Open Source Linux Simulation Software

OpenFOAM - The Open Source CFD Toolbox. OpenFOAM is a generic, programmable software tool for Computational Fluid Dynamics (CFD). For more information, see: - Main Website: https://openfoam.org - C++ Source Documentation: https://cpp.openfoam.org - Issue (Bug) Tracking: https://bugs.openfoam.org - User Guide: https://cfd.direct/openfoam/user-guide

cfMesh is an open-source library for volume mesh generation based on OpenFOAM. It implements various meshing workflows for volume mesh generation needed for CFD simulations with OpenFOAM. It is already a part of foam-extend, OpenFOAM for Windows, Caelus and OpenFOAM+ released by ESI. This repository is intended for contribution and collaborative development. If you have a new meshing algorithm or interested in contributing to cfMesh, do not hesitate to contact us. Please note that this code is not the same as CF-MESH+, which is a commercial product offered by Creative Fields Holding.

The goal of this project is to open the OpenFOAM CFD toolbox to community contributed extensions. Visit https://sourceforge.net/p/openfoam-extend/wiki/Home/ for more information. OPENFOAM(R) is a registered trademark of OpenCFD Limited.

The foam-extend project is a fork of the OpenFOAM® open source library for Computational Fluid Dynamics (CFD). The goal of this project is to integrate community contributions to the foam-extend CFD simulation toolbox. It is an open project welcoming and integrating contributions from all users and developers.

OpenVLAB is an open source integrated framework for the numerical simulation of fluid flows (CFD) based on the resolution of Navier-Stokes equations. It is designed for analysis, design & optimization on airfoils, wings, wind-turbine, and much more..

OpenFVM is a general open source three-dimensional Computational Fluid Dynamics (CFD) solver (for Linux and Windows). It uses the unstructured finite volume method to simulate non-isothermal transient flow. Gmsh is used for pre- and post- processing.

Computational Fluid Dynamics (CFD) solver aimed to solve multi-physics problems on unstructured grids (inviscid Euler, Navier-Stokes flows, Heat transfer). F90 based. MPI, cgns, Metis libraries used.

ENGRID is a mesh generation software with CFD applications in mind. It supports automatic prismatic boundary layer grids for Navier-Stokes simulations and has a Qt based GUI.

CFDTool - "CFD Simulation Made Easy" CFDTool is a fluid dynamics toolbox for modeling and simulation of flows with coupled heat transfer. Based on FEATool Multiphysics (https://www.featool.com), CFDTool is specifically designed to make advanced fluid mechanics and heat transfer simulations both easy and enjoyable. - Completely stand-alone and cross-platform self-contained toolbox - Optionally use as MATLAB Add-On toolbox - Fully integrated and easy to use MATLAB GUI - Modeling and simulation in 1D, 2D, 3D, and axisymmetric/swirl/cylindrical coordinate systems - Seamless OpenFOAM GUI and SU2 CFD solver integrations (https://www.featool.com/Easy-to-Use-OpenFOAM-GUI) - Built-in geometry and CAD tools - Automatic mesh and grid generation - Pre-defined equations and boundary conditions for: + Incompressible viscous fluid flows (Navier-Stokes equations) + Compressible, supersonic, trans-sonic, and turbulent flows + Heat conduction with conjugate heat transfer

CFD scientific software. Provides simulation of 3D CFD problem based on Quasi-Gas Dynamics approach with radiation processes token into account. Lots of spectral intervals are considered. Parallel MPI/OpenMP-based implementation is provided.

Interactive mesh creation tool. Discretizer will create geometry and meshes for three dimensional flow simulations (CFD). Geometry import is not a goal: Discretizer will be furiously fast geometry builder(on many common engineering applications at least)

OpenFlower is a free and open source CFD code (for Linux and Windows) mainly intended to solve the turbulent incompressible Navier-Stokes equations with a LES approach. It can deal with arbitrary complex 3D geometries with its finite volume approach.

PRIN-3D (PRoto-code for Internal flows modeled by Navier-Stokes equations in 3-Dimensions) is a CFD code written in MATLAB, with turbulent and reactive capabilities.

CFD code using Arbitrary Lagrangian Eulerian algorithm.

CFDtools is a set of libraries to manage data format for CFD (mesh/grid and flow data). It provides additional tools for development of simulations softwares.

Flowlive is a CFD (Computational Fluid Dynamics) program with a special focus on multiphase flow with a Euler-Lagrange model.

HYP CFD is a structured, 3-D Navier-Stokes, MPI parallel multi-block computational fluid dynamics program for fluid thermophysics research, and high speed aerospace vehicle and propulsion applications.

LuaLB is an open-source parallelizable lattice Boltzmann simulation for computational fluid dynamics with Lua scripting.

Nuwtun is a Computational Fluid Dynamics code for solving the Euler and Navier-Stokes equations. Code is now hosted at https://bitbucket.org/cpraveen/nuwtun

PyAero is a toolkit developped at andheo for CFD software : post-processing, curve generation, … Currently PyAero focuses on ONERA's code "Cedre". PyAero is powered by Qt, Python, PySide, enthought and pyLot.

Computational fluid dynamics simulation for vortex dynamics

Translates OpenFOAM (Open Source CFD Toolbox, see http://sourceforge.net/projects/foam) data into MED format (see http://www.code-aster.org/outils/med). The initial goal to develop this utility was to be able integrate OpenFOAM functionality with SALOME

pyFoam is a Python front-end to the OpenFOAM (Open Source CFD Toolbox). It introduces interactivity into OpenFOAM, simplifies connection with third-party functionality and streamlines design of custom user solvers

RANSFOIL is a console program to calculate airflow field around an isolated airfoil in low-speed, subsonic, transonic or supersonic regime by numerically solving the Reynolds averaged Navier-Stokes (RANS) equations using mature computational fluid dynamics (CFD) method. As postprocess results, the aerodynamic parameters of the airfoil, e.g., lift coefficient and drag coefficient, can be integrated from the airflow distribution near wall boundary. In addition, the coupling between airflow and heat transfer and the effect of surface roughness on near wall flow are considered by this program, it can be used for engineering calculation of the friction drag and heat transfer coefficients on airfoil surface. RANSFOIL reads coordinates data from a 1D XYZ file which describes the grid points or control points on airfoil as only input, then outputs grid and solution files in 2D PLOT3D format to record grid coordinates and airflow data and a report file to show aerodynamic parameters.

The openFuelCell project is a forum to develop open source computational fluid dynamics (CFD) software to model fuel cells. Fuel cells http://en.wikipedia.org/wiki/Fuel_cell are devices that convert hydrogen and oxygen to water and electricity, and are promising renewable energy conversion devices. Computational fluid dynamics tools are used to size and rate fuel cell systems. OpenFoam is an open source CFD toolbox, available for downloading at http://www.openfoam.com/, written in C++ and conforming to the object-oriented paradigm.