,99 €.
Each order from 120,00 € value of goods, include free shipping within Germany.
*Does not apply to large-size auto parts.
