Ble h2zero prepare

CMakeLists.txt

@@ -78,8 +78,6 @@ set(CORE_SRCS
 set(ARDUINO_ALL_LIBRARIES
   ArduinoOTA
   AsyncUDP
-  BLE
-  BluetoothSerial
   DNSServer
   EEPROM
   ESP_I2S
@@ -100,7 +98,6 @@ set(ARDUINO_ALL_LIBRARIES
   RainMaker
   SD_MMC
   SD
-  SimpleBLE
   SPIFFS
   SPI
   Ticker
@@ -109,7 +106,6 @@ set(ARDUINO_ALL_LIBRARIES
   WebServer
   NetworkClientSecure
   WiFi
-  WiFiProv
   Wire
   )
 
@@ -118,12 +114,6 @@ set(ARDUINO_LIBRARY_ArduinoOTA_REQUIRES esp_https_ota)
 
 set(ARDUINO_LIBRARY_AsyncUDP_SRCS libraries/AsyncUDP/src/AsyncUDP.cpp)
 
-set(ARDUINO_LIBRARY_BluetoothSerial_SRCS
-  libraries/BluetoothSerial/src/BluetoothSerial.cpp
-  libraries/BluetoothSerial/src/BTAddress.cpp
-  libraries/BluetoothSerial/src/BTAdvertisedDeviceSet.cpp
-  libraries/BluetoothSerial/src/BTScanResultsSet.cpp)
-
 set(ARDUINO_LIBRARY_DNSServer_SRCS libraries/DNSServer/src/DNSServer.cpp)
 
 set(ARDUINO_LIBRARY_EEPROM_SRCS libraries/EEPROM/src/EEPROM.cpp)
@@ -181,8 +171,6 @@ set(ARDUINO_LIBRARY_SD_SRCS
   libraries/SD/src/sd_diskio.cpp
   libraries/SD/src/sd_diskio_crc.c)
 
-set(ARDUINO_LIBRARY_SimpleBLE_SRCS libraries/SimpleBLE/src/SimpleBLE.cpp)
-
 set(ARDUINO_LIBRARY_SPIFFS_SRCS libraries/SPIFFS/src/SPIFFS.cpp)
 
 set(ARDUINO_LIBRARY_SPI_SRCS libraries/SPI/src/SPI.cpp)
@@ -231,42 +219,8 @@ set(ARDUINO_LIBRARY_WiFi_SRCS
   libraries/WiFi/src/STA.cpp
   libraries/WiFi/src/AP.cpp)
 
-set(ARDUINO_LIBRARY_WiFiProv_SRCS libraries/WiFiProv/src/WiFiProv.cpp)
-
 set(ARDUINO_LIBRARY_Wire_SRCS libraries/Wire/src/Wire.cpp)
 
-set(ARDUINO_LIBRARY_BLE_SRCS
-  libraries/BLE/src/BLE2902.cpp
-  libraries/BLE/src/BLE2904.cpp
-  libraries/BLE/src/BLEAddress.cpp
-  libraries/BLE/src/BLEAdvertisedDevice.cpp
-  libraries/BLE/src/BLEAdvertising.cpp
-  libraries/BLE/src/BLEBeacon.cpp
-  libraries/BLE/src/BLECharacteristic.cpp
-  libraries/BLE/src/BLECharacteristicMap.cpp
-  libraries/BLE/src/BLEClient.cpp
-  libraries/BLE/src/BLEDescriptor.cpp
-  libraries/BLE/src/BLEDescriptorMap.cpp
-  libraries/BLE/src/BLEDevice.cpp
-  libraries/BLE/src/BLEEddystoneTLM.cpp
-  libraries/BLE/src/BLEEddystoneURL.cpp
-  libraries/BLE/src/BLEExceptions.cpp
-  libraries/BLE/src/BLEHIDDevice.cpp
-  libraries/BLE/src/BLERemoteCharacteristic.cpp
-  libraries/BLE/src/BLERemoteDescriptor.cpp
-  libraries/BLE/src/BLERemoteService.cpp
-  libraries/BLE/src/BLEScan.cpp
-  libraries/BLE/src/BLESecurity.cpp
-  libraries/BLE/src/BLEServer.cpp
-  libraries/BLE/src/BLEService.cpp
-  libraries/BLE/src/BLEServiceMap.cpp
-  libraries/BLE/src/BLEUtils.cpp
-  libraries/BLE/src/BLEUUID.cpp
-  libraries/BLE/src/BLEValue.cpp
-  libraries/BLE/src/FreeRTOS.cpp
-  libraries/BLE/src/GeneralUtils.cpp
-  )
-
 set(ARDUINO_LIBRARIES_SRCS)
 set(ARDUINO_LIBRARIES_REQUIRES)
 set(ARDUINO_LIBRARIES_INCLUDEDIRS)
@@ -287,7 +241,7 @@ endforeach()
 set(includedirs variants/${CONFIG_ARDUINO_VARIANT}/ cores/esp32/ ${ARDUINO_LIBRARIES_INCLUDEDIRS})
 set(srcs ${CORE_SRCS} ${ARDUINO_LIBRARIES_SRCS})
 set(priv_includes cores/esp32/libb64)
-set(requires spi_flash esp_partition mbedtls wifi_provisioning wpa_supplicant esp_adc esp_eth http_parser)
+set(requires spi_flash esp_partition mbedtls wpa_supplicant esp_adc esp_eth http_parser)
 set(priv_requires fatfs nvs_flash app_update spiffs bootloader_support bt esp_hid usb esp_psram ${ARDUINO_LIBRARIES_REQUIRES})
 
 idf_component_register(INCLUDE_DIRS ${includedirs} PRIV_INCLUDE_DIRS ${priv_includes} SRCS ${srcs} REQUIRES ${requires} PRIV_REQUIRES ${priv_requires})

Kconfig.projbuild

@@ -379,24 +379,4 @@ config ARDUINO_SELECTIVE_NetworkClientSecure
     depends on ARDUINO_SELECTIVE_COMPILATION && ARDUINO_SELECTIVE_Network
     default y
 
-config ARDUINO_SELECTIVE_WiFiProv
-    bool "Enable WiFiProv"
-    depends on ARDUINO_SELECTIVE_COMPILATION && ARDUINO_SELECTIVE_Network && ARDUINO_SELECTIVE_WiFi
-    default y
-
-config ARDUINO_SELECTIVE_BLE
-    bool "Enable BLE"
-    depends on ARDUINO_SELECTIVE_COMPILATION
-    default y
-
-config ARDUINO_SELECTIVE_BluetoothSerial
-    bool "Enable BluetoothSerial"
-    depends on ARDUINO_SELECTIVE_COMPILATION
-    default y
-
-config ARDUINO_SELECTIVE_SimpleBLE
-    bool "Enable SimpleBLE"
-    depends on ARDUINO_SELECTIVE_COMPILATION
-    default y
-
 endmenu